ASTM F2243-2005 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft《动力伞降飞行器所要求提供的产品信息的标准规范》.pdf

《ASTM F2243-2005 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft《动力伞降飞行器所要求提供的产品信息的标准规范》.pdf》由会员分享，可在线阅读，更多相关《ASTM F2243-2005 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft《动力伞降飞行器所要求提供的产品信息的标准规范》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F 2243 05Standard Specification forRequired Product Information to be Provided with PoweredParachute Aircraft1This standard is issued under the fixed designation F 2243; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision,

2、the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 The following requirements apply for the manufactureof powered parachute aircraft. This specification inc

3、ludes pilotoperating handbook requirements for powered parachute air-craft that were designed and manufactured in accordance withASTM standards.1.1.1 This specification covers the minimum requirementsfor information that shall be provided by the manufacturer orseller of new light sport aircraft, eng

4、ines, or propellers as a partof the initial sale or transfer to the first end user.1.1.2 This specification does not apply to the sale or transferof used light sport aircraft, engines, or propellers.1.2 This specification applies to powered parachute aircraftseeking civil aviation authority approval

5、, in the form of flightcertificates, flight permits, or other like documentation.1.3 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and de

6、termine the applica-bility of regulatory requirements prior to use.2. Terminology2.1 Definitions:2.1.1 powered parachute, naircraft comprised of a flex-ible or semi-rigid wing connected to a fuselage in such a waythat the wing is not in position for flight until the aircraft is inmotion. This aircra

7、ft has a fuselage with seats, engine, andwheels (or floats), such that the wing and engine cannot beflown without the wheels (or floats) and seat(s). Unique to thepowered parachute is the large displacement between thecenter of lift (high) and the center of gravity (low), which ispendulum effect. Pe

8、ndulum effect limits angle of attackchanges, provides stall resistance and maintains flight stability.3. Significance and Use3.1 The purpose of this specification is to provide theminimum information necessary for the proper identificationand operation of each light sport aircraft.4. Information Req

9、uirements4.1 The information given shall be included where appli-cable on the information plate as specified in 4.2. In addition,the documented operating and maintenance instructions speci-fied in Sections 5 and 6 are to be furnished by the manufactureror seller, at the time of initial sale of each

10、aircraft.4.2 Information PlateA manufacturer-issued fire proofinformation plate, printed in English or as defined by thegoverning civil aviation authority or agency in which theaircraft was initially sold, shall be permanently affixed to theaircraft in a visible location and shall be designed to rem

11、ainlegible for the expected life of the aircraft. The informationplate shall be made of steel, and have the required informationeither stamped or engraved onto the plate.4.2.1 Serial NumberA manufacturer-issued unique iden-tifying number or code affixed to the aircraft.4.2.2 Name and Manufacturer, i

12、ncluding the name of themanufacturers city, state, and country.4.2.3 Model NumberA manufacturer-issued unique iden-tifying number or code assigned to each manufactured type ofaircraft having the same structural design or components.4.2.4 Date of ManufactureThe date (month and year)determined by the

13、manufacturer that the aircraft met hisrequired design and manufacturing specifications.5. Aircraft Operating Instructions5.1 Each light sport aircraft must include an Aircraft Oper-ating Instructions which includes:5.1.1 Operating LimitationsThe instructions shall includelistings of all appropriate

14、air-speed limitations for stall andmaximum speed, maximum wind limitations, weight andbalance, and power plant limitations.1This specification is under the jurisdiction of ASTM Committee F37 on LightSport Aircraft and is the direct responsibility of Subcommittee F37.30 on PowerParachute.Current edit

15、ion approved March 1, 2005. Published March 2005. Originallyapproved in 2003. Last previous edition approved in 2003 as F 2243 03.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.5.1.2 Operating DataThe instructions shall include info

16、r-mation concerning normal and emergency procedures andother pertinent information.5.1.3 FormatThe Aircraft Operating Instructions shallhave the following sections in order of listing5.1.3.1 GeneralIncludes illustration of aircraft, lists theapproved engine(s), propeller(s), fuel, and oil, and any d

17、efini-tions of abbreviations and terminology.5.1.3.2 LimitationsA listing of limits including but notlimited to the airspeed(s), approved maneuvers, and engineoperating limits.5.1.3.3 Emergency ProceduresA listing of emergencyprocedures for items such as engine failure, air restart, fire, etc.5.1.3.

18、4 Normal ProceduresThis section shall cover themanufacturers recommended procedures for normal opera-tions such as preflight inspections, takeoff and landing.5.1.3.5 PerformanceInformation related to the perfor-mance of the aircraft in various environmental and operatingconditions such as fuel range

19、, take off distances and landingdistances. Additional data shall be provided on performance at(at least one) different flight weight and at (at least one)different density altitude.5.1.3.6 Weight and Balance Information related to weightand center of gravity requirements for the safe operation of th

20、eaircraft.5.1.3.7 Description of the Aircraft and its SystemsAgeneral description of the aircraft, controls, instruments, andoptional equipment.5.1.3.8 Handling, Servicing and MaintenanceInformationrelated to the approved maintenance procedures, manuals andapproved sources for information or mainten

21、ance, or both.5.1.3.9 For powered parachute aircraft, the following addi-tional information shall be provided in the Aircraft OperatingInstructions, as required:(1) Aircraft SpeedMaximum and minimum speeds inmiles per hour.(2) Aircraft WeightMaximum and minimum total aircraftflight weights.(3) Envir

22、onmental RestrictionsRecommendations for op-erational restrictions relating to environmental conditions suchas, but not limited to, wind, rain, and extreme heat or cold.5.1.4 SupplementsThis section shall include any addi-tional information that the manufacturer wishes to add.5.1.5 Data Location and

23、 Contact Information, for recoveryof certification documentation, should the original manufac-turer lose its ability to support the make and model.6. Maintenance Manual6.1 Each aircraft shall have a maintenance manual providedfor the aircraft that covers the minimum of the requirements asdefined by

24、the aircraft manufacturer.6.1.1 These shall include, as a minimum, mandatory para-chute assessment by manufacturer accepted personnel at theend of the second year of service and thereafter at the intervalsspecified by the parachute condition as specified by thereviewer and test.6.1.2 These tests sha

25、ll include porosity, strength and defor-mation evaluations.7. Manufacturers Statement of Compliance7.1 Each aircraft, aircraft engine and propeller shall in-cluded a statement identifying the ASTM standards used forthe design, quality control, continued maintenance, and pro-duction acceptance testin

26、g of the product and attesting to thefact that the product is in compliance with the provisions ofthose specifications.8. Operators Responsibility8.1 The following statement shall be included in the pilotoperating handbook and posted in the aircraft passenger area sothat it is visible to both the pi

27、lot and passenger upon entry orwhen seated in the aircraft: “There are inherent risks in theparticipation in recreational aviation aircraft. Operators andpassengers of recreational aviation aircraft, by participation,accept the risks inherent in such participation of which theordinary prudent person

28、 is or should be aware. Pilots andpassengers have a duty to exercise good judgment and act in aresponsible manner while using the aircraft and to obey all oralor written warnings, or both, prior to or during use of theaircraft, or both.”9. Keywords9.1 light sport aircraft; powered parachute aircraft

29、; specialairworthiness certificateASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risko

30、f infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this

31、standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake yo

32、ur views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).F2243052