ASTM E2136-2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability《独院附联式和独建式住宅耐久性规定和性能评定标准指南》.pdf
《ASTM E2136-2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability《独院附联式和独建式住宅耐久性规定和性能评定标准指南》.pdf》由会员分享,可在线阅读,更多相关《ASTM E2136-2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability《独院附联式和独建式住宅耐久性规定和性能评定标准指南》.pdf(48页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: E 2136 04An American National StandardStandard Guide forSpecifying and Evaluating Performance of Single FamilyAttached and Detached DwellingsDurability1This standard is issued under the fixed designation E 2136; the number immediately following the designation indicates the year oforigi
2、nal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.INTRODUCTIONThis standard guide is part of a set which together presents a
3、complete performance standard guidefor specifying and evaluating single family attached and detached dwellings. The complete set in theseries, when finished, is to include the attributes given in Fig. 1.The series provides a framework for specifying and evaluating qualities of building products ands
4、ystems to meet user needs without limiting ways and means. The format for this standard guideincludes performance statements that consist of four components, Objectives-Criteria-Evaluation-Commentary (O-C-E-C), which together provide a systematic performance based approach for theintended purpose. T
5、hese performance statements are presented in Section 8 against a Hierarchy ofBuilding Elements as tabulated in Fig. 2.The purpose of these standard guides is to provide a standardized methodology for describingperformance parameters of single-family attached or detached dwellings. This methodology s
6、tandard-izes the descriptions of performance of a single-family dwelling, attached or detached, that can beexpressed as performance statements (O-C-E-C) for a particular attribute, degradation factor, and userneed.These standard guides are intended for use by those who need to prescribe required lev
7、els ofperformance and those who need to rate a product which forms a single-family dwelling or partthereof. The standard guides include examples of performance statements that may be used for thespecification and evaluation of design, materials, products, components, subsystems, and systems.1. Scope
8、1.1 This guide gives examples of performance statementsfor durable in-place materials, products, components, sub-systems, and systems for single family attached and detacheddwellings, considering the effects of normal degradation fac-tors to which they are anticipated to be subjected over theirservi
9、ce lives. Table 1 provides a listing of the sections of thisGuide that address durability including the performance state-ments.1.2 Damage from extreme acts of nature, vandalism, orintentional destructive acts by dwelling inhabitants are notconsidered as normal degradation factors affecting durabili
10、ty inthis guide.NOTE 1Performance statements regarding the performance of singlefamily attached and detached dwellings under extreme acts of nature areaddressed in the Guide on Structural Safety and Serviceability.1.3 This document also addresses site planning in so far asit affects the durability o
11、f single family attached and detacheddwellings.1.4 The values stated in SI units are to be regarded as thestandard. The values in parentheses are for information.1.5 This guide is not intended to be used as a prescriptiveregulatory document.2. Referenced Documents2.1 ASTM Standards:2B 117 Practice f
12、or Operating Salt Spray (Fog) ApparatusC 1036 Specification for Flat GlassC 1048 Specification for Heat-Treated Flat Glass-Kind HS,Kind FT Coated, and Uncoated GlassC 1172 Specification for LaminatedArchitectural Flat GlassC 1349 Specification forArchitectural Flat Glass Clad Poly-carbonate1This gui
13、de is under the jurisdiction of ASTM Committee E06 on Performanceof Buildings and is the direct responsibility of Subcommittee E06.25 on WholeBuildings and Facilities.Current edition approved Oct 1, 2004. Published October 2004. Originallyapproved in 2001. Last previous edition approved in 2001 as E
14、 2136 01.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive
15、, PO Box C700, West Conshohocken, PA 19428-2959, United States.D 225 Specification for Asphalt Shingles (Organic Felt)Surfaced With Mineral GranulesD 256 Test Methods for Determining the Izod PendulumImpact Resistance of PlasticsD 1729 Practice for Visual Evaluation of Colors and ColorDifferences of
16、 Diffusely-Illuminated Opaque MaterialsD 2444 Test Method for Determination of the Impact Re-sistance of Thermoplastic Pipe and Fitting by Means of aTup (Falling Weight)D 2486 Test Methods for Scrub Resistance of Wall PaintsD 3363 Test Method for Film Hardness by Pencil TestD 3462 Specification forA
17、sphalt Shingles Made from GlassFelt and Surfaced with Mineral GranulesD 3746 Test Method for Impact Resistance of BituminousRoofing SystemsD 4226 Test Methods for Impact Resistance of Rigid Poly-(Vinyl Chloride) (PVC) Building ProductsD 4449 Test Method for Visual Evaluation of Gloss Differ-ences Be
18、tween Surfaces of Similar AppearanceD 4812 Test Method for Unnotched Cantilever Beam Im-pact Strength of PlasticsD 5178 Test Method for Mar Resistance of Organic Coat-ingsD 5420 Test Method for Impact Resistance of Flat, RigidPlastic Specimen by Means of a Striker Impacted by aFalling Weight (Gardne
19、r Impact)D6110 Test Methods for Determining the Charpy ImpactResistance of Notched Specimens of PlasticsE 631 Terminology of Building ConstructionsE 632 Practice for Developing Accelerated Tests to AidPrediction of the Service Life of Building Components andMaterialsE 695 Test Method for Measuring R
20、elative Resistance ofWall, Floor, and Roof Construction to Impact LoadingE 773 Test Method Accelerated Weathering of Sealed Insu-lating Glass UnitsE 774 Specification for the Classification of the Durabilityof Sealed Insulating Glass UnitsE 822 Practice for Determining Resistance of Solar Collec-tor
21、 Covers to Hail by Impact With Propelled Ice BallsE 917 Practice for Measuring Life-Cycle Costs of Buildingsand Building SystemsE 997 Test Method for Structural Performance of Glass inWindows, Curtain Walls, and Doors Under the Influence ofUniform Static Loads by Destructive MethodE 998 Test Method
22、for Structural Performance of Glass inWindows, Curtain Walls, and Doors Under the Influence ofUniform Static Loads by Non-destructive MethodE 1017 Specification for Generic Requirements for ExteriorResidential Window Assemblies3E 1233 Test Method for Structural Performance of ExteriorWindows, Curtai
23、n Walls, and Doors by Cyclic Static AirPressure DifferentialE 1825 Guide for Evaluation of Exterior Building WallMaterials, Products, and SystemsE 2025 Test Method for Evaluating Fenestration Compo-nents and Assemblies for Resistance to Impact EnergiesE 2151 Terminology of Guides for Specifying and
24、Evaluat-ing Performance of Single Family and Detatched Dwell-ingsF 925 Test Method for Resistance to Chemicals of ResilientFlooringF 1265 Test Method for Resistance to Impact for ResilientFloor TileG 116 Practice for Conducting Wire-on Bolt Test for Atmo-spheric Galvanic CorrosionG 149 Practice for
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTME21362004STANDARDGUIDEFORSPECIFYINGANDEVALUATINGPERFORMANCEOFSINGLEFAMILYATTACHEDANDDETACHEDDWELLINGSDURABILITY

链接地址:http://www.mydoc123.com/p-530377.html