ARP 11071-1-2008 Comparison of worldwide lift safety standards Part 1 Electric lifts (elevators)《世界范围升降机安全标准比较 第1部分 电梯》.pdf

《ARP 11071-1-2008 Comparison of worldwide lift safety standards Part 1 Electric lifts (elevators)《世界范围升降机安全标准比较 第1部分 电梯》.pdf》由会员分享，可在线阅读，更多相关《ARP 11071-1-2008 Comparison of worldwide lift safety standards Part 1 Electric lifts (elevators)《世界范围升降机安全标准比较 第1部分 电梯》.pdf（74页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21020-5 ARP 11071-1:2008 Edition 1 ISO/TR 11071-1:2004 Edition 2STANDARDS SOUTH AFRICA Recommended practice Comparison of worldwide lift s

4、afety standards Part 1: Electric lifts (elevators) This recommended practice is the identical implementation of ISO/TR 11071-1:2004 and is adopted with the permission of the International Organization for Standardization. This document does not have the status of a South African National Standard. P

5、ublished by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa This standard may only be used and printed by approved subscription and freemailing clients of the SABS

6、.ARP 11071-1:2008 Edition 1 ISO/TR 11071-1:2004 Edition 2 Table of changes Change No. Date Scope National foreword This recommended practice was approved by National Committee StanSA TC 5120.50, Lifts, escalators and passenger conveyors, in accordance with procedures of Standards South Africa, in co

7、mpliance with annex 3 of the WTO/TBT agreement. This document was published in February 2008. This standard may only be used and printed by approved subscription and freemailing clients of the SABS. Reference number ISO/TR 11071-1:2004(E) ISO 2004TECHNICAL REPORT ISO/TR 11071-1 Second edition 2004-0

8、7-15 Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators) Comparaison des normes mondiales de scurit des ascenseurs Partie 1: Ascenseurs lectriques ARP 11071-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/

9、TR 11071-1:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In down

10、loading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the

11、 General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address

12、given below. ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs mem

13、ber body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2004 All rights reservedARP 11071-1:2008This standard may only be used and printed by

14、approved subscription and freemailing clients of the SABS.ISO/TR 11071-1:2004(E) ISO 2004 All rights reserved iiiContents Page Foreword. v Introduction to the first edition (1990) vi Introduction to this edition. vi 1 Scope 1 2 Terminology. 2 2.1 Lifts and elevators 2 2.2 Electrical safety devices a

15、nd electrical protective devices 3 2.3 Safety gear and safeties. 4 2.4 Other terms 4 3 Basis for lift safety standards development (basic assumptions) 4 3.1 Historical background 4 3.2 General. 6 3.3 Assumption 1 safe operation assured to 125 % of rated load 6 3.4 Assumption 2 failure of electrical

16、safety devices. 8 3.5 Assumption 3 failure of mechanical devices 10 3.6 Assumption 4 imprudent acts by users. 12 3.7 Assumption 5 neutralization of safety devices during servicing . 12 3.8 Assumption 6 car speed linked to frequency of mains . 14 3.9 Assumption 7chorizontal forces exerted by a person

17、 14 3.10 Assumption 8 retardation 16 4 Spaces and clearances. 18 4.1 Historical background 18 4.2 Observations and suggestions by individual experts 21 4.3 Point agreed upon. 22 5 Door systems and interlocks. 22 5.1 Historical background 22 5.2 Observations and suggestions by individual experts 24 5

18、.3 Points agreed upon. 24 6 Kinetic energy . 26 6.1 Historical background 26 6.2 Observations and suggestions by individual experts 32 6.3 Points agreed upon. 32 7 Traction calculations 34 7.1 Historical background 34 7.2 Observations and suggestions by individual experts 34 7.3 Points agreed upon.

19、37 8 Safety gear. 38 8.1 Historical background 38 8.2 Observations and suggestions by individual experts 38 8.3 Points agreed upon. 40 9 Overspeed governors . 40 9.1 Historical background 40 9.2 Observations and suggestions by individual experts 40 9.3 Points agreed upon. 42 10 Buffers 42 10.1 Histo

20、rical background 42 ARP 11071-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 11071-1:2004(E) iv ISO 2004 All rights reserved10.2 Observations and suggestions by individual experts.44 10.3 Points agreed upon.46 11 Braking systems46

21、 11.1 Historical background 46 11.2 Observations and suggestions by individual experts.46 11.3 Points agreed upon.48 12 Electrical devices 48 12.1 Historical background 48 12.2 Observations and suggestions by individual experts.50 12.3 Points agreed upon.52 Annex A (normative) Tabulations .54 Annex

22、B (informative) References 105 Annex C (informative) CEN/TC 10/WG 1 Document N144E 107 ARP 11071-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 11071-1:2004(E) ISO 2004 All rights reserved vForeword ISO (the International Organiza

23、tion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established

24、has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. In

25、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publi

26、cation as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for exam

27、ple), it may decide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn to the possibi

28、lity that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TR 11071-1 was prepared by Technical Committee ISO/TC 178, Lifts, escalators and moving walks. This second edition cancels and rep

29、laces the first edition (ISO/TR 11071-1:1990), which has been updated. It also incorporates the Amendments ISO/TR 11071-1:1990/Amd.1:1999, References to Japanese standards, and ISO/TR 11071-1:1990/Amd.2:2001, References to Australian standards. ISO/TR 11071 consists of the following parts, under the

