BS EN 2240-077-2011 Aerospace series Lamps incandescent Lamp code 6832 Product standard《航空航天系列 白炽灯 编号为6832的灯具 产品标准》.pdf

《BS EN 2240-077-2011 Aerospace series Lamps incandescent Lamp code 6832 Product standard《航空航天系列 白炽灯 编号为6832的灯具 产品标准》.pdf》由会员分享，可在线阅读，更多相关《BS EN 2240-077-2011 Aerospace series Lamps incandescent Lamp code 6832 Product standard《航空航天系列 白炽灯 编号为6832的灯具 产品标准》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 2240-077:2011Aerospace series Lamps,incandescentPart 077: Lamp, code 6832 ProductstandardBS EN 2240-077:2011 BRITISH STANDARDNational forewordThis British Standard is the U

2、K implementation of EN 2240-077:2011.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not pu

3、rport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 74283 5ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandard

4、s Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationDate Text affectedBS EN 2240-077:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2240-077 July 2011 ICS 49.060 English Version Aerospace series - Lamps, incandescent - Part 077: Lamp, code 6832 - Product st

5、andard Srie arospatiale - Lampes incandescence - Partie 077: Lampe, code 6832 - Norme de produit Luft- und Raumfahrt - Glhlampen - Teil 077: Lampe, Kode 6832 - Produktnorm This European Standard was approved by CEN on 28 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regul

6、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN membe

7、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CE

8、N members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

9、Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nationa

10、l Members. Ref. No. EN 2240-077:2011: EBS EN 2240-077:2011EN 2240-077:2011 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Required characteristics .5 4 Designation 6 5 Marking .6 6 Technical specification .6 BS EN 2240-077:2011EN 2240-077:2011 (E) 3 Foreword This document (EN 22

11、40-077:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Ser

12、vices of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the l

13、atest by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national

14、 standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor

15、way, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2240-077:2011EN 2240-077:2011 (E) 4 1 Scope This European Standard specifies the required characteristics for lamp, code 6832, for aerospace applications. It should be used together with EN 2

16、756. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2240-001, Aerospac

17、e series Lamps, incandescent Part 001: Technical specification EN 2240-002, Aerospace series Lamps, incandescent Part 002: Main characteristics EN 2756, Aerospace series Lamps, incandescent Test methods BS EN 2240-077:2011EN 2240-077:2011 (E) 5 3 Required characteristics 3.1 Dimensions and mass See

18、Figure 1 and Table 1. Dimensions are given in millimetres. Table 1 Key 1 Light centre Figure 1 Bulb appearance Clear Nominal voltage V 5 Nominal current A 0,06 Nominal power W 0,3 Nominal luminous flux lm 0,63 Colour temperature K 1 930 LifeStatic with d.c. h 4 000 Dynamic with d.c. h 3 000 Static w

19、ith a.c. h 4 000 Reduced voltage V Luminous flux at reduced voltage lm Form of filament C 2R Light Centre Length (LCL) 1,25 0,25 Mass (for 1 000) kg 0,06 3.2 Other characteristics See Table 1. 3.3 Form of filament See EN 2240-002. 3.4 Cap Without. BS EN 2240-077:2011EN 2240-077:2011 (E) 6 4 Designat

20、ion EXAMPLE Description block LAMP, INCANDESCENT Identity block EN2240-6832 Number of the basic standard Code (see EN 2240-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking Unless there is not enough space, the lamp and its packagi

21、ng shall be marked with the international code number such as indicated in EN 2240-002. 6 Technical specification See EN 2240-001. This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information an

22、d services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standar

23、ds are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing t

24、his British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatica

25、lly receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publ

26、icationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information

27、on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services

28、. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 F

29、ax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the

30、 international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from B

31、SI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: