BS EN 62282-5-1-2012 Fuel cell technologies Portable fuel cell power systems Safety《燃料电池技术 便携式燃料电池发电系统 安全》.pdf

《BS EN 62282-5-1-2012 Fuel cell technologies Portable fuel cell power systems Safety《燃料电池技术 便携式燃料电池发电系统 安全》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62282-5-1-2012 Fuel cell technologies Portable fuel cell power systems Safety《燃料电池技术 便携式燃料电池发电系统 安全》.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFuel cell technologiesPart 5-1: Portable fuel cell power systems SafetyBS EN 62282-5-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under

2、 license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62282-5-1:2012. It is identical to IEC 62282-5-1:2012. It supersedes BS EN 62282-5-1:2007,which is withdrawn.The UK participat

3、ion in its preparation was entrusted to Technical Committee GEL/105, Fuel cell technologies.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible

4、 for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013.ISBN 978 0 580 60957 2 ICS 27.070 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Pol

5、icy and Strategy Committee on 31 January 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62282-5-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking perm

6、itted without license from IHS-,-,-EUROPEAN STANDARD EN 62282-5-1 NORME EUROPENNE EUROPISCHE NORM November 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue M

7、arnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62282-5-1:2012 E ICS 27.070 Supersedes EN 62282-5-1:2007English version Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety

8、(IEC 62282-5-1:2012) Technologies des piles combustible - Partie 5-1: Systmes piles combustible portables - Scurit (CEI 62282-5-1:2012) Brennstoffzellentechnologien - Teil 5-1: Portable Brennstoffzellen-Energiesysteme - Sicherheit (IEC 62282-5-1:2012) This European Standard was approved by CENELEC o

9、n 2012-10-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards ma

10、y be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and n

11、otified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, German

12、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62282-5-1:2012Copyright European Committee for Electrotechnical Standardization

13、Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62282-5-1:2012 Foreword The text of document 105/396/FDIS, future edition 2 of IEC 62282-5-1, prepared by IEC/TC 105 “Fuel cell technologies“ was submitted to the IEC-CENEL

14、EC parallel vote and approved by CENELEC as EN 62282-5-1:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-07-23 latest date by which the national standards conf

15、licting with the document have to be withdrawn (dow) 2015-10-23 This document supersedes EN 62282-5-1:2007. EN 62282-5-1:2012 includes the following significant technical changes with respect to EN 62282-5-1:2007: normative references and definitions have been updated (e.g., hazardous locations, mic

16、ro fuel cell power systems, transportable equipment, etc.); subclause 4.2.2 has been updated referencing an alternative test method in response to a comment; the limit on flammable atmospheres has been reduced from 50 % of LFL to 25 % of LFL in 4.5.4 and in 7.20; subclause 4.14 and the corresponding

17、 tests in 7.22 have been updated to include more effluents and criteria to establish if a system is suitable for indoor or outdoor operation; specific criteria for oxygen detector sensor performance requirements have been revised in 7.21; subclause 7.18 has been updated with a new test method and ne

18、w drop heights in response to comments; Table 1 has been added giving limits on emission of effluents using limits drawn from the micro fuel cell power system standard. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/o

19、r CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). BS EN 62282-5-1:2012Copyright European Committee for Ele

20、ctrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62282-5-1:2012 Endorsement notice The text of the International Standard IEC 62282-5-1:2012 was approved by CENELEC as a European Standard wit

21、hout any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60439-1 NOTE Harmonized as EN 60439-1. IEC 62282-6-100 NOTE Harmonized as EN 62282-6-100. ISO 15156-1 NOTE Harmonized as EN ISO 15156-1. BS EN 62282-5-1:2012Copyrig

22、ht European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62282-5-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding E

23、uropean publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme

24、nts) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60034 Series Rotating electrical machines EN 60034 Series IEC 60068-2-75 - Environmental testing - Part 2-75: Tests -

25、Test Eh: Hammer tests EN 60068-2-75 - IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements EN 60079-0 - IEC 60079-2 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure “p“ EN 60079-2 - IEC 60079-10 - Electrical apparatus for explosive gas atmosph

26、eres - Part 10: Classification of hazardous areas EN 60079-10- IEC 60079-15 - Explosive atmospheres - Part 15: Equipment protection by type of protection “n“ EN 60079-15 - IEC 60079-20-1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods an

