ARMY MIL-F-44251 A-1990 FRAME SECTIONS TENT EXTENDABLE MODULAR PERSONNEL (TEMPER)《模块人员可伸长帐篷架(回火)》.pdf
《ARMY MIL-F-44251 A-1990 FRAME SECTIONS TENT EXTENDABLE MODULAR PERSONNEL (TEMPER)《模块人员可伸长帐篷架(回火)》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-F-44251 A-1990 FRAME SECTIONS TENT EXTENDABLE MODULAR PERSONNEL (TEMPER)《模块人员可伸长帐篷架(回火)》.pdf(19页珍藏版)》请在麦多课文档分享上搜索。
1、MIL-F-4425LA 83 7777706 0437478 L I INCH-POUND MIL-F-4425 1 A 20 February 1990 SUPERSEDING MIL-F-44251 20 November 1986 MILITARY SPECIFICATION FRAME SECTIONS, TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER) This specification is approved for use by all Departments and Agencies of the Department of Def
2、ense. 1. SCOPE 1.1 Scope. This specification covers the frame sections of an extendable frame type personnel modular tent with covers. 1.2 Classification. The frame sections shall be of the following types and classes as specified (see 6.2): Type I - Frame end section Type II - Frame extendable sect
3、ion Type III - Frame extendable door section Class 1 - Frame sections supplied with folding arch assemblies which Class 2 - Frame sections supplied with sectionalized folding arch allow a wrapped length of 113 inches. assemblies which allow a wrapped length of 98 inches 2. APPLICABLE DOCUMENTS 2.1 G
4、overnment documents. 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defens
5、e Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: U.S. Army Natick Research, Developme
6、nt, and Engineering Center, Natick, MA 01760-5014 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC NIA FSC 8340 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided
7、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. I- MIL-F-qLIZSLA 3 - 9797906 OL1L7q99 3 - MIL-F-442 5 1 A SPECIFICATIONS FEDERAL DDD-L-20 - Label: For Clothing, Equipage, and Tentage, (General PPP-B-60 1 - Boxes, Wood, Cleated-Plywood PPP-B-636 - Boxes, Shi
8、pping, Fiberboard PPP-B-640 - Boxes, Fiberboard, Corrugated, Triple-Wal Use) MIL I TARY MIL-C-5541 - Chemical Conversion Coatings on Aluminum and Aluminum i Alloys Res ist ant s MIL-C-46168 - Coating, Aliphatic Polyurethane, Chemical Agent MIL-P-53022 - Primer, Epoxy Coating, Corrosion Inhibiting, L
9、ead and Chromate Free STANDARDS FEDERAL FED-STD-751 - Stitches, Seams, and Stitchings MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by MIL-STD-129 - Marking for Shipment and Storage MIL-STD-130 - Identification Marking of U.S. Military Property Attributes (Unless otherwise ind
10、icated, copies of federal and military specifications, standards, and handbooks are available from the Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2.1.2 Other Government documents, drawings, and publications. The following other Government docume
11、nts, drawings, and publications form a part-of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DRAWINGS (see 6.4) U.S. ARMY NATICK RESEARCH, DEVELOPMENT, AND ENGINEERING CENTER 5-4-3330 - Frame Sections for Tent, Extendable, M
12、odular, Personnel 5-4-3331 - Binding Strap Assembly (TEMPER) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-F-LI425LA 83 W 7777906 0437500 b W MIL-F-4425 1 A 5-4-3332 - Side Arch Assembly 5-4-3333 - Roof Arch Assembly 5-4-3334 - Roof Arch Asse
13、mbly, Ridge Gusset 5-4-3335 - Header Assembly 5-4-3336 - Purlin Assembly 5-4-3337 - Door Sill Assembly 5-4-3338 - Arch Assembly 5-4-3339 - Foot 5-4-3340 - Ridge Extender Assembly 5-4-3341 - Eave Extender Assembly 5-4-3342 - Hitch Pin Clip and Holder 5-4-3343 - Vestibule Frame Assembly 5-4-3344 - Upr
14、ight 5-4-3345 - Header 5-4-3346 - Pin Assembly 5-4-3347 - Frame Sections Cover Assembly 5-4-3358 - Erection Instructions 5-4-4006 - Arch Assembly, Sectionalized 5-4-4007 - Roof Arch Assembly, Ridge Gusset, Sectionalized 5-4-4008 - Roof Arch Assembly, Sectionalized 5 -4-4009 - Connect or 5-4-4154 - P
15、in, Quick Release with Lanyard Assembly 5-4-4155 - Pin, Quick Release 5-4-4156 - Tab 5-4-4157 - Lanyard Assembly (Copies of drawings are available from the U.S. Army Natick Research, Development, and Engineering Center, ATTN: STRNC-EMSS, Natick, MA -01760-5014.) 2.2 Non-Government publications. The
16、following documents form a part of this Unless otherwise specified, the issues document to the extent specified herein. of the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the
17、DODISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) B 633 D 395 - Electrodeposited Coatings of Zinc on Iron and Steel - Standard Practice for Commercial Packaging (Application for copies should be addressed to the American Soc
18、iety for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) (Non-Government standards and other publications are normally available from organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational se
19、rvices.) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- VIL-F-qq25LA 83 W 7797706 04L7501 8 W MIL-F-44251A 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this-doc
20、ument takes precedence. regulations unless a specific exemption has been obtained. Nothing in this document, however, supersedes applicable laws and 3. REQUIREMENTS 3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see 6.31, in accordance wlth 4.3.
21、 3.2 Materials and components. Materials and components shall be as specified herein and on the applicable drawings. Materials not definitely specified shall be of the quality normally used by the contractor provided that the completed item complies with all provisions of this document. It is encour
22、aged that recycled material be used when practical as long as it meets the requirements of this specification. II O 3.2.1 Primer. Primer shall conform to MIL-P-53022. 3.2.2 Coating. Coating shall be camouflage green 383 conforming to MIL-C-46168. 3.2.3 Thread, polyester. Dyed thread shall show color
23、fastness to weathering equal to or better than the standard shade sample. sample is available, the dyed thread shall show “good“ colorfastness to weather- ing. Thread sizes shall be as follows: When no standard shade For all stitching except bartacking and stitching indicated by “Z“ on drawings - Si
24、ze FF or F for needle and bobbin For bartacking - Size E For stitching indicated by “2“ on drawings - Size F for needle, size E for looper 3.2.4 Buckle, double bar with lip. The double bar buckle with lip shall conform to the 1-inch, No. 789 steel Waterbury buckle or equal (see 6.5 and Drawing 5-4-3
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILF44251A1990FRAMESECTIONSTENTEXTENDABLEMODULARPERSONNELTEMPER 模块 人员 伸长 帐篷 回火 PDF
链接地址:http://www.mydoc123.com/p-444637.html