ASTM D633-2011(2016) Standard Volume Correction Table for Road Tar《筑路焦油的标准体积修正表》.pdf
《ASTM D633-2011(2016) Standard Volume Correction Table for Road Tar《筑路焦油的标准体积修正表》.pdf》由会员分享,可在线阅读,更多相关《ASTM D633-2011(2016) Standard Volume Correction Table for Road Tar《筑路焦油的标准体积修正表》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: D633 11 (Reapproved 2016)Standard Volume Correction Table forRoad Tar1This standard is issued under the fixed designation D633; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in par
2、entheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1. Scope1.1 This table (Table 1) has been prepared by the NationalInstitut
3、e of Standards and Technology to meet a demand fromthe tar industry for a short and convenient table for reducingvolumes of road tar to the basis of 60F (15.6C) when extremeaccuracy is not required. The table shows the volume occupiedat 60F (15.6C) by a quantity of material occupying unitvolume at t
4、he indicated temperature.1.2 UnitsThe values stated in inch-pound units are to beregarded as the standard. The values given in2. Referenced Documents2.1 ASTM Standards:2D490 Specification for Road Tar3. Significance and Use3.1 Tars change in volume with changes in temperature.They are loaded or tran
5、sferred at widely varying temperatures.Volume correction factors are used to adjust bulk volumesmeasured at those temperatures with corresponding volumes ata base temperature of either 60F or 15.6C for the purposes ofcustody transfer and accounting operations.3.2 Correction factors as provided in th
6、is table have provento be sufficiently accurate for the intended purposes.3.3 The coefficient of expansion for Specification D490Type RT-12 at 60F (15.6C) per degree F is 0.00030.1This standard is under the jurisdiction of ASTM Committee D04 on Road andPaving Materials and is the direct responsibili
7、ty of Subcommittee D04.43 onSpecifications and Test for Tar and Tar Products.Current edition approved July 1, 2016. Published August 2016. Originallyapproved in 1941. Last previous edition approved in 2011 as D633 11. DOI:10.1520/D0633-11R16.2For referenced ASTM standards, visit the ASTM website, ww
8、w.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1TABLE
9、1VolumeCorrectionTableforTarLegend:t=observedtemperatureindegreesFahrenheit;tc=observedtemperatureindegreesCelcius;M=multiplierforreducingvolumestothebasisof60(15.6C)ttcMttcMttcMttcMttcMttcMttcMttcM017.781.0183351.671.00767021.110.997010540.560.986714060.000.976617579.440.965721098.8909589245118.330
10、.9474117.221.0180362.221.00737121.670.996710641.110.986414160.560.976317680.000.966421199.440.9567246118.890.9471216.671.0177372.781.00707222.220.996410741.670.986114261.110.976017780.560.9661212100.000.9564247119.440.9469316.111.0174383.331.00677322.780.996110842.220.985814361.670.975717881.110.965
11、8213100.560.9561248120.000.9466415.561.0171393.891.00647423.330.995810942.780.985514462.220.975417981.670.9655214101.110.9558249120.560.9463515.001.0168404.441.00607523.890.995511043.330.985214562.780.975118082.220.9553215101.670.9556614.441.0165415.001.00577624.440.995211143.890.984914663.330.97481
12、8182.780.9650216102.220.9553713.891.0162425.561.00547725.000.994911244.440.984614763.890.974618283.330.9647217102.780.9550813.331.0158436.111.00517825.560.994611345.000.984314864.440.974318383.890.9644218103.330.9547912.781.0155446.671.00487926.110.994311445.560.984114965.000.974018484.440.964121910
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMD63320112016STANDARDVOLUMECORRECTIONTABLEFORROADTAR 筑路 焦油 标准 体积 修正 PDF

链接地址:http://www.mydoc123.com/p-511997.html