ASME A17 1-2016 Safety Code for Elevators and Escalators Includes Requirements for Elevators Escalators Dumbwaiters Moving Walks Material Lifts and Dumbwaiters With Automatic Trans.pdf

《ASME A17 1-2016 Safety Code for Elevators and Escalators Includes Requirements for Elevators Escalators Dumbwaiters Moving Walks Material Lifts and Dumbwaiters With Automatic Trans.pdf》由会员分享，可在线阅读，更多相关《ASME A17 1-2016 Safety Code for Elevators and Escalators Includes Requirements for Elevators Escalators Dumbwaiters Moving Walks Material Lifts and Dumbwaiters With Automatic Trans.pdf（598页珍藏版）》请在麦多课文档分享上搜索。

1、Safety Code for Elevators and EscalatorsIncludes Requirements for Elevators,Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer DevicesAN AMERICAN NATIONAL STANDARDASME A17.1-2016/CSA B44-16(Revision of ASME A17.1-2013/CSA B44-13)ASME A17.1-2016/CSA B44-16(

2、Revision of ASME A17.1-2013/CSA B44-13)Safety Code forElevators andEscalatorsIncludes Requirements for Elevators,Escalators, Dumbwaiters, Moving Walks,Material Lifts, and Dumbwaiters WithAutomatic Transfer DevicesAN AMERICAN NATIONAL STANDARDDate of Issuance: November 30, 2016Reissued on January 16,

3、 2017, to address errataThe next edition of this Code is scheduled for publication in 2019. This Code will become effective6 months after the Date of Issuance.ASME issues written replies to inquiries concerning interpretations of technical aspects of this Code.Interpretations are published on the AS

4、ME Web site under the Committee Pages athttp:/cstools.asme.org/ as they are issued.Errata to codes and standards may be posted on the ASME Web site under the Committee Pages toprovide corrections to incorrectly published items, or to correct typographical or grammatical errorsin codes and standards.

5、 Such errata shall be used on the date posted.The Committee Pages can be found at http:/cstools.asme.org/. There is an option available toautomatically receive an e-mail notification when errata are posted to a particular code or standard.This option can be found on the appropriate Committee Page af

6、ter selecting “Errata” in the “PublicationInformation” section.ASME is the registered trademark of The American Society of Mechanical Engineers.This code or standard was developed under procedures accredited as meeting the criteria for American NationalStandards. The Standards Committee that approve

7、d the code or standard was balanced to assure that individuals fromcompetent and concerned interests have had an opportunity to participate. The proposed code or standard was madeavailable for public review and comment that provides an opportunity for additional public input from industry, academia,

8、regulatory agencies, and the public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document, and do

9、es not undertake to insure anyone utilizing a standard against liability forinfringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expresslyadvised that determination of the validity of any such patent rights, and the risk of infringement of su

10、ch rights, isentirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document is

11、sued in accordance with the establishedASME procedures and policies, which precludes the issuance of interpretations by individuals.No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.The American

12、 Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2016 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.CONTENTSASME Foreword . viiiASME Committee Roster xiiiCSA Committees xixASME Preface . xxiCSA Preface . xxivSummary of Changes xxvP

13、art 1 General. 11.1 Scope 11.2 Purpose and Exceptions 21.3 Definitions . 2Part 2 Electric Elevators 192.1 Construction of Hoistways and Hoistway Enclosures 192.2 Pits 212.3 Location and Guarding of Counterweights 232.4 Vertical Clearances and Runbys for Cars and Counterweights . 242.5 Horizontal Car

14、 and Counterweight Clearances 262.6 Protection of Space Below Hoistways . 272.7 Machinery Spaces, Machine Rooms, Control Spaces, and ControlRooms 272.8 Equipment in Hoistways, Machinery Spaces, Machine Rooms,Control Spaces, and Control Rooms 352.9 Machinery and Sheave Beams, Supports, and Foundation

15、s 372.10 Guarding of Equipment and Standard Railing 392.11 Protection of Hoistway Openings . 392.12 Hoistway Door Locking Devices and Electric Contacts, and HoistwayAccess Switches . 472.13 Power Operation of Hoistway Doors and Car Doors 522.14 Car Enclosures, Car Doors and Gates, and Car Illuminati

16、on . 572.15 Car Frames and Platforms 672.16 Capacity and Loading 702.17 Car and Counterweight Safeties 752.18 Speed Governors . 782.19 Ascending Car Overspeed and Unintended Car MovementProtection . 812.20 Suspension Means and Their Connections 832.21 Counterweights 922.22 Buffers and Bumpers . 932.

