AIR FORCE MIL-J-87251-1988 JACKET WOMAN'S LIGHTWEIGHT WITH REMOVABLE LINER《轻质有可拆卸衬垫的女式外套》.pdf

《AIR FORCE MIL-J-87251-1988 JACKET WOMAN'S LIGHTWEIGHT WITH REMOVABLE LINER《轻质有可拆卸衬垫的女式外套》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE MIL-J-87251-1988 JACKET WOMAN'S LIGHTWEIGHT WITH REMOVABLE LINER《轻质有可拆卸衬垫的女式外套》.pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、3“. MIL-J-87251 (USAF) 4 Noveniber 1988 SUPwmI - (See Section 6) MILITARY SPECIFICATION JACKET, WWS: LImIGIiT WITH RE?v)VABLE LINER . This specification i8 approved for use by the Department of the Air Force and is available for use by all Departments and Agencies of the Department of Defense. 1. SC

2、OPE . - 1.1 Scope. This specification- covers r6-m lightwight jacket with I remvable liner. 1.2 Classification. The jacket shall be of one type furnished in the following lengths and sizes, as specified (see 6.2): Schedule of lengths and sizes Short 68 10 12 14 16 18 Regular 6 8 10 12 14 16 18 20 22

3、 Long 68 10 12 14 16 18 20 22 10 12 14 16 18 20 22 Extra long 8 7 Beneficial comnents (recomndations, additions, deletions) and any pertinent data which may be of use in inproving this document should be addres$ed to: using the self-addressed Standardization Document Inprovernent boposal (DD Form 14

4、26) appearing at the end of this document or by letter. ASD/ENES, Wright-Patterson AFB OH 45433-6503, by AMSC N/A FSC 8410 DISTRIBUTION STATEMENT A: unlimited. Approved for public release, distribution is . I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

5、HS-,-,-MIL-J-87251 84 m 79777Ob 044b52b 4 m ? /- / MIL-J-87251 (USAFI # i 2. APPLICABLE DOCUMENTS 2.1 Qovernmnt documents 2.1.1 Specifications, standards, and handbooks. The fol lowing specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherw

6、ise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the Qolicitation (see SPECIFICATIONS FEDERAL A-A- 1696 A-A-50083 V-B-87 1 V-F- 106 V-T-276 V-T-280 NN-P-7 1 DDD-L- 2

7、0 PPP-B-60 1 PPP-B.-636 MLITAFtY MIL-P- 116 MIL-c-3735 MIL-C-10176 MIL-P- 150 1 1 MIL-F-21840 MIL-C-21852 MIL-T-43548 MIL-C-43718 MCL-(3-44192 MIL-C-44296 STANDARDS FED-STD- 19 1 FED-STD-751 6.2). Bag, Plastic (Garment) Bag, Plastic, Folded Garment Button, Sewing Hole, and Button, Staple, (Plastic)

8、Fasteners, Slide, Interlocking Thread, Cotton Thread, Gimp, Cotton, Buttonhole Pallets, Material Handling, Wod, Stringer Construction, 2-Way and 4-Way (Partial) Label: For Clothing, Equipage, and Tentage, (General Use 1 Boxes, Wod, Cleated Plywood Boxes, Shipping, Fiberboard Preservation, Methods of

9、 Cuffs, Knit, Wrist and Ankle, and Cloth, Knitted Cloth, Gabardine: Wol, Polyester and Wo1 Pallets, Material Handling, Wood Post Construction, 4-k Entry Fastener Tapes, Hook and Pile, Synthetic Cloth, Taffeta, Nylon Thread, Polyester Core: Cotton-, Rayon-. or Po Lyes ter-Covered Cloth, Polyester; Po

10、lyester and Cotton; Polyester and Rayon, for Pockets Container, Shipping and Storage, Coat (Hanger Pack) Cloth, Fusibles Textile Test Methods Stitches, Seams, and Stitchings 2 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I E f MILITARY MIL-STD-1

