ASTM D4311 D4311M-2009 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature《基准温度下沥青体积校正的标准试验方法》.pdf

《ASTM D4311 D4311M-2009 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature《基准温度下沥青体积校正的标准试验方法》.pdf》由会员分享，可在线阅读，更多相关《ASTM D4311 D4311M-2009 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature《基准温度下沥青体积校正的标准试验方法》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D4311/D4311M 09Standard Practice forDetermining Asphalt Volume Correction to a BaseTemperature1This standard is issued under the fixed designation D4311/D4311M; the number immediately following the designation indicates theyear of original adoption or, in the case of revision, the year

2、of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice provides tables of volume correctionfactors which may be used to convert volumes of asphaltmeasured a

3、t different temperatures to a volume at a standardbase temperature. These tables are applicable to all types ofasphalts except emulsified asphalts.1.2 This practice provides tables to convert asphalt volumesto 15C 60F from volumes measured at any temperaturefrom 25 to +275C 0 to 500F.1.3 The values

4、stated in either SI units or inch-pound unitsare to be regarded separately as standard. The values stated ineach system may not be exact equivalents; therefore, eachsystem shall be used independently of the other. Combiningvalues from the two systems may result in non-conformancewith the standard.NO

5、TE 1Correction factors in Table 1 and Table 2 are for use in placeof correction factors provided in Guide D1250, which do not addressrequirements for asphalt specifications.22. Referenced Documents2.1 ASTM Standards:3D70 Test Method for Density of Semi-Solid BituminousMaterials (Pycnometer Method)D1

6、250 Guide for Use of the Petroleum Measurement TablesD3142 Test Method for Specific Gravity, API Gravity, orDensity of Cutback Asphalts by Hydrometer MethodD3289 Test Method for Density of Semi-Solid and SolidBituminous Materials (Nickel Crucible Method)3. Significance and Use3.1 Asphalts change in

7、volume with change in temperature.They are loaded or transferred at widely varying temperatures.Volume correction factors are used to adjust bulk volumesmeasured at those temperatures to corresponding volumes at abase temperature of 15C or 60F for the purposes of custodytransfer and accounting opera

8、tions.3.2 Correction factors as provided in this practice haveproven to be sufficiently accurate for the intended purposes.3.3 Coefficients of expansion used for development of datain this practice are as follows:Table Column A Column B1 0.00035 0.000402 0.00063 0.000724. Procedure4.1 Volume correct

9、ion factors are provided for volumeadjustments to 15C in Table 1 and 60F in Table 2. Thetables are entered with asphalt temperature at which bulkvolume is measured.4.2 The tables provide two sets of factors in columnslabeled A and B. The selection of the appropriate column, A orB, is defined by tabl

10、e footnotes. The selection is based onasphalt density at 15C, API gravity at 60F, or by thespecific gravity 60/60F. Column A factors apply to themajority of asphalts.4.2.1 Values for density at 15C, API gravity at 60F, andspecific gravity 60/60F may be obtained by Test MethodD70, Test Method D3289,

11、or Test Method D3142.4.2.2 Volume correction factors (see Note 2) for Table 1were generated using the following formulas:4.2.2.1 Table 1A Factor Asphalts:A 5 1.009 2 6.3341 3 1024TC!# 1 1.4571 3 1027TC!#2(1)where:A = volume correction factor, andT (C) = temperature of asphalt in C.4.2.2.2 Table 1B F

12、actor Asphalts:B 5 1.0108 2 7.2344 3 1024TC!# 1 2.199 3 1027TC!#2(2)where:B = volume correction factor, andT (C) = temperature of asphalt in C.4.2.2.3 These formulas may be used in lieu of Table 1 tocalculate volume correction factors.1This practice is under the jurisdiction of ASTM Committee D04 on

13、 Road andPaving Materials and is the direct responsibility of Subcommittee D04.40 onAsphalt Specifications.Current edition approved Dec. 1, 2009. Published January 2010. Originallyapproved in 1983. Last previous edition approved in 2004 as D4311 041. DOI:10.1520/D4311_D4311M-09.2Factors originally p

14、ublished for Groups 0 and 1 oils in Tables 7, 25, and 55 inD1250 52 T. Last previous edition D1250 04.3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards

15、Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.TABLE 1 Volume Reduction to 15CObservedTemperature,CVolume CorrectionA,BFactor to15CObservedTemperature,CVolume CorrectionA,BFactor to15CObserve