17、23 Car and Counterweight Guide Rails, Guide-Rail Supports, andFastenings . 962.24 Driving Machines and Sheaves . 1052.25 Terminal Stopping Devices . 1082.26 Operating Devices and Control Equipment . 1122.27 Emergency Operation and Signaling Devices . 1232.28 Layout Drawings 1402.29 Identification 14

18、02.30 Sway Control Guides . 141Part 3 Hydraulic Elevators 1423.1 Construction of Hoistways and Hoistway Enclosures 142iii3.2 Pits 1423.3 Location and Guarding of Counterweights 1423.4 Bottom and Top Clearances and Runbys for Cars andCounterweights 1423.5 Horizontal Car and Counterweight Clearances 1

19、433.6 Protection of Spaces Below Hoistway . 1433.7 Machinery Spaces, Machine Rooms, Control Spaces, and ControlRooms 1443.8 Electrical Equipment, Wiring, Pipes, and Ducts in Hoistway,Machinery Spaces, Machine Rooms, Control Spaces, and ControlRooms 1443.9 Machinery and Sheave Beams, Supports, and Fo

20、undations 1443.10 Guarding of Exposed Auxiliary Equipment . 1453.11 Protection of Hoistway Landing Openings 1453.12 Hoistway Door Locking Devices, Electric Contacts, and Hoistway AccessSwitches . 1453.13 Power Operation, Power Opening, and Power Closing of HoistwayDoors and Car Doors or Gates . 1453

21、.14 Car Enclosures, Car Doors and Gates, and Car Illumination . 1453.15 Car Frames and Platforms 1453.16 Capacity and Loading 1463.17 Car Safeties, Counterweight Safeties, Plunger Gripper, andGovernors . 1463.18 Hydraulic Jacks 1483.19 Valves, Pressure Piping, and Fittings . 1503.20 Ropes and Rope C

22、onnections . 1533.21 Counterweights 1533.22 Buffers and Bumpers . 1533.23 Guide Rails, Guide-Rail Supports, and Fastenings . 1543.24 Hydraulic Machines and Tanks . 1543.25 Terminal Stopping Devices . 1543.26 Operating Devices and Control Equipment . 1563.27 Emergency Operation and Signaling Devices

23、. 1583.28 Layout Data . 1593.29 Identification 159Part 4 Elevators With Other Types of Driving Machines. 1604.1 Rack-and-Pinion Elevators 1604.2 Screw-Column Elevators . 1674.3 Hand Elevators 170Part 5 Special Application Elevators. 1745.1 Inclined Elevators 1745.2 Limited-Use/Limited-Application El

24、evators . 1805.3 Private Residence Elevators 1855.4 Private Residence Inclined Elevators 1945.5 Power Sidewalk Elevators 1975.6 Rooftop Elevators 2015.7 Special Purpose Personnel Elevators 2045.8 Marine Elevators . 2115.9 Mine Elevators . 2125.10 Elevators Used for Construction 2165.11 Wind Turbine

25、Tower Elevators . 2205.12 Outside Emergency Elevators 220Part 6 Escalators and Moving Walks 2226.1 Escalators 2226.2 Moving Walks . 235ivPart 7 Dumbwaiters and Material Lifts 2467.1 Power and Hand Dumbwaiters Without Automatic Transfer Devices 2467.2 Electric and Hand Dumbwaiters Without Automatic T

26、ransferDevices 2517.3 Hydraulic Dumbwaiters Without Automatic Transfer Devices . 2577.4 Material Lifts Without Automatic Transfer Devices 2587.5 Electric Material Lifts Without Automatic Transfer Devices 2627.6 Hydraulic Material Lifts Without Automatic Transfer Devices . 2687.7 Automatic Transfer D

27、evices 2697.8 Power Dumbwaiters With Automatic Transfer Devices 2707.9 Electric Material Lifts With Automatic Transfer Devices . 2707.10 Hydraulic Material Lifts With Automatic Transfer Devices 272Part 8 General Requirements . 2738.1 Security . 2738.2 Design Data and Formulas . 2748.3 Engineering Te