30、 general title Comparison of worldwide lift safety standards: Part 1: Electric lifts (elevators) Part 2: Hydraulic lifts (elevators) ARP 11071-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 11071-1:2004(E) vi ISO 2004 All rights r

31、eservedIntroduction to the first edition (1990) At the 1981 plenary meeting of ISO/TC 178, work began on a comparison of CEN standard EN 81-1 with the American, Canadian, and USSR safety codes. In 1983, Working Group 4 was officially formed to carry out the task of preparing a cross reference betwee

32、n the relevant sections of these standards and to analyze the differences on selected subjects. The goal at that time was to prepare a technical report which would provide reference information to assist national committees when reviewing and revising individual standards which may initiate gradual

33、convergence of the technical requirements. In 1984, the study was expanded to include the CMEA safety standard. The content of this report is based on the information provided by the WG 4 members. The information which could not be obtained on the CMEA standard at the time of publication is noted in

34、 the report by a “?” in some of the tables. This report is intended to aid standards writers in developing their safety requirements, and to help standards users understand the basis for the requirements as they are applied throughout the world. This report is not intended to replace existing safety

35、 standards. Conclusions are arrived at in some cases, but only where there is unanimity amongst the various experts. In other cases, the reasons for the divergent views are expressed. This report must be read in conjunction with the various safety standards, as it was often necessary to summarize th

36、e requirements for the sake of clarifying the comparisons. Further, the information contained in this report does not necessarily represent the opinions of the standards writing organizations responsible for the development of the safety standards which are being compared, and they should be consult

37、ed regarding interpretations of their requirements (see Annex B). Introduction to this edition Since the original publication of this Technical Report in 1990, each standard compared therein has been revised or amended. The recommendations in the form of “agreed upon points” stated in the original r

38、eport have also affected the revisions of the national standards. Furthermore, since 1990 two amendments to the original report have been published: Amendment 1: References to Japanese standards (1999-04-15); and Amendment 2: References to Australian standards (2001-07-15). The original report and a

39、mendments have been widely used by the lift industry and standards writing organizations, including ISO/TC 178. Users have expressed the need for an updated and consolidated version of the document, in particular the comparison tabulations. In response, with Resolution 208/2002, ISO/TC 178 requested

40、 WG4 “to update comparison tables in ISO/TR 11071 with data from the most recent published standards for lifts, and to republish both documents, Part 1 and Part 2, with updated tables and with minimum changes to the narrative sections”. The narrative sections of the original publication, in particul

41、ar the assumptions, historical background, observations and suggestions as well as the points agreed upon, were the result of extensive work by ISO/TC 178 Working group 4. ISO/TC 178 is currently working on a new series of ISO documents under the general title “Safety requirements for lifts (elevato

42、rs)”. In that process, the updated comparison tables are being used as a reference. Extensive work on a complete re-write of the narrative sections is not deemed necessary. However, republication of the text with only minor editorial changes would help readers to understand the background to the saf

43、ety concerns being addressed in the current national standards for lifts. To clarify the scope of the revisions to the narrative sections or clauses, and to minimize inconsistencies between the data in the tables and in the narrative parts, “NOTES” have been inserted. ARP 11071-1:2008This standard m

44、ay only be used and printed by approved subscription and freemailing clients of the SABS.TECHNICAL REPORT ISO/TR 11071-1:2004(E) ISO 2004 All rights reserved 1Comparison of worldwide lift safety standards Part 1: Electric lifts (elevators) 1 Scope This Technical Report consists of a comparison of th

45、e requirements of selected topics as covered by the following worldwide safety standards (excluding regional or national deviations): a) CEN European Standard EN 81-1:1998, Safety rules for the construction and installation of lifts Part 1: Electric lifts; b) ASME A17.1-2000 and CSA B44-00, Safety C

46、ode for elevators and escalators; c) Building Standard Law of Japan Enforcement order Section 2, Elevator equipment, Articles 129-3 to 129-13, as well as year 2000 Ministry of Construction notices: Nos. 1413 up to and including 1418; Nos. 1423, 1424, 1428 and 1429; No. 1597; d) AS1735.1-2001, Lifts,

47、 escalators and moving walks Part 1: General requirements, and AS1735.2-2001, Lifts, escalators and moving walks Part 2: Passenger and goods lifts Electric. NOTE 1 The following standards were compared in the original (1990) publication: CEN EN 81 Part 1:1985; ASME/ANSI A17.1 (1987 edition plus the

48、A17.a-1988 and A17.1b-1989 addenda); CSA/CAN3-B44 (1985 edition plus Supplement 1 1987); USSR Elevator design and safe operation code (Edition NEDRA, 1971); CMEA Elevator Safety Regulations of the Council for Mutual Economic Assistance. NOTE 2 Since the 1990 edition: the ASME and CSA standards have

49、been harmonized with insignificant deviations, therefore shown in a single tabulation column; the USSR and CMEA standards have been withdrawn following the political change to the former Soviet Union and East Block; in Russia, the PUBEL document has been issued, which is currently undergoing major revisions; therefore, all related references to USSR and CEMA have been removed in this edition and no new data for the Russian Federation have been introduced. ARP 11071-1:2008This standa