16、dTemperature,CVolume CorrectionA,BFactor to15CAB AB AB25.0 1.0254 1.0290 0 1.0095 1.0108 25.0 0.9937 0.992924.5 1.0251 1.0287 0.5 1.0092 1.0104 25.5 0.9934 0.992524.0 1.0248 1.0283 1.0 1.0088 1.0101 26.0 0.9931 0.992123.5 1.0244 1.0279 1.5 1.0085 1.0097 26.5 0.9928 0.991823.0 1.0241 1.0276 2.0 1.008

17、2 1.0094 27.0 0.9925 0.991422.5 1.0238 1.0272 2.5 1.0079 1.0090 27.5 0.9922 0.991122.0 1.0235 1.0268 3.0 1.0076 1.0086 28.0 0.9918 0.990721.5 1.0232 1.0265 3.5 1.0073 1.0083 28.5 0.9915 0.990421.0 1.0228 1.0261 4.0 1.0069 1.0079 29.0 0.9912 0.990020.5 1.0225 1.0257 4.5 1.0066 1.0076 29.5 0.9909 0.98

18、9720.0 1.0222 1.0254 5.0 1.0063 1.0072 30.0 0.9906 0.989319.5 1.0219 1.0250 5.5 1.0060 1.0068 30.5 0.9903 0.988919.0 1.0216 1.0246 6.0 1.0057 1.0065 31.0 0.9900 0.988618.5 1.0212 1.0243 6.5 1.0054 1.0061 31.5 0.9897 0.988218.0 1.0209 1.0239 7.0 1.0050 1.0057 32.0 0.9893 0.987917.5 1.0206 1.0235 7.5

19、1.0047 1.0054 32.5 0.9890 0.987517.0 1.0203 1.0232 8.0 1.0044 1.0050 33.0 0.9887 0.987216.5 1.0200 1.0228 8.5 1.0041 1.0047 33.5 0.9884 0.986816.0 1.0196 1.0224 9.0 1.0038 1.0043 34.0 0.9881 0.986515.5 1.0193 1.0221 9.5 1.0035 1.0039 34.5 0.9878 0.986115.0 1.0190 1.0217 10.0 1.0031 1.0036 35.0 0.987

20、5 0.985814.5 1.0187 1.0213 10.5 1.0028 1.0032 35.5 0.9872 0.985414.0 1.0184 1.0210 11.0 1.0025 1.0029 36.0 0.9869 0.985013.5 1.0180 1.0206 11.5 1.0022 1.0025 36.5 0.9865 0.984713.0 1.0177 1.0202 12.0 1.0019 1.0022 37.0 0.9862 0.984312.5 1.0174 1.0199 12.5 1.0016 1.0018 37.5 0.9859 0.984012.0 1.0171

21、1.0195 13.0 1.0013 1.0014 38.0 0.9856 0.983611.5 1.0168 1.0192 13.5 1.0009 1.0011 38.5 0.9853 0.983311.0 1.0165 1.0188 14.0 1.0006 1.0007 39.0 0.9850 0.982910.5 1.0161 1.0184 14.5 1.0003 1.0004 39.5 0.9847 0.982610.0 1.0158 1.0181 15.0 1.0000 1.0000 40.0 0.9844 0.98229.5 1.0155 1.0177 15.5 0.9997 0.

22、9996 40.5 0.9841 0.98199.0 1.0152 1.0173 16.0 0.9994 0.9993 41.0 0.9837 0.98158.5 1.0149 1.0170 16.5 0.9991 0.9989 41.5 0.9834 0.98128.0 1.0145 1.0166 17.0 0.9987 0.9986 42.0 0.9831 0.98087.5 1.0142 1.0162 17.5 0.9984 0.9982 42.5 0.9828 0.98057.0 1.0139 1.0159 18.0 0.9981 0.9979 43.0 0.9825 0.98016.

23、5 1.0136 1.0155 18.5 0.9978 0.9975 43.5 0.9822 0.97976.0 1.0133 1.0152 19.0 0.9975 0.9971 44.0 0.9819 0.97945.5 1.0130 1.0148 19.5 0.9972 0.9968 44.5 0.9816 0.97905.0 1.0126 1.0144 20.0 0.9969 0.9964 45.0 0.9813 1.97874.5 1.0123 1.0141 20.5 0.9965 0.9961 45.5 0.9809 0.97834.0 1.0120 1.0137 21.0 0.99

24、62 0.9957 46.0 0.9806 0.97803.5 1.0117 1.0133 21.5 0.9959 0.9953 46.5 0.9803 0.97763.0 1.0114 1.0130 22.0 0.9956 0.9950 47.0 0.9800 0.97732.5 1.0111 1.0126 22.5 0.9953 0.9946 47.5 0.9797 0.97692.0 1.0107 1.0122 23.0 0.9950 0.9943 48.0 0.9794 0.97661.5 1.0104 1.0119 23.5 0.9947 0.9939 48.5 0.9791 0.9

