ASTM B514-2005(2014) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe《焊接的镍铁铬合金管的标准规格》.pdf
《ASTM B514-2005(2014) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe《焊接的镍铁铬合金管的标准规格》.pdf》由会员分享,可在线阅读,更多相关《ASTM B514-2005(2014) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe《焊接的镍铁铬合金管的标准规格》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: B514 05 (Reapproved 2014)Standard Specification forWelded Nickel-Iron-Chromium Alloy Pipe1This standard is issued under the fixed designation B514; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revis
2、ion. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification2covers nickel-iron-chromium alloysin the form of welded, cold-worked, and annealed pipe forgeneral corrosive
3、service and heat-resisting applications. Theseproducts are furnished in three alloys: UNS N08120, UNSN08800, and UNS N08810.3Alloy UNS N08800 is employednormally in service temperatures up to and including 1100F(593C). Alloys UNS N08120 and UNS N08810 are employednormally in service temperatures abo
4、ve 1100F where resis-tance to creep and rupture is required, and are annealed todevelop controlled grain size for optimum properties in thistemperature range.1.2 This specification covers outside diameter and nominalwall pipe shown in ANSI B36.19. Pipe having other dimen-sions may be furnished provi
5、ded such pipe complies with allother requirements of the specification.1.3 The values stated in inch-pound units are to be regardedas standard. The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.4 This stand
6、ard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to become familiarwith all hazards including those identified in the appropriateMaterial Safety Data Sheet (MSDS) for this product/materialas provided by t
7、he manufacturer, to establish appropriatesafety and health practices, and determine the applicability ofregulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:4B775 Specification for General Requirements for Nickel andNickel Alloy Welded PipeB899 Terminology Relating to Non-fe
8、rrous Metals and Al-loys2.2 ANSI Standard:B36.19 Stainless Steel Pipe53. Terminology3.1 Terms defined in Terminology B899 shall apply unlessdefined otherwise in this standard.4. General Requirement4.1 Material furnished in accordance with this specificationshall conform to the applicable requirement
9、s of the currentedition of Specification B775 unless otherwise providedherein.5. Ordering Information5.1 Orders for material under this specification shouldinclude the following information:5.1.1 Alloy name or UNS number.5.1.2 ASTM designation and year of issue.5.1.3 Condition (temper) (Table 1).5.1
10、.4 Dimensions:5.1.4.1 Nominal pipe size or outside diameter and schedulenumber or nominal wall thickness.5.1.4.2 Length (specific or random).5.1.5 Quantity (feet or metres, or number of pieces).5.1.6 CertificationState if certification or a report of testresults is required.1This specification is un
11、der the jurisdiction of ASTM Committee B02 onNonferrous Metals and Alloys and is the direct responsibility of SubcommitteeB02.07 on Refined Nickel and Cobalt and Their Alloys.Current edition approved Oct. 1, 2014. Published October 2014. Originallyapproved in 1970. Last previous edition approved in
12、2009 as B514 05 (2009).DOI: 10.1520/B0514-05R14.2For ASME Boiler and Pressure Code applications see related SpecificationSB-514 in Section II of that Code.3New designation established in accordance with ASTM E527 and SAE J1086,Practice for Numbering Metals and Alloys (UNS).4For referenced ASTM stand
13、ards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.5Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor,
14、 New York, NY 10036, http:/www.ansi.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States15.1.7 Samples for Product (Check) AnalysisState whethersamples for product (check) analysis should be furnished.5.1.8 Purchaser InspectionIf the p
15、urchaser wishes towitness tests or inspection of material at the place ofmanufacture, the purchase order must so state indicating whichtests or inspections are to be witnessed.6. Materials and Manufacture6.1 Pipe shall be made from flat-rolled alloy by an auto-matic welding process with no addition
16、of filler metal. Subse-quent to welding and prior to final solution treatment, thematerial shall be cold worked either in both weld and basemetal or in weld metal only.6.2 Pipe shall be furnished with a scale-free finish. Whenbright annealing is used, descaling is not necessary.7. Chemical Compositi
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMB51420052014STANDARDSPECIFICATIONFORWELDEDNICKELIRONCHROMIUMALLOYPIPE 焊接 镍铁铬 合金管 标准 规格 PDF
链接地址:http://www.mydoc123.com/p-461447.html