BS ISO 13990-1-2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Vocabulary《纺织机械与附件 针织机用输纱器和纱控制器 词汇》.pdf

《BS ISO 13990-1-2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Vocabulary《纺织机械与附件 针织机用输纱器和纱控制器 词汇》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 13990-1-2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Vocabulary《纺织机械与附件 针织机用输纱器和纱控制器 词汇》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 13990-1:2006 Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary ICS 01.040.59; 59.120.40 BS ISO 13990-1:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 Febr

2、uary 2006 BSI 10 February 2006 ISBN 0 580 47147 0 National foreword This British Standard reproduces verbatim ISO 13990-1:2006 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsi

3、bility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of

4、organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence

5、 Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself

6、 confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 20, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last i

7、ssued. Amendments issued since publication Amd. No. Date Comments Reference numberINTERNATIONAL STANDARD ISO 13990-1 First edition 2006-01-15 Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary ISO 13990-1:2006(E) BS ISO 13990-1:2006ii BS ISO 1399

8、0-1:2006iii Contents Page Foreword. v Scope 1 Terms and definitions 2 Annex A (informative) Example for arrangement of yarn feeders on circular knitting machines . 18 Alphabetical index . 20 French alphabetical index (Index alphabtique). 21 German alphabetical index (Alphabetisches Stichwortverzeich

9、nis) . 22 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for

10、 which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on a

11、ll matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are

12、 circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held re

13、sponsible for identifying any or all such patent rights. ISO 13990-1 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial laundering, Subcommittee SC 3, Machinery for fabric manufacturing including preparatory machinery and accessories. This

14、 first edition of ISO 13990-1, together with ISO 13990-2 and ISO 13990-3, cancels and replaces ISO 13990:1996, of which it constitutes a technical revision. ISO 13990 consists of the following parts, under the general title Textile machinery and accessories Yarn feeders and yarn control for knitting

15、 machines: Part 1: Vocabulary Part 2: Connecting dimensions for yarn feeders and yarn control devices Part 3: Dimensions for connecting and interconnection cables iv BS ISO 13990-1:2006 1Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary Scope Th

16、is part of ISO 13990 establishes a vocabulary of basic terms relating to yarn feeders and yarn control of single thread for knitting machines. The figures illustrate solely the working principles of the various types of yarn feeder and yarn control. They do not represent the only, or even the most c

17、ommon, designs. NOTE In addition to terms and definitions used in two of the three official ISO languages (English and French), this part of ISO 13990 gives the equivalent terms and definitions in the German language; these are published under the responsibility of the member body for Germany (DIN).

18、 However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions. BS ISO 13990-1:2006BS ISO 13990-1:2006 2 Terms and definitions 1 yarn feeder device, positioned in the yarn path between bobbin and needles, for feeding and/or delivering yarn NOT

19、E The term “feeder” here constitutes the technical generic term for yarn feeding devices/units. 1.1 positive feeder yarn feeder for delivering predetermined lengths of yarn 1.2 passive feeder yarn feeder used to support the yarn run-in and/or the feeding of a length of yarn as a function of the dema

20、nd of the needles and/or the yarn tension 1.3 yarn tension-controlled thread feeder yarn feeder that delivers yarn maintaining a predetermined parameter of the yarn tension 3 2 Types of yarn feeder 2.1 nip roller feeder positive feeder for delivering yarn by catching and carrying it between two cont

21、rarotating rollers See Figure 1. Figure 1 Nip roller feeder 2.2 disc nip roller feeder positive feeder for delivering yarn by catching and carrying it between a roller and a disc See Figure 2. BS ISO 13990-1:20064 Figure 2 Disc nip roller feeder 2.3 gearwheel feeder positive feeder for delivering ya

22、rn by catching and carrying it between two contrarotating, intermeshing gears See Figure 3. Figure 3 Gearwheel feeder BS ISO 13990-1:2006 52.4 tape feeder positive feeder for delivering yarn by catching and carrying it between a driving supply belt and a driven feed wheel See Figure 4. NOTE For adju

23、stable pulley, belt tensioner and yarn feeder support, see Figure A.1. Key 1 feed wheel 2 feed belt Figure 4 Tape feeder 2.5 capstan feeder positive feeder for delivering yarn by carrying it in a nonslip manner through multiple windings wrapped around a driven capstan roller without slippage See Fig

24、ure 5. NOTE For adjustable pulley, belt tensioner and yarn support, see Figure A.1. , BS ISO 13990-1:20066 Key 1 idle pulley 2 driving belt 3 driving pulley 4 windings drum 5 clutch pulley Figure 5 Capstan feeder 2.6 unrolling feeder elastomer feeder positive feeder for delivering elastomeric yarn b

25、y unrolling it from the circumference of a driven yarn bobbin See Figure 6. BS ISO 13990-1:2006 7 Key 1 driving pulley 2 yarn bobbin 3 unrolling roller Figure 6 Unrolling feeder 2.7 friction feeder feeder for delivering a length of yarn with slippage by winding it around a feedwheel driven at a peri

26、pheral speed higher than the speed of the yarn See Figure 7. BS ISO 13990-1:20068 Figure 7 Friction feeder 2.8 storage feeder feeder for providing a length of yarn on a rotating and/or stationary winding drum with overhead yarn withdrawal See Figure 8. BS ISO 13990-1:2006 9Key 1 thread 2 winding dru

27、m 3 tension ring Figure 8 Storage feeder 2.9 tension-controlled capstan feeder feeder for delivering a length of yarn by carrying it around a tension-controlled driven capstan roller (without slippage) See Figure 9. BS ISO 13990-1:200610 Key 1 winding drum 2 tension controller Figure 9 Tension-contr

28、olled capstan feeder 2.10 combined feeder yarn feeder capable of acting, by conversion, as either a positive feeder or a passive feeder See Figure 10. NOTE For driving pulley, idle pulley, and driving belt, see Figure 5; for adjustable pulley, belt tensioner, and yarn feeder support, see Figure A.1.