11、05 MIL-STD-129 MIL-STD- 147 Palletized Unit Loads *MIL-STD-2073- 1 Sampling Procedures and Tables for Inspection by Attributes . Marking for Shipment and Storage DoD Materiel Procedures for Development and Application of Packaging Requirements (Unless otherwise indicated, copies of federal and milit

12、ary specifications, standards, and handbooks are available from the Naval Publications and Form Center, (Am: NPODS) , 5801 Tabor Ave. , Philadelphia PA 19120-5099. 2.1.2 Other Government documents, drawings, and oublications. The fol lowing other Government doctnnents, drawings, and publications for

13、m a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. LAM AND FEGLATIONS Rules and Regulations Under the Wo1 Products Labeling Act of 1939 (Application for copies should be addressed to the Superintendent of Documents, U

14、.S. Government Frinting Office, Washington DC 20402-0001.) 2.2 Non-Government Dublications. The following docirments form a part of this document to the extent specified herein. the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. t

15、he issues of documents not listed in the DoDISS are the issues of the documents cited in the solicitation. Unless otherwise specified, Unless otherwise specified, ATBRICAN SOCIEXY FOR TESTING AND MATERIALS USl“Ml ASTM D 3951 Standard Practice for Comercial Packaging (DoD adopted) (Application for co

16、pies should be addressed to the American Society for Testing and Materials, 1916 Race St., Philadelphia PA 19103-1187.) THE COLOR ASSOCIATION OF THE UNITED STATES Department of Defense (DoD) Standard Color Card of Official Standardized Shades for Sewing Threads Department of Defense (DoD) Standard S

17、hades for Buttons (Application for copies should be addressed to The Color Association of the United States, 343 Lexington Ave., New York NY 10016-0927.) (Non-Government standards and other publications are normal ly available from the organizations that prepare or distribute the documents. may be a

18、vailable in or through libraries or other informational services.) These documents also I 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-J-87251 84 W 7777906 0446528 8 W MIL-J-87251 (USAF) I 2.3 Order of Drecedence. In the event of a conflict

19、between the text of this document and the references cited herein, the text of this document shall take precedence. applicable law and regulations unless a specific exemption has been obtained. Nothing in this document, however, supersedes 3. mQUIREMEXIS 3.1 First article. to first article inspectio

20、n (see 6.4) in accordance with 4.3. When specified (see 6.21, 4 sample shall be subjected 3.2 Guide samples. Samples, when furnished (see 6.3); are solely for guidance and information to the contractor. Variations from the document may appear in the sample, in which case the document shall govern. 3

21、.3 fiterials (see 6.5) 3.3.1 Basic material. The basic fabric shall be polyester/wol gabardine, USAF Color Blue, Shade No. 1605, conforming to type II, class 12 of MIL-C-10176. The fabric shall have a durable water resistant finish (see . 3.3.1. i). _. 3,3.1.1 Spray ratina. The results of three indi

22、vidual determinations on the sample unit for spray rating shall be equal to or better than ratings 90, 90, 90 initial and 80, 80, 80 after 1 dry cleaning (see 4.4.1.1). 3.3.2 Lining The material for lining the sleeves and body, and the liner outershell shall be nylon taffeta cloth conforming to type

23、 IV of MIL-C-21852 and shall be USN Color Blue, Shade No. 3376. n 3.3.3 InsulatinR cloth. Thinsulate Style CS100 having a minimum weight of 3.0 (excluding scrim) ounces per square yard and a minimum thickness of 0.3 or Thermlite T-O having a minim weight of 3.0 ounces per square yard and a minimum t

24、hickness of 0.3 (see 6.6). Lightwight jacket manufacturers shall submit a certificate of compliance stating that the batting insulation conforms to requirements specified for applicable types, class, and style (see 4.4.1.1). The insulating cloth for the liner shall be 3.3.4 Fastener tapeg. The hook

