BS EN 572-8-2012 Glass in building Basic soda lime silicate glass products Supplied and final cut sizes《建筑用玻璃 基本钠钙硅酸盐玻璃产品 提供尺寸和最终切割尺寸》.pdf

《BS EN 572-8-2012 Glass in building Basic soda lime silicate glass products Supplied and final cut sizes《建筑用玻璃 基本钠钙硅酸盐玻璃产品 提供尺寸和最终切割尺寸》.pdf》由会员分享，可在线阅读，更多相关《BS EN 572-8-2012 Glass in building Basic soda lime silicate glass products Supplied and final cut sizes《建筑用玻璃 基本钠钙硅酸盐玻璃产品 提供尺寸和最终切割尺寸》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 572-8:2012Glass in building Basic sodalime silicate glass productsPart 8: Supplied and final cut sizesCopyright European Committee for Standardization Provided by IHS under

2、 license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 572-8:2012. Itsupersedes BS EN 572-8:2004 which is withdrawn.The UK participation in its preparat

3、ion was entrusted to TechnicalCommittee B/520/1, Basic and transformed glass products.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its

4、 correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 76527 8ICS 81.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Str

5、ategy Committee on 31 July 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EUROPEAN STANDARD NORME EUROP

6、ENNE EUROPISCHE NORM EN 572-8 July 2012 ICS 81.040.20 Supersedes EN 572-8:2004English Version Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes Verre dans la construction - Produits verriers de silicate sodo-calcique de base - Partie 8: Mesures livres

7、 et mesures dcoupes finales Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 8: Liefermae und Festmae This European Standard was approved by CEN on 11 May 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving th

8、is European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official

9、versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Aust

10、ria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede

11、n, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Me

12、mbers. Ref. No. EN 572-8:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:2012 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Ter

13、ms and definitions .44 Glass products .85 Dimensional requirements 85.1 Manufacturing dimensions .85.1.1 Supplied sizes 85.1.2 Final cut sizes 85.2 Thickness .95.2.1 General 95.2.2 Tolerances 95.3 Length, width, and squareness . 106 Quality requirements 126.1 General . 126.2 Methods of observation a

14、nd measurement . 136.2.1 Optical faults . 136.2.2 Visual faults . 136.2.3 Edge defects for final cut sizes . 146.3 Acceptance levels . 156.3.1 Optical faults . 156.3.2 Visual faults . 15Annex A (normative) Test methods of examination for visual faults Spot faults and linear/extended faults . 22A.1 F

15、loat glass (EN 572-2:2012) . 22A.1.1 Method of observation . 22A.1.2 Linear/extended faults 22A.2 Polished wired glass (EN 572-3:2012) 22A.2.1 Spot faults . 22A.2.2 Linear/extended faults 23A.3 Drawn sheet glass (EN 572-4:2012) 23A.3.1 Spot faults . 23A.3.2 Linear/extended faults 23A.4 Patterned gla

16、ss (EN 572-5:2012) and wired patterned glass (EN 572-6:2012) Spot and linear/extended faults . 23Annex B (normative) Method for measuring spot fault size (including halo) 24B.1 Conditions of observation . 24B.2 Measurement of the size of the spot fault including the halo 25Bibliography . 26Copyright

17、 European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:2012 (E) 3 Foreword This document (EN 572-8:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in bu

18、ilding”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at the latest by January 2013.

19、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 572-8:2004. This document has been prepared under a manda

20、te given to CEN by the European Commission and the European Free Trade Association. This edition is a revision of EN 572-8:2004. The main changes in this edition are: a) a new method of determination of squareness; b) a new method of measurement for spot fault (including halo) and an adaptation of t

21、he related requirements. The European Standard EN 572:2012 “Glass in building Basic soda lime silicate glass products” consists of the following parts: Part 1: Definitions and general physical and mechanical properties; Part 2: Float glass; Part 3: Polished wired glass; Part 4: Drawn sheet glass; Pa

22、rt 5: Patterned glass; Part 6: Wired patterned glass; Part 7: Wired or unwired channel shaped glass; Part 8: Supplied and final cut sizes; Part 9: Evaluation of conformity/Product standard. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following count

23、ries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol

24、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:20

25、12 (E) 4 1 Scope This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for basic soda lime silicate glass products, as defined in EN 572-1:2012, for use in building. It applies to supplied sizes or cut sizes for final end use. This Eu

26、ropean Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m. This European Standard does not apply to float glass supplied as jumbo, split sizes or oversize plates nor to polished wired glass, drawn sheet glass, patterned glass, patterned

27、wired glass supplied as stock sizes. For specifications regarding these types of glass, see EN 572-2:2012, EN 572-3:2012, EN 572-4:2012, EN 572-5:2012 and EN 572-6:2012 respectively. This European Standard does not apply to final cut sizes of wired or unwired channel shaped glass For specifications

28、on this type of glass, see EN 572-7:2012. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of th

29、e referenced document (including any amendments) applies. EN 572-1:2012, Glass in building Basic soda lime silicate glass products Part 1: Definitions and general physical and mechanical properties EN 572-2:2012, Glass in building Basic soda lime silicate glass products Part 2: Float glass EN 572-3:

30、2012, Glass in building Basic soda lime silicate glass products Part 3: Polished wired glass EN 572-4:2012, Glass in building Basic soda lime silicate glass products Part 4: Drawn sheet glass EN 572-5:2012, Glass in building Basic soda lime silicate glass products Part 5: Patterned glass EN 572-6:20

31、12, Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass 3 Terms and definitions For the purposes of document, the terms and definitions given in EN 572-1:2012, EN 572-2:2012, EN 572-3:2012, EN 572-4:2012, EN 572-5:2012 and EN 572-6:2012 and the following apply. 3.

