ASTM E2057-2010(2015) Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations《编制性侵犯调查中实验室研究请求的标准规范》.pdf

《ASTM E2057-2010(2015) Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations《编制性侵犯调查中实验室研究请求的标准规范》.pdf》由会员分享，可在线阅读，更多相关《ASTM E2057-2010(2015) Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations《编制性侵犯调查中实验室研究请求的标准规范》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2057 10 (Reapproved 2015)Standard Specifications forPreparation of Laboratory Analysis Requests in SexualAssault Investigations1This standard is issued under the fixed designation E2057; the number immediately following the designation indicates the year oforiginal adoption or, in the

2、case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe meaningful analysis of physical evidence recovered in sexual assault investigations

3、requires notonly careful attention to the preservation of easily damaged or degraded biological materials but alsothe transmittal of a clear description and explanation of that evidence for the examining scientists/analysts/criminalists. This description should include the source of, and relationshi

4、ps between,different evidence items and is sometimes referred to as a “case synopsis.” The more information theanalysts have at their disposal concerning the circumstances of the assault and the relationship(s) ofthe victim(s) and suspect(s), the more successful their efforts will be in resolving qu

5、estions in theinvestigation. Failure to adequately document and report this information in the request for scientificanalysis could lead to the application of useless tests of the evidence that may destroy materials betterused in other more meaningful examinations.1. Scope1.1 These specifications de

6、scribe the basic elements of arequest for the scientific examination of physical evidencecollected in the investigation of a sexual assault. Thesespecifications are designed to be used in conjunction with otherspecifications, guides, and practices associated with sexualassault examinations that are

7、listed in Section 2.1.2 These specifications outline considerations that willfacilitate the analysis of sexual assault evidence by a poten-tially large group of forensic experts. These experts caninclude, but are not limited to, serologists, toxicologists,pathologists, odontologists, latent print ex

8、aminers, firearm andtoolmark examiners, and trace materials analysts. The successof their combined work generally requires a clear understand-ing of the issues and relationships involved in the case.2. Referenced Documents2.1 ASTM Standards:2E1843 Guide for Sexual Assault Investigation, Examination,

9、and Evidence Collection3. Terminology3.1 DefinitionsFor definitions of terms used in thesespecifications, see the Compilation of ASTM Standard Defini-tions (1990).4. Summary of Practice4.1 Requests for laboratory analysis should be supported bysufficient documentation to allow the laboratory scienti

10、st(s) tounderstand the conditions surrounding the assault and therelationship(s) between different items of evidence.4.2 These specifications are to be used in conjunction withGuide E1843.5. Significance and Use5.1 These specifications are designed to ensure that evi-dence associated with a sexual a

11、ssault investigation is handledand analyzed in the most useful manner and without wastingevidentiary materials and analytical time or resources, or both.6. Procedure6.1 The request for scientific examination of sexual assaultevidence should include a completed medical examiner orSANE evaluation form

12、, in accordance with Guide E1843.Itshould also include a complete investigative review as de-scribed as follows. All of the information described may not beavailable in a specific case or at the time of an initial request foranalysis, but it should be forwarded to the examining forensiclaboratory in

13、 writing as soon as the information is developed.1These specifications are under the jurisdiction of ASTM Committee E30 onForensic Sciences and are the direct responsibility of Subcommittee E30.01 onCriminalistics.Current edition approved Jan. 1, 2015. Published January 2015. Originallyapproved in 2

14、000. Last previous edition approved in 2010 as E2057 10.DOI:10.1520/E2057-10R15.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page

15、onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States16.2 The analytical request and investigative review shouldinclude the following information to the extent that it isavailable in a specific case:(1) Age/sex/race of th

16、e assailant(s), if known.(2) Description of the clothing worn by the assailant(s), ifknown.(3) Age/sex/race of the victim.(4) Date of victims last consensual coitus/activity.(5) Date of victims last menstrual period, if applicable.(6) Notation as to whether the assailant(s) used a condomor lubricant

17、, if known.(7) Release/disclosure of evidence and information by thevictim to law enforcement.6.2.1 Time line, beginning with the victims initial contactwith the assailant(s) and concluding with the victims clinicalor post mortem examination and collection of physical evi-dence from the victim or su

18、spect(s), or both.6.2.2 Relationship of the victim and suspect(s).6.2.3 Description of any legitimate contact between thevictim and suspect(s).6.2.4 Synopsis of the victims consensual sexual activity inat least the 72 h prior to the assault.6.2.5 Location(s) of assault and description(s) of the envi

19、-ronment of each location.6.2.6 Description of all individuals with legitimate access tothe assault scene(s) and their relationships.6.2.7 Detailed description of the assault.6.2.8 Description of any facilities, residential locations, ortransportation venues used by the victim and the suspect(s)betw

20、een the time of the assault and the initial assault exami-nation and collection of physical evidence.6.2.9 Description of all the individuals with day-to-dayaccess to the locations listed in 6.2.6 and these individualsrelationships.6.2.10 Listing of any weapons associated with the assaultand the ori

21、gin of these weapons, whether victim, assailant, orthird-party property.6.2.11 Listing of any individual(s) with legitimate access toeach weapon.6.2.12 Itemized list of the searches, evidence collected,analyses, and comparisons needed from the forensic laboratory.This list should be keyed to the for

22、egoing items in Section 6.6.2.13 A list of telephone, facsimile, and e-mail numbersand addresses, where the forensic examiners may have timelyaccess to the investigator(s) and attorney(s) handling the case.7. Keywords7.1 investigation; investigative report; request for scientificanalysis; sexual ass

23、aultASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights,

24、 are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional sta

25、ndardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Com

26、mittee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddr

27、ess or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 10 (2015)2