AIR FORCE MIL-J-87250-1988 JACKET MAN'S LIGHTWEIGHT WITH REMOVABLE LINER《轻质有可拆卸衬垫的男式外套》.pdf

《AIR FORCE MIL-J-87250-1988 JACKET MAN'S LIGHTWEIGHT WITH REMOVABLE LINER《轻质有可拆卸衬垫的男式外套》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE MIL-J-87250-1988 JACKET MAN'S LIGHTWEIGHT WITH REMOVABLE LINER《轻质有可拆卸衬垫的男式外套》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-J-87250 8L( 7779706 0411973 3 i INCH-POUND I MIL-J-87250 (USAF) 4 November 1988 SUPERSEDING (See Section 6) MILITARY SPECIFICATION JACKET, MA“ S: LIQITWEIGHT WITH REM3vABLE LINER This specification is approved for use by the Department of the Air Force and is available for use by all Departments

2、 and Agencies of the Department of Defense. . 1. SCOPE 1.1 Scope. This specification covers a mans lightwight jacket with a remvable 1 iner. 1.2 Classification. The jacket shall be of one type furnished in the following lengths and sizes as specified (see 6.2): d Short Schedule of lenpths and sizes

3、34 36 38 40 42 44 46 Regular 34 36 38 40 42 44 46 48 50 Long 34 36 38 40 42 44 46 48 50 Extra Long 36 38 40 42 44 46 48 50 Beneficial comnents (recomnendations, additions, deletions) and any pertinent data cWch may be of use in improving this documnt should be addressed to: ASD/ENES, Wright-Patterso

4、n AFEI OH 45433-6503 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC NIA FSC 8405 DISTRIBZITION STATEMENT A: Approved for public release; distribution is unlimited. :- THIS DOCUMENT CONTAINS gq PAGES; -

5、. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_=_-_- MIL-J-7250 84 W 7777906 04LL774 5 = MIL-J-87250 (USAF) 2, APPLICABLE DOCUMENTS 2.1 Government documents 2.1.1 Specification$, standards. d handbooks. Th following specifications, standards,and

6、ha extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in books form a part of this document to the the solicitation SPECIFICATIONS F

7、EDERAL A-A- 1696 A- A- 50083 V-B-87 1 V-F- 106 V-T-276 V-T-280 NN-P-7 1 DDD-L- 20 PPP-B-60 1 PPP-B-636 MILITARY MIL-P- 116 MIL-C-3735 MIL-C- 10176 MIL-P-15011 MIL-F-21840 MIL-C-21852 MIL-T-43548 MIL-C-43718 MIL-044192 MIL-C-44296 STANDARDS FEDERAL FED-STD-Nl FED-STD-75 1 (see 6.2). Bag, Pla tic (Gar

8、ment) Bag, Plastic, Folded Garment Button, Sewing Hole, and Button, Staple, (Platid Fasteners, Slide, Interlocking Thread, Cotton Thread, Gimp, Cotton, Buttonhole Pallets, Material Handling, Wood, Stringer Construction, 2-Way and 4-Way (Partial) Label: For Clothing, Equipage, and Tentage, (General U

9、se) Boxes, Wood, Cleated Plyuuood Boxes, Shipping, Fiberboard Preservation, hthods of Cuffs, Knit, Wrist and Ankle, and Cloth, Knitted Cloth, Gabardine: Pallets, Material Handling, Wood Post Construction, Fastener Tapes, Hook and Pile, Synthetic Cloth, Taffeta, Nylon Thread, Polyester Core: Cotton-,

10、 Rayon-, or Polyester-Covered Cloth, Polyester; Polyester and Cotton; Polyester and Rayon, for Pockets Container, Shipping and Storage, Coat (Hanger Pack) Cloth, Fusibles Wool, Polyester and Wo1 , i 4-Way Entry Textile Test Methods Stitches, Seams, and Stitchings 2 Provided by IHSNot for ResaleNo re

11、production or networking permitted without license from IHS-,-,-MIL-J-7250 84 9999906 0411995 7 W MIL-J-87250 (USAFI MILITARY MIL-STD-105 . Sampling Procedures and Tables for Inspection by MIL-STD- 129 .hlIL-STD- 147 Palletized Unit Loads MIL-STD-2073-1 Attributes Marking for Shipment and Storage Do

12、D Materiel Procedures for Development and Application of Packaging Requirements (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Naval Publications and Forms Center, (ATIT?: NPODS), 5801 Tabor Ave., Philadelphia PA 19120-5099

13、.) 2.1.2 Other Government documents, drawings, and Dublications. The following other Government docunients, drawings, and publications form a part of this document to the Gxtent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. LAVE AND REEULATIONS Rules a

14、nd Regulations Under the Wo1 Products Labeling Act of 1939 (Application for copies should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington DC 20402-0001.) 2.2 Non-Government publications. The following documents form a part .of this document to the extent

15、specified herein. Unless otherwise specified, the issues of the documents aich are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in the solicitation