32、1 supplied size pane of glass that has been supplied either as raw material for further processing and/or cutting down to a size for installation Note 1 to entry: This is a size outside those given in EN 572-2:2012, EN 572-3:2012, EN 572-4:2012, EN 572-5:2012 and EN 572-6:2012, i.e. jumbo, split siz

33、es or oversize plates for float glass and supplied sizes for polished wired, drawn sheet, patterned and wired patterned glass. 3.2 final cut size pane of glass that has been cut down to the dimensions required either for installation or processing into a final product Copyright European Committee fo

34、r Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:2012 (E) 5 Note 1 to entry: Examples of processed final products are insulating glass units and thermally toughened safety glass of thos

35、e dimensions. 3.3 length, H, and width, B defined with reference to the direction of draw of the glass ribbon as shown in Figures 1 and 2 Key 1 direction of draw Figure 1 Relationship between length, width and direction of draw for float, polished wired, patterned and wired patterned glass Copyright

36、 European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:2012 (E) 6 Key 1 direction of draw Figure 2 Relationship between length, width and direction of draw for drawn she

37、et glass 3.4 optical fault fault which leads to distortions in the appearance of objects observed through the glass 3.5 visual fault fault which alters the visual quality of the glass Note 1 to entry: Visual faults include spot faults and linear/extend faults with patterned faults and/or wire faults

38、, depending on type of product. 3.6 spot fault spherical or quasi-spherical faults which are produced by differing mechanisms and are defined for a specific glass product type/manufacturing process 3.6.1 spot fault (float glass) nucleus which is generally accompanied by a halo of distorted glass SOU

39、RCE: EN 572-2:2012, 3.6 3.6.2 halo (float glass) area locally distorted, generally around a point defect SOURCE: EN 572-2:2012, 3.7 3.6.3 spherical or quasi-spherical spot fault (polished wired, patterned and wired patterned glass) spot fault whose larger dimension is less than or equal to twice the

40、 smaller dimension SOURCE: EN 572-3:2012, 3.5; EN 572-5:2012, 3.4; EN 572-6:2012, 3.4 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:2012 (E) 7 3.6.4 el

41、ongated spot fault (polished wired, patterned and wired patterned glass) spot fault whose larger dimension is more than twice the smaller dimension SOURCE: EN 572-3:2012, 3.6; EN 572-5:2012, 3.5; EN 572-6:2012, 3.5 3.6.5 spot fault (drawn sheet glass) fault which can be on or in the glass, in the fo

42、rm of gaseous inclusion, solid inclusion, mark or deposit of small size SOURCE: EN 572-4:2012, 3.8 3.7 concentration, c (drawn sheet glass) sum of the lengths of gaseous inclusions 1,0 mm in any circle of 400 mm diameter SOURCE: EN 572-4:2012, 3.11 3.8 linear/extended fault fault which can be on or

43、in the glass, in the form of deposits, marks or scratches that occupy an extended length or area 3.9 pattern fault (patterned and wired patterned glass) deviation of the pattern relative to a reference such as a line or straight edge SOURCE: EN 572-5:2012, 3.7; EN 572-6:2012, 3.7 3.10 deviation of t

44、he pattern (patterned and wired patterned glass) deviation, x, of the pattern SOURCE: EN 572-5:2012, 3.8; EN 572-6:2012, 3.8 3.11 wire fault (polished wired and wired patterned glass) deviation of the wire, penetration of the glass surface by the wire or break in the wire in the body of the glass SO

45、URCE: EN 572-3:2012, 3.8; EN 572-6:2012, 3.9 3.12 deviation of the wire (polished wired and wired patterned glass) deviation, y, of the wire relative to a reference such as a line or straight edge SOURCE: EN 572-3:2012, 3.9; EN 572-6:2012, 3.10 3.13 edge defect defect which can occur on the edge of

46、a cut size piece in the form of entrant and emergent fault and/or bevel Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 572-8:2012EN 572-8:2012 (E) 8 4 Glass products Glass

47、 products according to the following standards can be offered as supplied sizes or final cut sizes: float glass EN 572-2:2012; polished wired glass EN 572-3:2012; drawn sheet glass EN 572-4:2012; patterned glass EN 572-5:2012; wired patterned glass EN 572-6:2012. 5 Dimensional requirements 5.1 Manuf

48、acturing dimensions 5.1.1 Supplied sizes Supplied sizes cover glass delivered in the sizes given in Table 1. Table 1 Dimensions of supplied sizes Dimensions in millimetres Glass type Nominal dimensions B H Float glass 3 000 2, 2,8, 3, 4, 5, 6 4,0 1,0 1,5 2,0 8, 10, 12 4,0 1,5 2,0 2,5 15 4,0 2,0 2,5 3,0 19, 25 5,0 2,5 3,0 3,5 Copyright European Committee for Standardization Provided by IHS under license with CENNot for Resa