25、and loop pile fastener tapes for attaching the liner to the jacket shall be 1 inch wide by 1-1/2 inches long and shall be Black 3230 conforming to type I or type IA, class 1 of MIL-F-21840. 3.3.5 Interlining. The fusible cloth interlining for the pocket welts, collar, collarstand and shoulder loops

26、shall conform to type V, class 2, style A of MIL-C-44296. The colaor shall be charcoal gray or black. 3.3.6 Bias binding. The edges of the liner shall be bound with a nylon bias-cut binding. The binding shall be 314 to 7/8 inch wide. The color shall match the nylon taffeta lining used to cover the i

27、nsulating cloth. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL- 5-8725 1 (USAFI 3.3.7 Pocketing. The material for the pocketing shall conform to class 1 of MIL-C-43718. The color shall be black. 3.3.8 Knitted wrist cuffs. The knitted wrist cu

28、ffs for the sleeves shall conform to type III of MIL-C-3735 and shall be dyed to match USAF Color Blue, Shade No. 1606. 3.3.9 Labels Each jacket, outershell and liner, shall have a size label and a combination personal identification, identification and instruction label conforming to DDD-L-20. requ

29、iremnts of DDD-L-20 shall apply to the jacket outershell label. The colorfastness to dry cleaning 3.3-9.1 Size label. The size label for the jacket outershell and liner shall conform to type VI, class 2. lang and extra long) of the jacket may be abbreviated as follows: 8S, 8R, 8L, and 8XL. The sizes

30、 and lengths (short, regular, 3.3.9.2 Ca tion label. The combination personal identification, identification and instruction label shall conform- to type VI, classes 10 and 15 and chal 1 include the following information: a. Jacket outershell: Ne: Service No.: Jacket, Worns: Lightweight with Remvabl

31、e Liner Contract No.: DLA-100-00-0-0000 (Example) 1/ Wool Products Labeling Act information as applicable L/ Contractor: 1/ DRY CLEAN ONLY b. Jacket liner: Name: Service No.: Jacket, Womans: Lightweight with Remvable Liner Contract No.: DLA-100-00-0-0000 (Example) L/ Contractor: 1/ DRY CLEAN - NOT S

32、TEAM PRESS . OR Machine wash, delicate cycle. Tumble dry, low heat. D NOT STEAM PRESS - 1/ Contractor shall include the applicable informtion. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-J-725L 4 = 7777906 0446530 6 = MIL-J-87251 (USAFI 3.3

33、.10 Slide fastener. The slide fastener for the front closure shall conform to type IV, style 8, size M of V-F-106. . The chain shall be brass or aluminum with a short tab pul 1. The tape shall be cotton/warp and nylon filling, cotton, or polyester and shall be dyed to approximate the shade of the ba

34、sic fabric. The metal components shall have a black chemical finish. All metal components shall be from the same contractor. 3.3.11 Button. The button for the collar closure shall conform to type II, class D, style 20 or 21, size 24 line of V-B-871 and shall be DoD Shade Blue BU, C.A. 62002 (see DoD

35、 Standard Shades for Buttons). 3.3.12 Thread. The thread for seaming, stitching, buttonhole making and bartacks shall conform to type IA3, ticket No. 50 or No. 60, 3 ply of V-T-276 or to cotton-covered or rayon-covered polyester thread, ticket No. 50, 2 or 3 ply conforming to MIL-T-43548. The thread

36、 for sewing on the button shall conform to type IA3, ticket No. 20, 4 ply of V-T-276. The color shall be DoD Shade Blue AB, C.A. 66044 (see DoD Color Card) and shall have good colorfastness to wet dry cleaning. 3.3.13 Gim. The gimp for reinforcing the buttonhole shall conform to . type I or type II,