16、 (see 6.2). AICERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM D 3951 Standard hactice for Comnercial Packaging (DoD adopted) (Application for copies should be addressed to the American Society for Testing and hterials, 1916 Race St., Philadelphia PA 19103-1187.) THE COLOR ASSOCIATION OF THE UN

17、ITED STATES Department of Defense (DoD) Standard Color Card of Official Standardized Shades for Sewing Threads Department of Defense (DoD) Standard Shades for Buttons (Application for copies should be addressed to The Color Association of the United States, 343 Lexington Ave., New York NY 10016-0927

18、.) (Non-Government standards and other publications are normal ly available from the organizations that prepare or distribute the documents. These docmnts also my be avaiiable in or through libraries or othep informational services.) 3 ,/- Provided by IHSNot for ResaleNo reproduction or networking p

19、ermitted without license from IHS-,-,-MIL-J-87250 (USAFI 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence. Nothing in this document, however, supersedes applicable laws and regulatio

20、ns unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 First article. When specified (see 6.21, a sample shall be subjected to first article inspection (see 6.41 in accordance with 4.3. 3.2 Guide satmles. Samples, when furnished (see 6.31, are solely for guidance and information to th

21、e contractor. Variations from the document niay appear in the sample, in *ich case the document shall govern. 3.3 Materials (see 6.5) 3.3.1 Basic material, The basic fabric shall be polyester/mol gabardine, WAF Color Blue, Shade No. 1605, conforming to type II, class 12 of MIL-C-10176. The fabric sh

22、all have a durable water resistant finish (see 3.3.1.1). 3.3.1.1 Spray ratinq. The results of three individual determinations on the sample unit for spray rating shall be equal to or better than ratings 90, 90, 90 initial and 80, 80, 80 after 1 dry cleaning (see 4.4.1.1). 3.3.2 Lining. The niaterial

23、 for lining the sleeves and body, and the liner outershell shall be nylon taffeta cloth conforming to type IV of MIL-C-21852 and the color shall be USN Color Blue, Shade No. 3376. 3.3.3 Insulating cloth. The insulating cloth for the liner shall be Thinsulate Style CS100 having a minimum wight of 3.0

24、 (excluding scrim) ounces per square yard and a minim thickness of 0.3 or Thermolite T-O having a minimum weight of 3.0 ounces per square yard and a minimum thickness of 0.3 (see 6.6). Lightweight jacket manufacturers shall submit a certificate of compliance stating that the batting insulation confo

25、rms to requirements for applicable types, class, and style (see 4.4.1.1). 3.3.4 Fastener tapes. The hook and loop pile fastener tapes for attaching the liner to the jacket shall be 1 inch wide by 1-112 inches long and shall be Black 3230 conforming to type I or type IA, class 1 of MIL-F-21840. 3.3.5

26、 Interlininq. The fusible cloth for interlining the pocket welts, collar, collarstand, and shoulder loops shall conform to type V, class 2, style A of MIL-C-44296. The color shall be charcoal gray or ,black. 3.3.6 Bias bindin the Mistband wale direction shall be 7-1/4 inches; and the courses directi

27、on shall be as Specified in table II, Operation 1.c. Color Blue, Shade No. 1606. The color shall be USAF 3.3.10 Labels. Each jacket, outershell and liner, shall have a size label and a coxribination personal identification, identification and instruction label conforming to DDD-L-20. The colorfastne

28、ss to dry cleaning requiremnts of DDD-L-20 shall appy to the jacket outershell label. d 3.3.10.1 Size label. The size label for the jacket outershell and liner shall conform to type VI, class 2. The sizes and lengths (short, regular, long and extra long) of the jacket my be abbreviated as follows: 3

29、4S, 34R, 34L, and 34XL. 3.3.10.2 Combination Dersonal identification, identification and instruc- tion label. The coxribination personal identification, identification and instruction label shall conform to type VI, classes 10 and 15 and shall include the fol lowing informtion: a. Jacket outershell:

30、 NEUIIS: Service No. : Jacket, Mans: Lightwight with Removable Liner Contract No.: DLA-100-00-0-0000 (Example) 1/ Wool Products Labeling Act informtion as applicable Contractor: 1/ DRY CLEAN ONLY l/ b. Jacket liner: NUlB: Service No. : Jacket, Ws: Lightweight with Removable Liner Contract No.: DLA-1

31、00-00-0-0000 (Example) L/ Contractor : i / DRY CLEAN - D NOT STEAM PRESS OR 3/8 inch for armholes and joining the collarstand to the body; and 1/4 inch for the collar and stand extension. to be used as a guide for cutting the contractors working patterns. standard patterns show size, seam allowance,

32、 directional lines for cutting, and are marked or notched for proper placement and assembly of the component parts. Standard patterns will be furnished by the Government and The standard patterns shall not be altered in any my, and are The The working patterns shall be identical to the standard patt

33、erns. 3.5.1 Pattern parts. The components of the jacket and liner shall be cut fromthe materials specified in accordance with the number of pattern parts indicated in table I. 3.6 Construction. The jacket shall be constructed in accordance with table II and herein. The thread and the fabric shall no

