ASTM D4339-2001(2013) Standard Test Method for Determination of the Odor of Adhesives《测定胶粘剂气味的标准试验方法》.pdf

《ASTM D4339-2001(2013) Standard Test Method for Determination of the Odor of Adhesives《测定胶粘剂气味的标准试验方法》.pdf》由会员分享，可在线阅读，更多相关《ASTM D4339-2001(2013) Standard Test Method for Determination of the Odor of Adhesives《测定胶粘剂气味的标准试验方法》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D4339 01 (Reapproved 2013)Standard Test Method forDetermination of the Odor of Adhesives1This standard is issued under the fixed designation D4339; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revis

2、ion. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope1.1 This test method describes a procedure for eval

3、uatingthe odor of adhesives. It is intended to replace FederalStandard 175A, Method 4051.1.2 This test method provides a means of comparing theodor of an adhesive sample to a reference sample. It is notintended to give an absolute value for the odor of a sample. Itcan be used for wet or dry samples.

4、1.3 WarningDo not use this test method with adhesivescontaining hazardous components such as solvent residues andunreacted monomeric materials.1.4 The values stated in inch-pound units are to be regardedas the standard. The values given in parentheses are forinformation only.1.5 This standard does n

5、ot purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use. See 1.3 for specificprecautionary stat

6、ements.2. Referenced Documents2.1 ASTM Standards:2D907 Terminology of AdhesivesD1391 Method for Measurement of Odor in Atmospheres(Dilution Method) (Withdrawn 1986)33. Terminology3.1 DefinitionsSeveral terms in this test method are de-fined in accordance with Terminology D907.3.2 Definitions of Term

7、s Specific to This Standard:3.2.1 odor, nthat property of a substance which affects thesense of smell.4. Significance and Use4.1 The results from this determination are useful in deter-mining the suitability of adhesives in applications where theodor level associated with the end use is critical.5.

8、Apparatus5.1 Glass Bottles, 1-qt (1-L), wide-mouth, straight sided,with screw caps.NOTE 1It is important that the bottles and caps be kept clean andodor-free. Discard any bottle which cannot be made visibly clean orodor-free. Wash bottles and caps with a suitable cleaning powder, rinsethoroughly wit

9、h tap water, then rinse with distilled water, drain, and dryin an oven. Do all cleaning in an odor-free atmosphere.5.2 Oven or Incubator, for aging samples at elevated tem-peratures.5.3 Aluminum Foil.5.4 Balance, capable of measuring to nearest 0.1 g.6. Test Sample and Test Specimen6.1 Select a test

10、 sample representative of the adhesive beingtested. It may be liquid or solid. Keep in a tightly closedcontainer until used (5.1).6.2 For the test specimen, place 20.0 6 0.1 g of the testsample into the glass bottle (5.1), cover with aluminum foil,place the cap on the bottle and tighten.NOTE 2Always

11、 use new aluminum foil, never reuse it.7. Reference Sample and Reference Specimen7.1 Select a reference sample, that from prior experience orknowledge, or by agreement between supplier and purchaser ofadhesive, has acceptable odor.7.1.1 Store the reference sample in a tightly closedcontainer, specif

12、ied in 5.1, in a reasonably odor-free atmo-sphere.7.1.2 Take care against contamination of the referencesample. If it is suspected that the reference sample has beencontaminated, discard it and obtain a new reference sample.1This test method is under the jurisdiction of ASTM Committee D14 onAdhesive

13、s and is the direct responsibility of Subcommittee D14.10 on WorkingProperties.Current edition approved Oct. 1, 2013. Published October 2013. Originallyapproved in 1984. Last previous edition approved in 2007 as D4339 01 (2007).DOI: 10.1520/D4339-01R13.2For referenced ASTM standards, visit the ASTM

14、website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM Internati

15、onal, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States17.2 For the reference specimen, transfer 20.0 6 0.1 g of thereference sample into the glass bottle (5.1), cover with alumi-num foil, place the cap on the bottle, and tighten.8. Conditioning8.1 Age the bottles c

16、ontaining the reference and test adhe-sive specimens for at least 24 h at ambient temperature andhumidity prior to testing.8.2 If the effect of elevated temperature aging on the odor ofthe adhesive is desired, place the capped bottles containing theadhesive specimens in an oven at the desired agingt

17、emperature, and condition for 2 h. Allow the test specimens tocool to ambient temperature before evaluating odor.NOTE 3Bottles aged at elevated temperatures must be shielded withina suitable metal container to protect against bottle rupturing.NOTE 4Longer conditioning times may be used, if desired.8

18、.2.1 Evaluate test specimens aged at elevated temperatureswithin a 2-h period after test specimens have returned toambient temperature.9. Selection of Odor Panel9.1 Use the following criteria for selection of the membersof the odor panel:9.1.1 The panel is to consist of at least three people.9.1.2 P

19、referably, panel members are to be nonsmokers.9.1.3 Panel members are not allowed to smoke, eat, or drink(other than water) for approximately 1 h prior to evaluatingsamples.9.1.4 No person with a cold or nasal congestion, or who hasbeen working with chemicals with strong odors, is allowed tobe a pan

20、el member.9.1.5 Panel members are to be free of odors from scentedcosmetics.10. Procedure10.1 Pair each adhesive test specimen to be tested with areference specimen that has undergone identical conditioning.10.2 Remove the cap and foil and immediately sniff theodor. Keep the bottle closed except for

21、 the short periodnecessary to sniff the specimen. (WarningSee 1.3.)10.3 Indicate for each pair of samples whether the odor ofthe adhesive specimen is less than, equal to, or greater than thereference specimen.10.4 Observe the following conditions when conducting thetests:10.4.1 All panel members are

22、 to conduct testing on the sameday and within a period of 4 h. See 8.2 for instructions forhandling specimens conditioned at elevated temperatures.10.4.2 Each panel member is to perform the odor testing ina room free of odors and evaluate all specimens in the sameroom at the same time. All panel mem

23、bers are to use the sameroom.NOTE 5Odor fatigue can occur if many samples are evaluated at onetime or if many rechecks are required to reach a decision on the samesample. If this occurs, allow at least 5 min for the nose to regain its formersensitivity. Panel members may find that the sense of smell

24、 is sharpenedif specimens are rated with the eyes closed.11. Interpretation of Results11.1 Compile the odor testing results from the panel mem-bers. Report the odor level receiving the majority of the votesas the odor level for the test sample.11.2 If no odor level receives a majority, then rate the

25、 testsample as having odor equal to the reference sample.12. Report12.1 Include in the report the following:12.1.1 Test sample identification,12.1.2 Reference sample identification,12.1.3 Conditioning procedure for test and referencespecimens,12.1.4 Odor of test specimen as less than, equal to, orgr

26、eater than the odor of the reference specimen, and12.1.5 Date of evaluation.13. Precision and Bias13.1 No information is presented about either the precisionor bias of Test Method D4339 for measuring odor since the testresult is nonquantitative.NOTE 6For a more complete treatment of odor testing by

27、sensoryperception, see Method D1391.14. Keywords14.1 odorASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such paten

28、t rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited eithe

29、r for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair he

30、aring you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standar

31、d may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).D4339 01 (2013)2