ASTM E2057-2010 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations《性侵犯调查中的实验室分析要求的准备工作的标准规范》.pdf

《ASTM E2057-2010 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations《性侵犯调查中的实验室分析要求的准备工作的标准规范》.pdf》由会员分享，可在线阅读，更多相关《ASTM E2057-2010 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations《性侵犯调查中的实验室分析要求的准备工作的标准规范》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2057 10Standard Specifications forPreparation of Laboratory Analysis Requests in SexualAssault Investigations1This standard is issued under the fixed designation E2057; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision,

2、the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe meaningful analysis of physical evidence recovered in sexual assault investigations requires notonly c

3、areful attention to the preservation of easily damaged or degraded biological materials but alsothe transmittal of a clear description and explanation of that evidence for the examining scientists/analysts/criminalists. This description should include the source of, and relationships between,differe

4、nt evidence items and is sometimes referred to as a “case synopsis.” The more information theanalysts have at their disposal concerning the circumstances of the assault and the relationship(s) ofthe victim(s) and suspect(s), the more successful their efforts will be in resolving questions in theinve

5、stigation. Failure to adequately document and report this information in the request for scientificanalysis could lead to the application of useless tests of the evidence that may destroy materials betterused in other more meaningful examinations.1. Scope1.1 These specifications describe the basic e

6、lements of arequest for the scientific examination of physical evidencecollected in the investigation of a sexual assault. Thesespecifications are designed to be used in conjunction with otherspecifications, guides, and practices associated with sexualassault examinations that are listed in Section

7、2.1.2 These specifications outline considerations that willfacilitate the analysis of sexual assault evidence by a poten-tially large group of forensic experts. These experts caninclude, but are not limited to, serologists, toxicologists,pathologists, odontologists, latent print examiners, firearm a

8、ndtoolmark examiners, and trace materials analysts. The successof their combined work generally requires a clear understand-ing of the issues and relationships involved in the case.2. Referenced Documents2.1 ASTM Standards:2E1843 Guide for Sexual Assault Investigation, Examina-tion, and Evidence Col

9、lection3. Terminology3.1 DefinitionsFor definitions of terms used in thesespecifications, see the Compilation of ASTM Standard Defini-tions (1990).4. Summary of Practice4.1 Requests for laboratory analysis should be supported bysufficient documentation to allow the laboratory scientist(s) toundersta

10、nd the conditions surrounding the assault and therelationship(s) between different items of evidence.4.2 These specifications are to be used in conjunction withGuide E1843.1These specifications are under the jurisdiction of ASTM Committee E30 onForensic Sciences and are the direct responsibility of

11、Subcommittee E30.01 onCriminalistics.Current edition approved April 1, 2010. Published August 2010. Originallyapproved in 2000. Last previous edition approved in 2000 as E2057 00, which waswithdrawn January 2002 and reinstated in July 2010. DOI:10.1520/E2057-10.2For referenced ASTM standards, visit

12、the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959

13、, United States.5. Significance and Use5.1 These specifications are designed to ensure that evi-dence associated with a sexual assault investigation is handledand analyzed in the most useful manner and without wastingevidentiary materials and analytical time or resources, or both.6. Procedure6.1 The

14、 request for scientific examination of sexual assaultevidence should include a completed medical examiner orSANE evaluation form, in accordance with Guide E1843.Itshould also include a complete investigative review as de-scribed as follows. All of the information described may not beavailable in a s

15、pecific case or at the time of an initial request foranalysis, but it should be forwarded to the examining forensiclaboratory in writing as soon as the information is developed.6.2 The analytical request and investigative review shouldinclude the following information to the extent that it isavailab

16、le in a specific case:Age/sex/race of the assailant(s), if known.Description of the clothing worn by the assailant(s), ifknown.Age/sex/race of the victim.Date of victims last consensual coitus/activity.Date of victims last menstrual period, if applicable.Notation as to whether the assailant(s) used

17、a condom orlubricant, if known.Release/disclosure of evidence and information by thevictim to law enforcement.6.2.1 Time line, beginning with the victims initial contactwith the assailant(s) and concluding with the victims clinicalor post mortem examination and collection of physical evi-dence from

18、the victim or suspect(s), or both.6.2.2 Relationship of the victim and suspect(s).6.2.3 Description of any legitimate contact between thevictim and suspect(s).6.2.4 Synopsis of the victims consensual sexual activity inat least the 72 h prior to the assault.6.2.5 Location(s) of assault and descriptio

19、n(s) of the envi-ronment of each location.6.2.6 Description of all individuals with legitimate access tothe assault scene(s) and their relationships.6.2.7 Detailed description of the assault.6.2.8 Description of any facilities, residential locations, ortransportation venues used by the victim and th

20、e suspect(s)between the time of the assault and the initial assault exami-nation and collection of physical evidence.6.2.9 Description of all the individuals with day-to-dayaccess to the locations listed in 6.2.6 and these individualsrelationships.6.2.10 Listing of any weapons associated with the as

21、saultand the origin of these weapons, whether victim, assailant, orthird-party property.6.2.11 Listing of any individual(s) with legitimate access toeach weapon.6.2.12 Itemized list of the searches, evidence collected,analyses, and comparisons needed from the forensic laboratory.This list should be

22、keyed to the foregoing items in Section 6.6.2.13 A list of telephone, facsimile, and e-mail numbersand addresses, where the forensic examiners may have timelyaccess to the investigator(s) and attorney(s) handling the case.7. Keywords7.1 investigation; investigative report; request for scientificanal

23、ysis; sexual assaultASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement

24、 of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or fo

25、r additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known

26、 to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).E2057 102