34、t be lubricated by any means prior to or during the seaming. specification and the figures, the specification shall govern. Figures are furnished for guidance . and information only. If there are any inconsistencies betwen the 6 Provided by IHSNot for ResaleNo reproduction or networking permitted wi

35、thout license from IHS-,-,-MIL-J-87250 84 9999906 0433999 LI Material MIL-J-87250 (USAF) I TABLE I. List of pattern Darts. Basic mterial (see 3.3.1) Lining (see 3.3.2) Liner (see 3.3.2) Insulating cloth (see 3.3.3) Fusible interlining (see 3.3.5) Polyester (see 3.3.7) Pattern nomnclatuie Front Back

36、Front facing Tops 1 eeve Undersleeve Shoulder loop Pocket WE 1 t Pocket facing Col lar Collars tand Extension for knit waistband Back neck facing Front * Back Tops leeve Undersleeve Front Back Front Back Col lar Collarstand Pocket he 1 t Shoulder 1 oops Front edge reinforcement Pocket Cut parts 2 1

37、2 2 2 4 2 2 2 2 2 1 2 1 2 2 4 2 2 1 3.6.1 Stitches, seams, and stitchings. All stitch, seam, and stitching types specified in table II shall conform to FED-STD-751. or more methods of seam or stitch types are specified for the same operation, any one of them may be used, Whenever two 3.6.1.1 Stitche

38、s per inch. The number of stitches per inch specified in table II shall be interpreted to be the minimum and the maximumnumber of stitchesper inch permitted. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-J-87250 (USAF) 3.6.1.2 Thread breaks a

39、nd ends of seams and stitchings. The ends of all seam and stitchings produced with stitch type 301, and at least three tying, overlapping, or backshitches are used to secure the ends of the stitching. 3.7 Manufacturing operations requirements. The jacket and liner shall be made in accordance with op

40、eration requirements specified in table II. The contractor is not required to follow the exact sequence of operations listed unless otherwise specified. used to facilitate mufacture is permissible provided that the threads are removed or do not show on the finished jacket or liner. Any additional ba

41、sting or holding stitching 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- No. - 1. 2. MIL-J-7250 84 979790b 0412001 7 M MIL-J-87250 (USAF) TABLE II. Manufacturing operations. Description of Operation Cut parts. a. Zut the jacket in accordance wit

42、h the patterns which have mrkings for place- ment of pockets, buttons, and button- hole; sizes; warp directional lines; and notches for proper assembly of all parts. b. from the outershell fabric. shall be 4 inches long and 2 inches wide. Cut the center it to the collarstand, and back- stitch or bar

43、tack the folded ends. The finished hanger shall be 3/8 21/8 inch wide with a free opening 2-1/2 2114 inches long between the bartack at the ends. Make outershell sleeves. a. Join the forearm seam of the outer- shell sleeve. b. Join the backarm seam of the outer- shell sleeve. c. Press seam open and

44、flat. Make. sleeve linings. a. Join the forearm seam of the sleeve 1 ining . b. Join the backarm seam of the sleeve 1 ining . c Overedge stitch the raw edges of the shoulder seams together. OR d. The raw edges of the linings may be joined by seaming and overedge stitching in one operation. e. Press

45、seam smoth and flat. 12 Stitch Type 301 or bar tack 30 1 30 1 30 1 30 1 503 or 504 515 or 516 or 517 or 51% or 519 Seam and %itching Type Sd- 1 Sa- 1 $Sa- 1 ;Sa- 1 ;Sa- 1 IFd- 1 $Sa-2 Stitches Fer Inch 10- 14 10- 14 10- 14 10- 14 10- 12 10- 14 Provided by IHSNot for ResaleNo reproduction or networki

46、ng permitted without license from IHS-,-,-NIL-J-87250 84 = 777770b 0412005 4 MIL-J-87250 (USAI?) TABU II. Manufacturing operations. - Continued Description of Operation Make slash wckets. We a single welt pocket in each front at the pattern marks. The welt shall be 718 2118 inch wide and 6-3/8 51/8

47、inches long. a. Fold in half lengthwise and press the tw welt pieces. b. Turn under the inner edge of the tuio facing pieces and sew to each pocketing 1/16 inch from the edge. . c. Place the pocketing with the attached facing and the wlt with the pocketing on top at the drill marks. d. drill marks.

48、Sew the pieces on the fronts at the e. Tongue notch the corners. Cut the opening for the pocket. f. the slits. Turn the pocketing and welt through g. Raise stitch the bottom of the welt through the front and the pocketing with a single row of stitching 1/16 inch from the edge. h. inside through the

49、welt and the facing with a sing1,e row of stitching. Seam the tongues at the ends on the i. Raise stitch the seam joining to facing to the opening and the ends of the opening through the slash pocket with a single row of stitching 1/16 inch from the edge. ti tch Type 10 1 IO 1 30 1 30 1 30 1 Seam and Stitching Type Sd- 1 SSa- 1 LSq-2 (b) SSa- 1 LSq-2 (b) It itches er Inah LO-14 10-14 10- 14 10- 14 10- 14 Provided by IHSNot