ASTM E2324-2004(2017) Standard Guide for PDD Paired Testing《PDD配对试验的标准指南》.pdf

《ASTM E2324-2004(2017) Standard Guide for PDD Paired Testing《PDD配对试验的标准指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM E2324-2004(2017) Standard Guide for PDD Paired Testing《PDD配对试验的标准指南》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2324 04 (Reapproved 2017)Standard Guide forPDD Paired Testing1This standard is issued under the fixed designation E2324; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parenthes

2、es indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This is a guide for the derivation of quantitative assess-ments of the credibility of proposed witness testimony throughthe application of established sta

3、tistical principles to combina-tions of PDD examination results, and for the utilization ofsuch assessments in the interests of justice (The Marin Proto-col).1.2 This guide describes circumstances in which provenstatistical principles, applied to PDD results, can reliablyquantify the trustworthiness

4、 or untrustworthiness of witnesstestimony, and1.2.1 Delineates requirements necessary to effect the gen-eration and practical use of such results, including:1.2.1.1 Criteria regarding witnesses to be examined,1.2.1.2 Criteria for determining facts upon which witnessesare to be examined,1.2.1.3 Certi

5、fication of examiners eligible to conductexaminations,1.2.1.4 Combinations of results which support stronginferences, and1.2.1.5 Appropriate uses to which strong inferences can beput.1.3 Courts and others responsible for adjudicating questionsof fact may choose whether and when to invoke paired PDDt

6、esting.1.3.1 This guide expresses the rights and obligations of allparticipants in order to best serve the interests of justice whenit is invoked.1.3.2 Paired PDD testing must not be invoked in any case inany jurisdiction where to do so would violate the laws of thatjurisdiction.1.3.3 Adherence to t

7、hese guidelines ensures that the conclu-sions reached will be valid.1.4 This guide is directed to the proposed testimony ofwitnesses in criminal, civil, administrative and family courtlitigation, regarding factual claims, where1.4.1 It is unlikely that the witnesses could be honestlymistaken, and1.4

8、.2 The facts in dispute are such that the case may hingeon whom the trier of fact believes; whenever,1.4.3 Witnesses on opposite sides of a case offer contradic-tory testimony.1.4.4 Two or more witnesses testifying for one side offermutually corroborating testimony.1.5 This international standard wa

9、s developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.2. Referenc

10、ed Documents2.1 ASTM Standards:2E2031 Practice for Quality Control of PsychophysiologicalDetection of Deception (Polygraph) Examinations3. Significance and Use3.1 The goal of this guide is to reduce the incidence andimpact of perjured testimony in administrative proceedings andin the criminal, civil

11、 and family court systems.3.2 It is a mathematically established statistical principlethat the probability of two independent events both occurring isthe algebraic product of the probabilities of either eventoccurring alone.33.3 In litigation, the situation frequently arises:3.3.1 That witnesses fro

12、m opposite sides offer diametricallycontradictory testimony regarding a fact or facts, such that onemust almost certainly be lying, and3.3.2 That witnesses from one side corroborate each otherstestimony, such that either both must be telling the truth, orboth must be lying.3.4 Where both witnesses a

13、re examined regarding a fact:1This guide is under the jurisdiction of ASTM Committee E52 on ForensicPsychophysiology and is the direct responsibility of Subcommittee E52.05 onPsychophysiological Detection of Deception (PDD).Current edition approved Oct. 1, 2017. Published October 2017. Originallyapp

14、roved in 2004. Last previous edition approved in 2011 as E2324 04 (2011).DOI: 10.1520/E2324-04R17.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Docu

15、ment Summary page onthe ASTM website.3Press, S.J., Bayesian Statistics: Principles, Models, and Applications, JohnWiley including as necessary,(3) The validity of Litigation Certificates, or(4) The validity of the mathematical reasoning, or both.6.2 Nothing about the polygraph may be introduced byei