25、7621.0 1.0101 1.0115 24.0 0.9944 0.9936 49.0 0.9788 0.97590.5 1.0098 1.0112 24.5 0.9940 0.9932 49.5 0.9785 0.975550.0 0.9782 0.9752 75.0 0.9628 0.9578 100.0 0.9476 0.940750.5 0.9779 0.9748 75.5 0.9625 0.9574 100.5 0.9473 0.940351.5 0.9772 0.9741 76.5 0.9619 0.9567 101.5 0.9467 0.939652.0 0.9769 0.97

26、38 77.0 0.9616 0.9564 102.0 0.9464 0.939351.0 0.9775 0.9745 76.0 0.9622 0.9571 101.0 0.9470 0.940052.5 0.9766 0.9734 77.5 0.9613 0.9561 102.5 0.9461 0.939053.5 0.9760 0.9727 78.5 0.9606 0.9554 103.5 0.9455 0.938354.0 0.9757 0.9724 79.0 0.9603 0.9550 104.0 0.9452 0.937954.5 0.9754 0.9720 79.5 0.9600

27、0.9547 104.5 0.9449 0.937653.0 0.9763 0.9731 78.0 0.9609 0.9557 103.0 0.9458 0.9386D4311/D4311M 092TABLE 1 ContinuedObservedTemperature,CVolume CorrectionA,BFactor to15CObservedTemperature,CVolume CorrectionA,BFactor to15CObservedTemperature,CVolume CorrectionA,BFactor to15CAB AB AB55.0 0.9751 0.971

28、7 80.0 0.9597 0.9543 105.0 0.9446 0.937355.5 0.9748 0.9713 80.5 0.9594 0.9540 105.5 0.9443 0.936956.0 0.9745 0.9710 81.0 0.9591 0.9536 106.0 0.9440 0.936656.5 0.9741 0.9706 81.5 0.9588 0.9533 106.5 0.9437 0.936357.0 0.9738 0.9703 82.0 0.9585 0.9530 107.0 0.9434 0.935957.5 0.9735 0.9699 82.5 0.9582 0

29、.9526 107.5 0.9431 0.935658.0 0.9732 0.9696 83.0 0.9579 0.9523 108.0 0.9428 0.935258.5 0.9729 0.9692 83.5 0.9576 0.9519 108.5 0.9425 0.934959.0 0.9726 0.9689 84.0 0.9573 0.9516 109.0 0.9422 0.934659.5 0.9723 0.9685 84.5 0.9570 0.9512 109.5 0.9419 0.934260.0 0.9720 0.9682 85.0 0.9567 0.9509 110.0 0.9

30、416 0.933960.5 0.9717 0.9678 85.5 0.9564 0.9506 110.5 0.9413 0.933561.0 0.9714 0.9675 86.0 0.9561 0.9502 111.0 0.9410 0.933261.5 0.9711 0.9671 86.5 0.9558 0.9499 111.5 0.9407 0.932962.0 0.9708 0.9668 87.0 0.9555 0.9495 112.0 0.9404 0.932562.5 0.9704 0.9664 87.5 0.9552 0.9492 112.5 0.9401 0.932263.0

31、0.9701 0.9661 88.0 0.9549 0.9488 113.0 0.9398 0.931963.5 0.9698 0.9658 88.5 0.9546 0.9485 113.5 0.9395 0.931564.0 0.9695 0.9654 89.0 0.9542 0.9482 114.0 0.9392 0.931264.5 0.9692 0.9651 89.5 0.9539 0.9478 114.5 0.9389 0.930965.0 0.9689 0.9647 90.0 0.9536 0.9475 115.0 0.9386 0.930565.5 0.9686 0.9644 9

32、0.5 0.9533 0.9471 115.5 0.9383 0.930266.0 0.9683 0.9640 91.0 0.9530 0.9468 116.0 0.9380 0.929866.5 0.9680 0.9637 91.5 0.9527 0.9464 116.5 0.9377 0.929567.0 0.9677 0.9633 92.0 0.9524 0.9461 117.0 0.9374 0.929267.5 0.9674 0.9630 92.5 0.9521 0.9458 117.5 0.9371 0.928868.0 0.9671 0.9626 93.0 0.9518 0.94