29、 BS ISO 13990-1:2006 11Key 1 positive feeder 2 motor 3 idle pulley 4 driving belt 5 driving pulley 6 clutch pulley 7 windings drum 8 passive feeder Figure 10 Combined feeder BS ISO 13990-1:200612 3 Types of yarn control devices for single threads3.1 thread-break control device device for recognition

30、 of broken threads 3.1.1 electro-mechanical thread- break control device device with a mechanical scanner for threads that gives a sign in case of thread break and, in addition, in case of minor thread tension See Figure 11. Key 1 thread 2 electrical contact 3 stop-motion feeler 4 thread guide eleme

31、nt Figure 11 Electro-mechanical thread break control device BS ISO 13990-1:2006 133.1.2 optical thread-break control device device with an optical scanner for threads that gives a sign in case of thread break and in case of non-moving or missing threads See Figure 12. Key 1 thread 2 transmitter 3 re

32、ceiver 4 connection cable Figure 12 Optical thread break control device 3.1.3 capacitance thread-break control device device with a capacitance scanner for threads that gives a sign in case of thread break and, additionally, in case of non- moving or missing threads See Figure 13. BS ISO 13990-1:200

33、614 Key 1 thread 2 transmitter 3 connection cable Figure 13 Capacitance thread break control device 3.2 thread-movement control device electro-mechanical, optical or capacitance device for recognition of thread movements 3.3 thread-tension control device device for control of thread tension 3.3.1 el

34、ectro-mechanical thread- tension control device device signaling a too high and/or too low tension of thread See Figure 14. BS ISO 13990-1:2006 15Key 1 thread 2 electrical contact 3 stop feeler Figure 14 Electro-mechanical thread tension control device 3.3.2 electronic thread-tension control device

35、device with an electronic sensor for thread tension control See Figure 15. Key 1 thread 2 sensor Figure 15 Electronic thread tension control device 3.4 thread-thickness control device device used to control the thickness of thread on running threads BS ISO 13990-1:200616 3.4.1 mechanical thread- thi

36、ckness control device knot catcher usually, a slitting pass in the thread path which prevents a passing of thread thickness so that the yarn tears off See Figure 16. Key 1 thread 2 slitting pass Figure 16 Knot catcher 3.4.2 electro-mechanical thread- thickness control device usually, a slitting pass

37、 in the thread path that is movable NOTE A thickness of thread cannot pass the slitting but can move it, thereby triggering a signal. BS ISO 13990-1:2006 173.4.3 electronic thread-thickness control device electronic thread-thickness control device assisted by sensor 4 connecting dimensions dimension

38、s for mounting and electrical installation for yarn feeders and yarn control for knitting machines 5 interconnection cable one-sided, open, flat belt cable for electric installation of thread- control devices 6 connecting cable closed cable for electric installation of feeders NOTE For making contac

39、t, feeder pins penetrate the isolation of the connecting cable. BS ISO 13990-1:200618 Annex A (informative) Example for arrangement of yarn feeders on circular knitting machines See Figure A.1. BS ISO 13990-1:2006 19Key 1 adjustable pulley 2 belt tensioner 3 yarm feeder support 4 drive belt 5 yarn f

40、eeder NOTE One or several relevant adjustable pulleys and drive belts are required for one or more feeding speeds. Figure A.1 Feeder arrangement BS ISO 13990-1:200620 Alphabetical index C capacitance thread-break control device 3.1.3 capstan feeder 2.5 combined feeder 2.10 connecting cable 6 connect

41、ing dimensions 4 D disc nip roller feeder 2.2 E elastomer feeder 2.6 electro-mechanical thread-break control device 3.1.1 electro-mechanical thread-tension control device 3.3.1 electro-mechanical thread- thickness control device 3.4.2 electronic thread-tension control device 3.3.2 electronic thread-

42、thickness control device 3.4.3 F friction feeder 2.7 G gearwheel feeder 2.3 I interconnection cable 5 K knot catcher 3.4.1 M mechanical thread-thickness control device 3.4.1 N nip roller feeder 2.1 O optical thread-break control device 3.1.2 P passive feeder 1.2 positive feeder 1.1 S storage feeder

43、2.8 T tape feeder 2.4 tension-controlled capstan feeder 2.9 thread movement control device 3.2 thread tension control device 3.3 thread-break control device 3.1 thread-thickness control device 3.4 U unrolling feeder 2.6 Y yarn feeder 1 yarn tension-controlled thread feeder 1.3 BS ISO 13990-1:2006bla

44、nkBS ISO BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British

45、Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while

46、using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscriber

47、s automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI w

48、ebsite at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European a

49、nd international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial disc