ASTM D3956-2012 Standard Specification for Methane Thermophysical Property Tables《甲烷热物理性质表的标准规格》.pdf
《ASTM D3956-2012 Standard Specification for Methane Thermophysical Property Tables《甲烷热物理性质表的标准规格》.pdf》由会员分享,可在线阅读,更多相关《ASTM D3956-2012 Standard Specification for Methane Thermophysical Property Tables《甲烷热物理性质表的标准规格》.pdf(18页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D3956 07 D3956 12Standard Specification forMethane Thermophysical Property Tables1This standard is issued under the fixed designation D3956; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A
2、number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 The thermophysical property tables for methane are for use in the calculation of the pressure-volume-temperature (PVT),thermodynamic, a
3、nd transport properties of methane for process design and operations. Tables Three tables are provided forgaseous and liquid methane at temperatures between 90 K and 600K at pressures to 20 MPa. One table provides properties at theconditions of 30 MPa. Two tables provide properties for the liquid an
4、d vapor phases at liquid-vapor equilibrium (saturationproperties). The otherthird table provides properties at selected T,p points for the equilibrium phase at those conditions. The tableswere developed by the National Institute of Standards and Technology from a Standard Reference Database product
5、REFPROP,version 7.0.9.0.2. Applicability2.1 These tables apply directly only to pure gaseous methane. However, it is expected that they may find substantial use inmathematical models and tables for the thermophysical properties of mixtures containing methane.3. Tables3.1 Thermophysical Properties of
6、 Coexisting Gaseous and Liquid Methane, Methane Liquid at Liquid-Vapor Equilibrium, in SIunits.3.2 Thermophysical Properties of Methane Vapor at Liquid-Vapor Equilibrium, in SI units.3.3 Thermophysical Properties of Methane Along Isobars, in SI units.3.4 The tabulated properties are: = molar density
7、 (moll-1) = molar density (molL-1)H = molar enthalpy (Jmol-1)S = molar entropy (JK-1mol-1)Cv = constant volume molar heat capacity (JK-1mol-1)Cp = constant pressure molar heat capacity (JK-1mol-1)c = speed of sound (ms-1) = viscosity (Pas) = thermal conductivity (mWm-1K-1)3.5 These tables were produ
8、ced by equations from a computer package, “NIST Standard Reference Database 23; ReferenceFluid Thermodynamic and Transport Properties Database (REFPROP): Version 7.0.”9.0.” A wide selection of units (SI units,engineering units, chemical units) and additional properties are available with this progra
9、m.24. Additional Information4.1 Reference state properties are required to calculate certain of the thermodynamic properties (enthalpy, entropy, etc.) froman equation of state formulation. The reference state properties used to generate the tables in this specification are: enthalpy, H,and entropy,
10、S, at 298.15 K and 0.101325 MPa (H = 10018 J/mol and S = 186.266 J/(mol K). The molar mass of methane is 16.043g/mol.1 This specification is under the jurisdiction of ASTM Committee D03 on Gaseous Fuels and is the direct responsibility of Subcommittee D03.08 on ThermophysicalProperties.Current editi
11、on approved June 1, 2007Nov. 1, 2012. Published July 2007December 2012. Originally approved in 1982. Last previous edition approved in 20032007 asD3956 93 (2003)D3956 07. 1. DOI: 10.1520/D3956-07.10.1520/D3956-12.2 Available from Standard Reference Data, National Institute of Standards and Technolog
12、y (NIST), 100 Bureau Drive, Stop 3460, Gaithersburg, MD 20899.This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all ch
13、anges accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.