16、ther side in regard to testimony about facts where examina-tions have produced any other combination of results or aboutwhich neither party has requested testing.6.2.1 Unedited beginning to end videotapes of the exami-nations together with the charts and reports of the examinersE2324 04 (2017)3and t

17、he reports of reviewers shall be made available to thejudge or presiding official.6.3 If neither party requests testing of witnesses regarding afact, or the examinations produce any other combination ofresults about a fact, then no testimony about the polygraphexaminations shall be admissible regard

18、ing that fact.7. Applications7.1 Courts or presiding officials may initiate or utilizeexaminations conducted in accordance with this protocol:7.1.1 In challenges to testimony supporting search andarrest warrants;7.1.2 To assess the trustworthiness of witnesses offeringalibi or other exculpatory test

19、imony;7.1.3 To assess the weight to be given to the word ofinformants whose trustworthiness is uncertain or those whomay have conflicting interests;7.1.4 To ascertain the good faith of litigants as a guide to theconduct of the case, including adjudication of motions and thenegotiation of settlements

20、; and7.1.5 In requests for post-conviction relief, to assess theweight to be given to witness recantations and exculpatoryconfessions.8. Certification8.1 The statistical basis for the validity for this protocoldepends upon the proven ability of each participating examinerto perform at a known level

21、of accuracy. Consequently, onlyexaminers who have personally demonstrated their level ofaccuracy shall be eligible to conduct examinations or conductQuality Assurance reviews pursuant to it.8.1.1 Examinations shall be conducted by persons holding aContested Testimony Resolution Certificate, or its e

22、quivalent,from a competent certifying authority, based upon their havingdemonstrated their personal accuracy, and on their having metcertain other criteria.8.2 Examiners shall be eligible for certification uponcompletion of a supervised examination regimen conductedunder the auspices of the courts o

23、r other entity of federal orstate government, or an institution or organization designatedas a Contested Testimony Resolution Certificate IssuanceAuthority or its equivalent by the American PolygraphAssociation, or the American Association of PolicePolygraphists, or the American Bar Association,.8.2

24、.1 The examiner:8.2.1.1 Has not been convicted of a felony or misdemeanorinvolving moral turpitude;8.2.1.2 Has attained the age of 21 years; and8.2.1.3 Has demonstrated competence in an establishedprocedure or procedures by conducting complete examinationsof subjects including pretest interview, que

25、stion formulation,question presentation and the interpretable charts and datacollection.8.2.2 The examiners competence in the correct administra-tion of the procedure is affirmed by a panel of examiners afterwatching videotapes of the examiner conducting examinations.8.2.3 The examiner shall analyze

26、 charts from an archive ofat least 100 examinations where ground truth is known,obtaining:8.2.3.1 Conclusive results for at least 80 % of the subjects,and8.2.3.2 Correct results for 86 % of the conclusive resultsreported.8.3 Certification of any examiner shall be limited to theprocedure(s) used in o

27、btaining the certificate.8.4 A roster of certified examiners shall be made availableto the courts.8.4.1 Examiners may elect not to have their names placedon the roster. Examiners shall have a reasonable time after theyare informed of their results in which to make such election.9. Responsibilities o

28、f the Court9.1 The courts of each jurisdiction should select examinersfrom the roster of Contested Testimony Resolution Certificateholders.9.2 The court should require examination results to beaccompanied by an unedited beginning-to-end videotape of theexamination.9.2.1 The videotapes, together with

29、 the charts and reports ofthe examiners and the reports of reviewers should be made partof the record or appellate and other purposes.10. Keywords10.1 Contested Testimony Resolution certificate; evidence;false statements; forensic psychophysiology; litigation; MarinProtocol; perjured testimony; perj

30、ury; polygraph; testimony;trustworthy testimony; untrustworthy testimonyASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of

31、 any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments ar

32、e invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not rec

33、eived a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies)

34、of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 04 (2017)4