28、sts, Type Tests, and Certification . 2938.4 Elevator Seismic Requirements . 3048.5 Escalator and Moving Walk Seismic Requirements 3308.6 Maintenance, Repair, Replacement, and Testing . 3338.7 Alterations 3578.8 Welding . 3768.9 Code Data Plate . 3778.10 Acceptance Inspections and Tests . 3778.11 Per

29、iodic Inspections and Witnessing of Tests 3948.12 Flood Resistances 401Part 9 Reference Codes, Standards, and Specifications . 4029.1 Reference Documents 4039.2 Procurement Information . 410Figures2.16.1.1 Inside Net Platform Areas for Passenger Elevators 712.20.9.4 Tapered Rope Sockets 882.20.9.5 W

30、edge Rope Sockets . 882.23.3 Elevator Guide Rails . 972.23.4.1-1 Maximum Weight of a Car With Rated Load or of Counterweight WithSafety Device for a Pair of Guide Rails as Specifiedin 2.23.4.1 . 992.23.4.1-2 Minimum Moment of Inertia About x-x Axis for a Single Guide RailWith Its Reinforcement . 100

31、2.27.3.1.6(h) Visual Signal . 1292.27.3.3.7 Panel Layout 1322.27.7.1 Phase I Emergency Recall Operation Instructions . 1352.27.7.2 Phase II Emergency In-Car Operation 1362.27.8 FEO-K1 Key . 1372.27.9 Elevator Corridor Call Station Pictograph . 1385.1.17.3 Vertical and Horizontal Components of Veloci

32、ty 1796.1.3.3.10 Dimensions 2246.1.6.9.1 Caution Sign . 2338.2.1.2 Minimum Rated Load for Passenger Elevators 2758.2.2.5.1 Turning Moment Based on Class of Loading 2788.2.4 Gravity Stopping Distances . 2808.2.5 Maximum Governor Tripping Speeds . 2818.2.6 Stopping Distances for Type B Car and Counter

33、weight Safeties 2838.2.7 Minimum Factors of Safety of Suspension Members of PowerPassenger and Freight Elevators 2868.2.8.1.1 Allowable Gross Loads . 288v8.2.9.1.3 Load Distribution 2928.4.3.1.3 Arc of Contact . 3058.4.8.2-1 12 kg/m (8 lb/ft) Guide-Rail Bracket Spacing . 3088.4.8.2-2 16.5 kg/m (11 l

34、b/ft) Guide-Rail Bracket Spacing 3098.4.8.2-3 18 kg/m (12 lb/ft) Guide-Rail Bracket Spacing 3108.4.8.2-4 22.5 kg/m (15 lb/ft) Guide-Rail Bracket Spacing 3118.4.8.2-5 27.5 kg/m (18.5 lb/ft) Guide-Rail Bracket Spacing 3128.4.8.2-6 33.5 kg/m (22.5 lb/ft) Guide-Rail Bracket Spacing 3138.4.8.2-7 44.5 kg/

35、m (30 lb/ft) Guide-Rail Bracket Spacing 3148.4.8.2-8 Car and Counterweight Load Factor 3158.4.8.9 Guide-Rail Axes . 3198.4.10.1.1 Earthquake Elevator Equipment Requirements DiagrammaticRepresentation 3208.4.10.1.3 Earthquake Emergency Operation Diagrammatic Representation 3228.5.1 Balustrade Handrai

36、l Force 3328.6.8.15.19(e) . 353Tables2.4.2.2 Minimum Bottom Runby for Counterweight Elevators With SpringBuffers, Elastomeric Buffers, or Solid Bumpers and RheostaticControl or Single-Speed AC Control 252.15.10.1 Maximum Allowable Stresses in Car Frame and Platform Membersand Connections, for Steels

37、 Specified in 2.15.6.2.1 and 2.15.6.2.2 . 702.16.1.1 Maximum Inside Net Platform Areas for the Various Rated Loads . 712.17.3 Maximum and Minimum Stopping Distances for Type B Car SafetiesWith Rated Load and Type B Counterweight Safeties . 762.18.2.1 Maximum Car Speeds at Which Speed Governor Trips

38、and GovernorOverspeed Switch Operates 792.18.7.4 Multiplier for Determining Governor Sheave Pitch Diameter 812.20.3 Minimum Factors of Safety for Suspension Members 842.20.9.4.5 Relation of Rope Diameter to Diameter of the Small Socket Hole 882.22.3.1 Minimum Spring Buffer Strokes 932.22.4.1 Minimum

