ARMY A-A-50097 A-1990 PULLEY MOUNTAIN RESCUE《山间救护滑轮》.pdf

《ARMY A-A-50097 A-1990 PULLEY MOUNTAIN RESCUE《山间救护滑轮》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-50097 A-1990 PULLEY MOUNTAIN RESCUE《山间救护滑轮》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-50077A 30 7777774 0052775 O M INCH-POUND 1 February 21, 1990 SUPERSEDING A-A-50097 March 23, 1987 COMMERC I AL I TEM DE S C R I P T I ON PULLEY, MOUNTAIN RESCUE The Geperal Services Administration has authorized the use of this commercial item description. 1. SALIENT CHARACTERISTICS 1.1 Design a

2、nd construction. The mountain rescue pulley shall have split halves that enable the user to put the rope in the pulley without having to thread the rope through the pulley. The pulley sides and wheel shall-be fabricated from aluminum. The center bolt shall have a 3/8 inch diameter shaft fabricated f

3、rom steel. The shaft nut shall have a self-locking nylon insert. The pulley wheel shall have roller bearings and be large enough to accommodate a 1/2 inch diameter rope. The snap link hole shall be large enough to accommodate two snap links. Minimum breaking strength shall be 5000 pounds. Maximum we

4、ight shall be 0.5 pounds. Finish shall be black anodized. The manufacturers identification symbol shall be stamped on each pulley assembly, 2, QUALITY ASSURANCE 2.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient character

5、istics and requirements of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may b

6、e otherwise provided for under the provisions of the contract. 2.2 Visual examination. Each lot of pulleys shall be inspected in accordance with MIL-STD-105. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 4.0. The lo

7、t size shall be expressed in units of pulleys. The sample unit shall be one pulley. The pulleys shall be examined for the defects listed below: Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Commander,

8、U.S. Army Natick Research, Development, and Engineering Center, Natick, MA 01760-5014. AMSC N/A FSC 3020 DISTRIBUTION STATEMENT. Approved for public release, distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- _- - - -_ A-A-50

9、097A 30 7779774 0052776 2 Finish not smooth and adherent; not free of burrs, rough spots, sharp edges, slivers, flat areas or projections; any component missing or not specified type; any component fractured, split, dented, bowed, malformed, damaged or loose; shaft nut turns freely on the bolt; all

10、other parts do not rotate freely through 360 degrees rotation; markings in wrong location, incomplete, illegible, incomplete, or not as specified, 2.3 Dimensional examination. The pulleys shall be examined without damaging or disassembling the pulleys. Any dimension not within the specified toleranc

11、es shall be classified as a defect. The lot size shall be expressed in units of pulleys. The sample unit shall be one pulley. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 2.5. 3. PACKAGING 3.1 Packaging. Each pulley shall be completely wrap

12、ped in kraft paper. Eight wrapped pulleys shall then be packed in a snug-fitting intermediate fiberboard box fabricated from 200-pound test corrugated fiberboard. 3.2 Packing. Eighty pulleys, packaged as specified, shall be packed in a snug- fitting fiberboard shipping container conforming to style

13、RSC, type CF, class domestic, grade 275 of PPP-B-636. The shipping container shall be completely filled with no voids and be of a size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be closed in accordance with the appendix of PPP-B-636. 3.3 Palletization. When

14、specified (see 4.2), pulleys packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means C and D, or film bonding means F or G, in accordance wit

15、h MIL-STD-147. 3.4 Marking. In addition to any special markings required by the contractor or purchase order, unit packs, shipping containers, and palletized unit loads shall be marked in accordance with MIL-STD-129, 4. NOTES 4.1 emergency personnel rescue. 4.2 Ordering data. Acquisition documents s

16、hould specify the following: Intended use, The mountain pulley is used for hauling equipment and a. Title, number, and date of this document. b. When palletization is required (see 3.3). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50077A 30

17、 7777774 0052-777 4 M MIL I TARY INTERESTS : I I A-A-50097A 4.3 Sources of documents, 4.3.1 are available from: Source of government documents. Copies of military and Federal documents Standardization Documents Order Desk Bldg. 4D, 700 Robbins Avenue Philadelphia, PA 19111-5094 Custodians Army - GL Air Force - 99 Review Activities Air Force - 82 DLA - CT User Activity Navy - MC CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: Army - GL (Project 3020-0121) 3 .- -. _-. . e .- _- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-