14、United States15. Keywords5.1 methane gas tables; natural gas; thermodynamic properties of methane; transport properties of methaneD3956 122TABLE 1 Thermophysical Properties of Coexisting Gaseous and Liquid MethaneT p H S Cv Cp c K MPa moll-1 Jmol-1 Jmol-1K-1 Jmol-1K-1 Jmol-1K-1 ms-1 Pas mWm-1K-190.7
15、0 0.011705 28.141 -15564 9899.5 34.78 54.03 1538.5 201.9 211.290.70 0.011705 0.015641 -6832.4 9995.8 25.24 33.85 249.13 3.609 8.79292 0.013801 28.033 -15493 9900.3 34.64 54.10 1526.7 194.8 209.692 0.013801 0.018199 -6791.7 9994.9 25.27 33.92 250.76 3.658 8.94994 0.017613 27.866 -15385 9901.5 34.44 5
16、4.23 1508.4 184.4 207.294 0.017613 0.02277 -6729.6 9993.5 25.32 34.02 253.2 3.732 9.19296 0.022233 27.698 -15276 9902.6 34.26 54.37 1489.8 174.7 204.796 0.022233 0.028198 -6668.2 9992.3 25.37 34.14 255.57 3.808 9.43898 0.027778 27.528 -15167 9903.7 34.08 54.52 1471.0 165.6 202.298 0.027778 0.034587
17、-6607.4 9991.1 25.43 34.28 257.87 3.883 9.687100 0.034376 27.357 -15058 9904.8 33.91 54.68 1452.0 157.2 199.6100 0.034376 0.042048 -6547.5 9989.9 25.49 34.42 260.09 3.960 9.939102 0.042160 27.185 -14948 9905.9 33.74 54.85 1432.9 149.3 197.0102 0.042160 0.050695 -6488.4 9988.9 25.55 34.58 262.24 4.03
18、6 10.19104 0.051275 27.010 -14838 9907.0 33.58 55.04 1413.6 141.9 194.3104 0.051275 0.060649 -6430.3 9987.8 25.62 34.76 264.31 4.114 10.46106 0.061868 26.835 -14728 9908.0 33.42 55.23 1394.1 135.0 191.6106 0.061868 0.072034 -6373.1 9986.9 25.69 34.95 266.29 4.192 10.72108 0.074099 26.657 -14617 9909
19、.1 33.27 55.44 1374.5 128.6 188.8108 0.074099 0.08498 -6316.9 9985.9 25.76 35.16 268.20 4.270 10.99110 0.08813 26.478 -14505 9910.1 33.12 55.67 1354.7 122.7 186.1110 0.08813 0.099622 -6261.8 9985.0 25.84 35.38 270.01 4.349 11.26112 0.10413 26.297 -14393 9911.1 32.97 55.88 1334.8 117.0 183.3112 0.104
20、13 0.1161 -6207.9 9984.2 25.92 35.62 271.75 4.429 11.54114 0.12228 26.113 -14281 9912.1 32.82 56.13 1314.7 111.7 180.5114 0.12228 0.13455 -6155.2 9983.4 26.01 35.88 273.39 4.510 11.82116 0.14275 25.928 -14168 9913.1 32.68 56.38 1294.4 106.8 177.7116 0.14275 0.15514 -6103.8 9982.6 26.10 36.16 274.94
21、4.591 12.11118 0.16574 25.740 -14054 9914.0 32.54 56.65 1274.0 102.2 174.9118 0.16574 0.17801 -6053.8 9981.8 26.20 36.46 276.4 4.674 12.41120 0.19143 25.551 -13940 9915.0 32.40 56.94 1253.5 97.91 172.0120 0.19143 0.20332 -6005.2 9981.1 26.30 36.79 277.76 4.757 12.71122 0.22002 25.358 -13825 9915.9 3
22、2.26 57.25 1232.7 93.87 169.2122 0.22002 0.23125 -5958.1 9980.4 26.40 37.14 279.03 4.841 13.02124 0.2517 25.163 -13710 9916.8 32.13 57.57 1211.9 90.07 166.4124 0.2517 0.26197 -5912.6 9979.7 26.50 37.51 280.21 4.926 13.33126 0.28667 24.966 -13594 9917.8 32.00 57.92 1190.8 86.50 163.5126 0.28667 0.295
23、67 -5868.7 9979.1 26.62 37.92 281.28 5.012 13.66128 0.32514 24.765 -13477 9918.7 31.88 58.29 1169.5 83.13 160.6128 0.32514 0.33254 -5826.6 9978.4 26.73 38.36 282.25 5.100 13.99130 0.36732 24.562 -13359 9919.6 31.76 58.68 1148.1 79.95 157.8130 0.36732 0.37278 -5786.3 9977.8 26.85 38.84 283.13 5.188 1
24、4.33132 0.41341 24.355 -13240 9920.5 31.64 59.11 1126.4 76.94 154.9132 0.41341 0.41662 -5747.8 9977.2 26.98 39.35 283.90 5.278 14.69134 0.46363 24.145 -13121 9921.3 31.52 59.57 1104.6 74.09 152.1134 0.46363 0.46428 -5711.4 9976.6 27.11 39.91 284.57 5.370 15.05136 0.51819 23.931 -13000 9922.2 31.41 6
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD39562012STANDARDSPECIFICATIONFORMETHANETHERMOPHYSICALPROPERTYTABLES 甲烷 物理性质 标准 规格 PDF

链接地址:http://www.mydoc123.com/p-515903.html