39、 Oil Buffer Strokes . 952.23.3 T-Section Guide-Rail Dimensions . 972.23.4.2 Load Multiplying Factor for Duplex Safeties 1032.23.4.3.1 Guide Rails for Counterweight Without Safeties 1042.23.4.3.3 Intermediate Tie Brackets 1042.23.7.2.1 Minimum Thickness of Fishplates and Minimum Diameter ofFastening

40、Bolts 1052.23.10.2 Minimum Size of Rail-Fastening Bolts 1052.26.4.3.2 SIL for Electrical Protective Devices and Other Electrical SafetyFunctions . 1192.26.12.1 Symbol Identification 1244.1.18.1 Maximum and Minimum Stopping Distances for Rack-and-PinionSafeties With Rated Load 1645.1.14.2 Minimum and

41、 Maximum Stopping Distances at Given Angles FromHorizontal . 1785.1.17.2 Spring Buffer Stroke . 1785.1.17.4.4 Minimum Oil Buffer Strokes at Given Angle From Horizontal . 1796.2.3.7 Treadway Width . 2386.2.4 Treadway Speed . 2407.2.6.4 Factors of Safety for Wire Rope and Chains . 2547.2.8.1 Minimum S

42、pring Buffer Strokes 2547.2.8.2 Minimum Oil Buffer Strokes . 2557.4.3 Type B Material Lifts . 2597.9.2.14 Minimum Spring Buffer Strokes 2717.9.2.15 Minimum Oil Buffer Strokes . 272vi8.4.8.7 Stresses and Deflections of Guide-Rail Brackets and Supports . 3178.4.10.1.1 Visual Indication Matrix . 3218.4

43、.11.13 Pipe Support Spacing 3258.4.12.2.2 Maximum Allowable Deflection 3298.5.5 Component-Based Allowable Design Stresses . 3338.6.4.20.4 Brake Test Loads . 345Nonmandatory AppendicesA Control System 413B Unlocking Zone 415C Location of Top Emergency Exit 416D Rated Load and Capacity Plates for Pass

44、enger Elevators 417E Elevator Requirements for Persons With Physical Disabilities inJurisdictions Enforcing NBCC 418F Ascending Car Overspeed and Unintended Car MovementProtection . 426G Top-of-Car Clearance . 430H Private Residence Elevator Guarding (5.3.1.6.2) 435I Escalator and Moving Walk Diagra

45、ms 436J Relationship of Pit Ladder to Hoistway Door Unlocking Means . 443K Beveling and Clearance Requirements (7.4.7.4) 444L Index of Alteration Requirements for Electric Elevators, HydraulicElevators, Escalators, and Moving Walks . 445M Inertia Application for Type A Safety Device Location of Test

46、 Weight8.10.2.2.2(ii)(2) 450N Recommended Inspection and Test Intervals in “Months” . 451P Plunger Gripper Stopping Distances 459Q Explanatory Figures for the Definitions of Elevator Machinery Space,Machine Room, Control Space, Control Room, Remote MachineRoom, or Remote Control Room . 460R Inspecti

47、on Operation and Hoistway Access Switch OperationHierarchy . 463S Vertically Sliding Doors Illustrations of Detection Zones (2.13.3.4) 465T Deleted 478U Design Requirements Traction Elevator Suspension System . 479V Building Features for Occupant Evacuation Operation . 480W Deleted 482X Acceptance T

48、ests . 483Y Maintenance Control Program Records . 487Z Mass and Closing Time of Horizontally Sliding Elevator Doors 490Index 491vii(16) ASME FOREWORDThe first edition of this Code was published inJanuary 1921. It was prepared by an American Societyof Mechanical Engineers (ASME) Committee onProtectio

49、n of Industrial Workers with the assistance ofrepresentativesofanumberofinterestsincludingmanu-facturers, insurance carriers, regulatory bodies, andtechnical societies.Subsequently, ASME requested the AmericanEngineering Standards Committee (AESC) to authorizethe organization of a Sectional Committee to undertakethis revision. They acted favorably on this request andin January 1922 assigned sponsorship for the projectjointly to the American Institute of Architects, theNational Bureau of Standards, and ASME, all three ofwhom had taken an active part in the preparation ofthe first edit