27、d dataEN 60079-20-1 - IEC 60079-29-1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases EN 60079-29-1 - IEC 60086-4 - Primary batteries - Part 4: Safety of lithium batteries EN 60086-4 - IEC 60204-1 (mod) 2005 Safety of machinery - Electric

28、al equipment of machines - Part 1: General requirements EN 60204-1 + corr. February 2006 2010 IEC 60216-4-1 - Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 - IEC 60335-1 (mod) + corr. July + corr. April 2010 2010 2011 Hous

29、ehold and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1 2012 IEC 60364-4-41 - Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock HD 60364-4-41 - IEC 60529 - Degrees of protection provided by enclosures (IP Co

30、de) - - BS EN 62282-5-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62282-5-1:2012 Publication Year Title EN/HD Year IEC 60664-1 - Insulation coor

31、dination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 - IEC 60695-2-11 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products EN 60695-2-11 - IEC 60695-2-13 - Fire hazard testing

32、 - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials EN 60695-2-13 - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC 606

33、95-11-10 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods EN 60695-11-10 - IEC 60695-11-20 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods EN 60695-11-20 - IEC 60730-1 (mod) 2010 Automatic electrical controls for household a

34、nd similar use - Part 1: General requirements EN 60730-1 2011 IEC 60730-2-5- - Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems EN 60730-2-5 - IEC 60730-2-17 - Automatic electrical controls for household a

35、nd similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements - - IEC 60812 - Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) EN 60812 - IEC 60884-1 - Plugs and socket-outlets for househ

36、old and similar purposes - Part 1: General requirements - - IEC 60934 - Circuit-breakers for equipment (CBE) EN 60934 - IEC 60950-1 (mod) + corr. August 2005 2006 Information technology equipment - Safety - Part 1: General requirements EN 60950-1 + A11 + A12 + AC 2006 2009 2011 2011 IEC 60990 1999 M

37、ethods of measurement of touch current and protective conductor current EN 60990 1999 IEC 61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) EN 61000-3-2 - BS EN 62282-5-1:2012Copyright European Committe

38、e for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62282-5-1:2012 Publication Year Title EN/HD Year IEC 61000-3-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation

39、of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection EN 61000-3-3 - IEC 61000-6-1 - Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residen

40、tial, commercial and light-industrial environments EN 61000-6-1 - IEC 61000-6-2 - Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000-6-2 - IEC 61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission stand

41、ard for residential, commercial and light-industrial environments EN 61000-6-3 - IEC 61000-6-4 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments EN 61000-6-4 - IEC 61025 - Fault Tree Analysis (FTA) EN 61025 - IEC 61032 - Protection of

42、 persons and equipment by enclosures - Probes for verification EN 61032 - IEC 61140 - Protection against electric shock - Common aspects for installation and equipment EN 61140 - IEC 61439-1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules EN 61439-1 - IEC 61508-1 - Functi

43、onal safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements EN 61508-1 - IEC 61511-1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements E

44、N 61511-1 - IEC 61511-3 - Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels EN 61511-3 - IEC 61882 - Hazard and operability studies (HAZOP studies) - Application guide - - IEC 62040-1 - Uni

45、nterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS EN 62040-1 - IEC 62040-2 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements EN 62040-2 - IEC 62133 - Secondary cells and batteries containing alkaline or other non-acid el

46、ectrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications EN 62133 - BS EN 62282-5-1:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reprodu

47、ction or networking permitted without license from IHS-,-,-EN 62282-5-1:2012 Publication Year Title EN/HD Year IEC 62282-2 - Fuel cell technologies - Part 2: Fuel cell modules EN 62282-2 - ISO 3864 Series Graphical symbols - Safety colours and safety signs - - ISO 4080 - Rubber and plastics hoses an

48、d hose assemblies - Determination of permeability to gas EN ISO 4080 - ISO 7000 - Graphical symbols for use on equipment - Index and synopsis - - ISO 7010 - Graphical symbols - Safety colours and safety signs - Registered safety signs EN ISO 7010 - ISO 15649 - Petroleum and natural gas industries -

49、Piping - - ISO 16000-3 - Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method - - ISO 16000-6 - Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chro