ASTM F1285-1990(2003) Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques《急救医务人员实施对患者检查的技术培训用标准指南》.pdf

《ASTM F1285-1990(2003) Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques《急救医务人员实施对患者检查的技术培训用标准指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM F1285-1990(2003) Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques《急救医务人员实施对患者检查的技术培训用标准指南》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F 1285 90 (Reapproved 2003)Standard Guide forTraining the Emergency Medical Technician (Basic) toPerform Patient Examination Techniques1This standard is issued under the fixed designation F 1285; the number immediately following the designation indicates the year oforiginal adoption or,

2、 in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide covers the minimum patient examinationtechniques that the emergency

3、medical technician (basic) shallbe trained to use when assessing ill or injured patients of allages.1.2 This guide is one of a series which together describe theminimum training standard for the emergency medical techni-cian (basic).1.3 This standard does not purport to address the safetyconcerns as

4、sociated with its use. It is the responsibility of theuser of this standard to establish appropriate safety and healthpractices and determine the applicability of regulatory limita-tions prior to use.2. Referenced Documents2.1 ASTM Standards:F 1031 Practice for Training the Emergency Medical Tech-ni

5、cian (Basic)23. Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 auscultationexamination by listening with a stetho-scope.3.1.2 inspectionexamination by careful visualization ofthe body or a part of the body.3.1.3 palpationexamination by touching with the hand.4. Significance and

6、Use4.1 This guide establishes the minimum national standardfor training the emergency medical technician (basic) toperform patient examination techniques on patients of all ages.4.2 This guide shall be used by those who wish to identifythe minimum training standard for the emergency medicaltechnicia

7、n (basic) as it relates to the performance of patientexamination techniques.4.3 This guide shall be used as the basis to revise PracticeF 1031.4.4 Every person who is identified as an emergency medicaltechnician (basic) shall have been trained in accordance withthis guide.4.5 This guide does not sta

8、nd alone and must be used inconjunction with the applicable documents cited in Section 2.5. Examination Techniques5.1 The emergency medical technician (basic) shall betrained to perform the following examination techniques and torecognize the differences that exist because of age and sex:5.1.1 Asses

9、s respirations for rate, rhythm, and quality,5.1.2 Auscultate for breath sounds,5.1.3 Assess rate and regularity of the following pulses:carotid, brachial, radial, femoral, and pedal,5.1.4 Palpate blood pressure,5.1.5 Auscultate blood pressure,5.1.6 Assess mental status and level of consciousness,5.

10、1.7 Inspect the body,5.1.8 Palpate the body,5.1.9 Assess sensory perception,5.1.10 Assess motor function, and5.1.11 Assess airway patency.1This guide is under the jurisdiction of ASTM Committee F30 on EmergencyMedical Services and is the direct responsibility of Subcommittee F30.02 onPersonnel, Trai

11、ning and Education.Current edition approved Sept. 10, 2003. Published October 2003. Originallyapproved in 1990. Last previous edition approved in 1998 as F 1285 90 (1998).2Annual Book of ASTM Standards, Vol 13.02.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, P

12、A 19428-2959, United States.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infr

13、ingement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standa

14、rd or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your vie

15、ws known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).F 1285 90 (2003)2