ABS 109 CORR-2017 RULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT 2017.pdf

《ABS 109 CORR-2017 RULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT 2017.pdf》由会员分享，可在线阅读，更多相关《ABS 109 CORR-2017 RULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT 2017.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 RULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT 2017 CORRIGENDA/EDITORIALS 10 April 2017 Page No. Paragraph Comments Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 2 Design Pressure 64 3-2-2/9.1 In definition of g, “1.005 N/cm2-m (0.1025 kgf/cm2-m,

2、0.44 lbf/in2-ft)” to read “10.05 kN/m3(1.025 tf/m3, 0.44 lbf/in2-ft)”. 70 3-2-2/Table 4 Add Note: “Note: For craft between 12.2 and 30.5 m (40 and 100 ft), design pressure is to be obtained by interpolation. L = craft length as defined in 3-1-1/3”. Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 8 Rudders and Steering Equipment 145 3-2-8/11.5 In definition of 0, “0” to read “o”. ABSRULES FOR BUILDING AND CLASSING HIGH-SPEED NAVAL CRAFT .2017 1