33、54 118.0 0.9368 0.928568.5 0.9668 0.9623 93.5 0.9515 0.9451 118.5 0.9365 0.928269.0 0.9665 0.9619 94.0 0.9512 0.9447 119.0 0.9362 0.927869.5 0.9661 0.9616 94.5 0.9509 0.9444 119.5 0.9359 0.927570.0 0.9658 0.9612 95.0 0.9506 0.9441 120.0 0.9356 0.927270.5 0.9655 0.9609 95.5 0.9503 0.9437 120.5 0.9353

34、 0.926871.0 0.9652 0.9605 96.0 0.9500 0.9434 121.0 0.9350 0.926571.5 0.9649 0.9602 96.5 0.9597 0.9430 121.5 0.9347 0.926272.0 0.9646 0.9599 97.0 0.9494 0.9427 122.0 0.9344 0.925872.5 0.9643 0.9595 97.5 0.9491 0.9424 122.5 0.9341 0.925573.0 0.9640 0.9592 98.0 0.9488 0.9420 123.0 0.9338 0.925173.5 0.9

35、637 0.9588 98.5 0.9485 0.9417 123.5 0.9335 0.924874.0 0.9634 0.9585 99.0 0.9482 0.9413 124.0 0.9332 0.924574.5 0.9631 0.9581 99.5 0.9479 0.9410 124.5 0.9329 0.9241125.0 0.9326 0.9238 150.0 0.9177 0.9072 175.0 0.9031 0.8909125.5 0.9323 0.9235 150.5 0.9174 0.9069 175.5 0.9028 0.8906126.0 0.9320 0.9231

36、 151.0 0.9171 0.9066 176.0 0.9025 0.8903126.5 0.9317 0.9228 151.5 0.9169 0.9063 176.5 0.9022 0.8900127.0 0.9314 0.9225 152.0 0.9166 0.9059 177.0 0.9019 0.8896127.5 0.9311 0.9221 152.5 0.9163 0.9056 177.5 0.9016 0.8893128.0 0.9308 0.9218 153.0 0.9160 0.9053 178.0 0.9013 0.8890128.5 0.9305 0.9215 153.

37、5 0.9157 0.9049 178.5 0.9010 0.8887129.0 0.9302 0.9211 154.0 0.9154 0.9046 179.0 0.9008 0.8884129.5 0.9299 0.9208 154.5 0.9151 0.9043 179.5 0.9005 0.8880130.0 0.9296 0.9205 155.0 0.9148 0.9040 180.0 0.9002 0.8877130.5 0.9293 0.9201 155.5 0.9145 0.9036 180.5 0.8999 0.8874131.0 0.9290 0.9198 156.0 0.9

38、142 0.9033 181.0 0.8996 0.8871131.5 0.9287 0.9195 156.5 0.9139 0.9030 181.5 0.8993 0.8867132.0 0.9284 0.9191 157.0 0.9136 0.9026 182.0 0.8990 0.8864132.5 0.9281 0.9188 157.5 0.9133 0.9023 182.5 0.8987 0.8861133.0 0.9278 0.9185 158.0 0.9130 0.9020 183.0 0.8984 0.8858133.5 0.9275 0.9181 158.5 0.9127 0

39、.9017 183.5 0.8981 0.8855134.0 0.9272 0.9178 159.0 0.9124 0.9013 184.0 0.8979 0.8851134.5 0.9269 0.9175 159.5 0.9121 0.9010 184.5 0.8976 0.8848D4311/D4311M 093TABLE 1 ContinuedObservedTemperature,CVolume CorrectionA,BFactor to15CObservedTemperature,CVolume CorrectionA,BFactor to15CObservedTemperatur

40、e,CVolume CorrectionA,BFactor to15CAB AB AB135.0 0.9266 0.9171 160.0 0.9119 0.9007 185.0 0.8973 0.8845135.5 0.9263 0.9168 160.5 0.9116 0.9004 185.5 0.8970 0.8842136.0 0.9260 0.9165 161.0 0.9113 0.9000 186.0 0.8967 0.8839136.5 0.9257 0.9162 161.5 0.9110 0.8997 186.5 0.8964 0.8835137.0 0.9254 0.9158 1

41、62.0 0.9107 0.8994 187.0 0.8961 0.8832137.5 0.9251 0.9155 162.5 0.9104 0.8991 187.5 0.8958 0.8829138.0 0.9248 0.9152 163.0 0.9101 0.8987 188.0 0.8955 0.8826138.5 0.9245 0.9148 163.5 0.9098 0.8984 188.5 0.8952 0.8823139.0 0.9242 0.9145 164.0 0.9095 0.8981 189.0 0.8950 0.8819139.5 0.9239 0.9142 164.5