37、 size No. 8 of V-T-280 and shall be DoD Shade Blue AB, C.A. 66044 (see DoD Color Card). The dyed gimp shall have colorfastness to . wet dry cleaning equal to or better than the standard sample (see 6.3). If a standard sample is not available, the dyed gimp shall have good colorfastness to wet dry cl

38、eaning. 3.4 Design. The jacket shall be single breasted with a covered slide fastener front closure, collar and collarstand with a throat tab that buttons, tm slash pockets, hanger loop, set-in sleeves with knitted cuffs, straight bottom, and an epaulet on each shoulder. The jacket shall have a remo

39、vable liner attached with hook and loop pile fastener tapes. 3.5 Patterns. Standard patterns will be furnished by the Government and provide a seam allowance of 112 inch for side seams, sleeve seams, knit cuffs, and shoulder sem; 3/8 inch for armholes and joining the collarstand to the body; and 1/4

40、 inch for the collar and stand extension, The standard patterns shall not be altered in any way, and are to be used as a guide for cutting the contractors mrking patterns. The standard patterns show size, seamallowance, directional lines for cutting, and are mrked or notched for proper placement and

41、 asembly of the component parts. The mrking patterns shall be identical to the standard patterns. 3.5.1 Pattern Darts. The components of the jacket and liner shall be cut fromthe niaterials specified in accordance with the number of pattern parts indicated in table I. 3.6 Construction. The jacket sh

42、all be constructed in accordance with table II and herein. The thread and the fabric shall not be lubricated by any means prior to or during the seaming. Figures are furnished for guidance and informtion only. If there are any inconsistencies between the specification and the figures, the specificat

43、ion shall govern. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-J-87251 84 7799706 04LIb53L Abt er ia1 MIL-J-87251 (USAF) TABLE I. List of wttern parts. Basic rnaterial (see 3.3.1) Lining (see 3.3.2) Liner (see 3.3.2) Insulating cloth (see 3.3.

44、3) Fusible interlining (see 3.3.5) Pol yes ter (see 3.3.7) .- Pattern nomenclature Front Back Front facing Topsleeve Undersleeve Shoulder loop Pocket wsl t Pocket facing Col lar Collarstand Back neck facing Front Back Tops 1 eeve Undersleeve Front Back Front Back Col lar Collarstand Pocket ve1 t Sho

45、ulder loops Front edge reinforcement Pocket Cut parts 2 1 2 2 2 4 2 2 2 2 1 4 2 2 1 4 3.6.1 Stitches, seam, and stitchinffs. All stitch, seam, and stitching types Specified in table II shall conform to FED-STD-751. Whenever tm or more methods of seam or stitch types are specified for the same operat

46、ion, any one of themmy be used. 3.6.1.1 Stitches Der .inch. The number of stitches per inch specified in table II shall be interpreted to be the minimum and the mximum number of stitches per inch permitted. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

47、HS-,-,-MIL-J-725L 4 9799906 044b532 T = MIL-J-87251 (USAF) 3.6.1.2 Thread breaks and ends of seam and stitchings. The ends of all seams and stitchings produced with stitch type 301, fien not caught in other seam or stitchings, shall be backstitched not less than 1/4 inch. Thread breaks (al1 stitch t

48、ypes) shall be secured by stitching back of break 1/2 to 1 inch. For those sew with thread breaks, utilizing stitch type 401, a 301 stitch shall be used to secure thread breaks by stitching back of break 1/2 to 1 inch. . 3.6.1.3 Repairs of type 301 stitching. Repairs of type 301 stitching shall be a

49、s follow: a. When thread breaks, skipped stitches, run-Offs, or bobbin runouts occur during sewing, the stitching shall be repaired by superimposing and stitching (see NOTE). - restarting the stitching a minimum of 1/4 inch back of the end of the _y b. Except for prestitching, thread breaks, two or mre consecutive skipped stitches or run-off stitches noted during inspection of the item (in process or end item)