AECMA PREN 4153-2009 Aerospace series Rivets solid universal head in aluminium alloy 2219 anodized or chromated metric series Edition P 1《航空航天系列.铝合金2219 万能头实心铆钉 阳极氧化或铬酸盐处理 公制系列.版本P.pdf

《AECMA PREN 4153-2009 Aerospace series Rivets solid universal head in aluminium alloy 2219 anodized or chromated metric series Edition P 1《航空航天系列.铝合金2219 万能头实心铆钉 阳极氧化或铬酸盐处理 公制系列.版本P.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 4153-2009 Aerospace series Rivets solid universal head in aluminium alloy 2219 anodized or chromated metric series Edition P 1《航空航天系列.铝合金2219 万能头实心铆钉 阳极氧化或铬酸盐处理 公制系列.版本P.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ASD STANDARD NORME ASD ASD NORM prEN 4153 Edition P 1 April 2009 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION Aeros

2、pace series Rivets, solid, universal head, in aluminium alloy 2219, anodized or chromated , metric series Srie arospatiale Rivets ordinaires, tte ronde aplatie, en alliage daluminium 2219, anodiss ou chromats, srie mtrique Luft- und Raumfahrt Vollniete, mit Universalkopf, aus Aluminiumlegierung 2219

3、, anodisiert oder chromatiert, metrische Reihe This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been tech

4、nically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. Af

5、ter examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at

6、national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 April 2009 Comments should be sent within six months after the date of publication to ASD-STAN Mechanical Domain Copyright 2009 by ASD-STAN Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-