42、0.9092 0.8977 189.5 0.8947 0.8816140.0 0.9236 0.9138 165.0 0.9089 0.8974 190.0 0.8944 0.8813140.5 0.9234 0.9135 165.5 0.9086 0.8971 190.5 0.8941 0.8810141.0 0.9231 0.9132 166.0 0.9083 0.8968 191.0 0.8938 0.8807141.5 0.9228 0.9128 166.5 0.9080 0.8964 191.5 0.8935 0.8803142.0 0.9225 0.9125 167.0 0.907

43、8 0.8961 192.0 0.8932 0.8800142.5 0.9222 0.9122 167.5 0.9075 0.8958 192.5 0.8929 0.8797143.0 0.9219 0.9118 168.0 0.9072 0.8955 193.0 0.8926 0.8794143.5 0.9216 0.9115 168.5 0.9069 0.8951 193.5 0.8924 0.8791144.0 0.9213 0.9112 169.0 0.9066 0.8948 194.0 0.8921 0.8787144.5 0.9210 0.9109 169.5 0.9063 0.8

44、945 194.5 0.8918 0.8784145.0 0.9207 0.9105 170.0 0.9060 0.8942 195.0 0.8915 0.8781145.5 0.9204 0.9102 170.5 0.9057 0.8939 195.5 0.8912 0.8778146.0 0.9201 0.9099 171.0 0.9054 0.8935 196.0 0.8909 0.8775146.5 0.9198 0.9095 171.5 0.9051 0.8932 196.5 0.8906 0.8771147.0 0.9195 0.9092 172.0 0.9048 0.8929 1

45、97.0 0.8903 0.8768147.5 0.9192 0.9089 172.5 0.9045 0.8926 197.5 0.8901 0.8765148.0 0.9189 0.9086 173.0 0.9042 0.8922 198.0 0.8898 0.8762148.5 0.9186 0.9082 173.5 0.9040 0.8919 198.5 0.8895 0.8759149.0 0.9183 0.9079 174.0 0.9037 0.8916 199.0 0.8892 0.8755149.5 0.9180 0.9076 174.5 0.9034 0.8913 199.5

46、0.8889 0.8752200.0 0.8886 0.8749 225.0 0.8743 0.8592 250.0 0.8602 0.8437200.5 0.8883 0.8746 225.5 0.8740 0.8589 250.5 0.8599 0.8434201.0 0.8880 0.8743 226.0 0.8738 0.8585 251.0 0.8597 0.8431201.5 0.8878 0.8740 226.5 0.8735 0.8582 251.5 0.8594 0.8438202.0 0.8875 0.8736 227.0 0.8732 0.8579 252.0 0.859

47、1 0.8425202.5 0.8872 0.8733 227.5 0.8729 0.8576 252.5 0.8588 0.8422203.0 0.8869 0.8730 228.0 0.8726 0.8573 253.0 0.8585 0.8419203.5 0.8866 0.8727 228.5 0.8723 0.8570 253.5 0.8583 0.8415204.0 0.8863 0.8724 229.0 0.8721 0.8567 254.0 0.8580 0.8412204.5 0.8860 0.8721 229.5 0.8718 0.8564 254.5 0.8577 0.8

48、409205.0 0.8857 0.8717 230.0 0.8715 0.8560 255.0 0.8574 0.8406205.5 0.8855 0.8714 230.5 0.8712 0.8557 255.5 0.8571 0.8403206.0 0.8852 0.8711 231.0 0.8709 0.8554 256.0 0.8569 0.8400206.5 0.8849 0.8708 231.5 0.8706 0.8551 256.5 0.8566 0.8397207.0 0.8846 0.8705 232.0 0.8704 0.8548 257.0 0.8563 0.839420

49、7.5 0.8843 0.8702 232.5 0.8701 0.8545 257.5 0.8560 0.8391208.0 0.8840 0.8698 233.0 0.8698 0.8542 258.0 0.8557 0.8388208.5 0.8837 0.8695 233.5 0.8695 0.8539 258.5 0.8555 0.8385209.0 0.8834 0.8692 234.0 0.8692 0.8536 259.0 0.8552 0.8382209.5 0.8832 0.8689 234.5 0.8689 0.8533 259.5 0.8549 0.8379210.0 0.8829 0.8686 235.0 0.8687 0.8529 260.0 0.8546 0.8376210.5 0.8826 0.8683 235.5 0.8684 0.8526 260.5 0.8544 0.8373211.0 0.8823 0.8680 236.0 0.8681 0.8523 261.0 0.8541