ARMY A-A-50163-1988 CRUETS COMMUNION《圣餐调味瓶》.pdf

《ARMY A-A-50163-1988 CRUETS COMMUNION《圣餐调味瓶》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-50163-1988 CRUETS COMMUNION《圣餐调味瓶》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、t C- 99-35 A-A-5 O 16 3 April 20, 1988 COMMERCIAL ITEM DESCRIPTION CRUETS , COMMUNION The General Services Administration has authorized the use of this commercial item description in preference to Item 2 of MIL-F-43381. 1. SALIENT CHARACTERISTICS 1.1 Design and construction. The glass cruets shall

2、be fabricated of either a lime or a lead flint glass and may be either handmade or machine made. cruets shall have a minimum of 4 ounce capacity and shall measure approximately 4 inches from the base to the top of the cruet without the stopper. shall be all glass and measure approximately 2 inches i

3、n height. The cruets shall include an all glass handle which is consistent with standard commercial practice. All glass surfaces and edges shall be free from defects. The design of the cruets may be specified by the procuring activity. The cruets shall be procured in pairs. The The stopper 2. QUALIT

4、Y ASSURANCE 2.1 Certification, The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same as the product offered for sale in the co

5、mmercial marketplace. When specific quality assurance provisions are specified for any commercial charac- teristic the contractor shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. reserves the right to require proof of such conforman

6、ce prior to first delivery an thereafter as may be otherwise provided for under the provisions of the contract. 3. PACKAGING -e The Government 3.1 Packaging. Each pair of cruets, with stoppers, shall be wrapped in flexible cellular plastic film (bubble pack) or at least two thicknesses of tissue pap

7、er. fiberboard box. Cushioning shall be applied, as necesssry, to immobilize the cruets and fill voids in the box. Each pair of wrapped cruets shall be placed in a snug-fitting FSC 9925 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. THIS DOCUMENT CONTAINS 2 PAGES.

8、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-5 O 163 3.2 Packing. Forty-eight cruets (twenty-four pair), packaged as specified, shall be packed in a snug-fitting shipping container conforming to style RSC, type CF, (variety SW) or SF, class d

9、omestic, grade 275 of PPP-B-634. The shipping container shall be completely filled with no voids and of a size that can be palletized in accordance with MIL-STD-147. Each chipping container shall be closed in accordance with the appendix of PPP-E-636. 3.3 Palletization, 4-way entry pallet in accorda

10、nce with load type Ia of MIL-STD-147. prepared load shall be bonded by means K and L, or O or P, in accordance with MIL-STD-147. When specified (see 4.21, :cruets shall be palletized on a Each 3.4 Marking. purchase order, unit pa&, shipping containers and unitized pallet laads shall be marked in acc

11、ordance with MIL-STD-129. In addition to any special markings required by the contract or 4, NOTES 4.1 Intended use. The cruets described in this document are intended for Chapel use by Army, Navy, and Air Force Chaplains under noncombat conditions. 4.2 Ordering .- data. a. Title, number, and date o

12、f this document. b. When palletization is required (see 3,3). MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Cus todians GSA-FSS Army - GL PREPARING ACTTVITY: Navy - PE Air Force - 28 Army - GL Review activities Project No. 9925-1007 Armed Forces Chaplians Board DLA - GS 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-