ABS 10-2017 RULES FOR BUILDING AND CLASSING STEEL BARGES 2017.pdf

《ABS 10-2017 RULES FOR BUILDING AND CLASSING STEEL BARGES 2017.pdf》由会员分享，可在线阅读，更多相关《ABS 10-2017 RULES FOR BUILDING AND CLASSING STEEL BARGES 2017.pdf（305页珍藏版）》请在麦多课文档分享上搜索。

1、 Rules for Building and Classing Steel Barges RULES FOR BUILDING AND CLASSING STEEL BARGES 2017 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2016 American Bureau of Shipping. All rights reserved. ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA T

2、able of Contents RULES FOR BUILDING AND CLASSING STEEL BARGES CONTENTS Notices and General Information . 1 PART 1 Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) . 6 CHAPTER 1 Scope and Conditions of Classification . 8 See also separately published booklet

3、 ABS Rules for Conditions of Classification (Part 1) PART 2 Materials and Welding 16 See separately published booklet ABS Rules for Materials and Welding (Part 2) PART 3 Hull Construction and Equipment . 17 CHAPTER 1 General 18 CHAPTER 2 Hull Structures and Arrangements . 30 CHAPTER 3 Equipment 114

4、CHAPTER 4 Testing, Trials and Surveys During Construction Hull 131 CHAPTER 5 Safety Requirements for Barges with Personnel . 143 PART 4 Barge Systems and Machinery . 151 CHAPTER 1 Machinery, Piping and Electrical Systems . 152 PART 5 Specific Barge Types . 169 CHAPTER 1 Dry Cargo Barges 170 CHAPTER

5、2 Tank Barges . 190 CHAPTER 3 Other Barge Types . 248 PART 7 Surveys After Construction . 303 See separately published booklet ABS Rules for Survey After Construction (Part 7) ii ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 Notices and General Information Notices and General Information CON

6、TENTS Introduction . 2 TABLE 1 Applicable Editions of Booklets Comprising 2017 Barge Rules . 3 TABLE 2 Division and Numbering of Rules 3 Change Notice (2017) . 4 TABLE 3 Summary of Changes from the 2016 Rules 4 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 1 Notices and General Information I

7、ntroduction 1. The year 2017 edition of the Rules for Building and Classing Steel Barges consists of the eight (8) booklets as shown in Table 1. With regard to three booklets, Part 1, Part 2, and Part 7: a) The purpose of the generic title ABS Rules for Conditions of Classification (Part 1) is to re

8、flect the expanded contents of PART 1, as a result of including consolidated requirements for “Classification” applicable to all types of and sizes of vessels, barges and specific shipboard arrangements/systems, etc., except for those in offshore service, as specified in the Foreword to Part 1. Addi

9、tional specific requirements are contained in Part 1 of these Rules for Building and Classing Steel Barges. b) The purpose of the generic title ABS Rules for Materials and Welding of PART 2 is to emphasize the common applicability of the requirements to ABS-classed vessels, other marine structures a

10、nd their associated machinery, and thereby make PART 2 more readily a common “PART” of various ABS Rules and Guides, as appropriate. c) The purpose of the generic title ABS Rules for Survey After Construction (Part 7) is to reflect the expanded contents of PART 7, as a result of including consolidat

11、ed requirements for “Surveys After Construction” applicable to all types and sizes of vessels, barges and specific shipboard arrangements/systems, etc., as specified in Part 7, Chapter 1, Section 1. 2. The numbering system applied in the Rules is shown in Table 2. 3. The primary changes from the 201

12、6 edition of the Rules are identified and listed in Table 3. The effective date of the indicated Rule Changes is 1 January 2017, unless specifically indicated otherwise. 4. The effective date of each technical change since 1993 is shown in parenthesis at the end of the subsection/paragraph titles wi

13、thin the text of each Part. Unless a particular date and month are shown, the years in parentheses refer to the following effective dates: (2000) and after 1 January 2000 (and subsequent years) (1996) 9 May 1996 (1999) 12 May 1999 (1995) 15 May 1995 (1998) 13 May 1998 (1994) 9 May 1994 (1997) 19 May

14、 1997 (1993) 11 May 1993 5. Until the next edition of the Rules for Building and Classing Steel Barges is published, Notices and/or Corrigenda, as necessary, will be published on the ABS website www. eagle.org only, and will be available free for downloading. It is not intended to publish hard copie

15、s of future Notices and/or Corrigenda to existing Rules or Guides. The consolidated edition of the Rules for Building and Classing Steel Barges, which includes Notices and/or Corrigenda using different colors for easy recognition, will be published on the ABS website only when Notices and/or Corrige

16、nda are issued. 6. The listing of CLASSIFICATION SYMBOLS AND NOTATIONS is available from the ABS website www.eagle.org for download. 2 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 Notices and General Information TABLE 1 Applicable Editions of Booklets Comprising 2017 Barge Rules Rules for B

17、uilding and Classing Steel Barges Notices and General Information 2017 Part 1: Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) (1)2017 Part 3: Hull Construction and Equipment 2017 Part 4: Barge Systems and Machinery 2017 Part 5: Specific Barge Types 2017 R

18、ules for Conditions of Classification not included (1,2)Part 1: Rules for Conditions of Classification 2017 Rules for Materials and Welding not included (2)Part 2: Rules for Materials and Welding 2017 Rules for Survey After Construction not included (2)Part 7: Surveys After Construction 2017 Notes:

19、1 The requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional specific requirements are contained in Part 1 of these Rules. 2 The latest edition of these Rules is to be referred to. These Rules may be downlo

20、aded from the ABS website at www.eagle.org, Rules and Guides, Downloads or may be ordered separately from the ABS Publications online catalog at www.eagle.org, Rules and Guides, Catalog. TABLE 2 Division and Numbering of Rules Division Number Part Part 1 Chapter Part 1, Chapter 1 Section Section 1-1

21、-1 Subsection (see Note 1) 1-1-1/1 Paragraph (see Note 1) 1-1-1/1.1 Subparagraph 1-1-1/1.1.1 Item 1-1-1/1.1.1(a) Subitem 1-1-1/1.1.1(a)i) Appendix Appendix 1-1-A1 or Appendix 1-A1-1 Note: 1 An odd number (1, 3, 5, etc.) numbering system is used for the Rules. The purpose is to permit future insertio

22、ns of even-numbered paragraphs (2, 4, 6, etc.) of text and to avoid the necessity of having to renumber the existing text and associated cross-references, as applicable, within the Rules and associated process instructions, check sheets, etc. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 3 N

23、otices and General Information Change Notice (2017) TABLE 3 Summary of Changes from the 2016 Rules EFFECTIVE DATE 1 January 2017 shown as (2017) (based on the contract date for new construction between builder and Owner) Part/Para. No. Title/Subject Status/Remarks PART 3 Hull Construction and Equipm

24、ent 3-1-1/17 Truss To provide visual clarification and guidance regarding the requirements for trusses. 3-1-2/Table 2 Material Grade To clarify that even if A36 is used it should be produced by a steel mill approved by ABS. 3-1-2/13.3 Serrated Sections To provide visual clarification and guidance re

25、garding the requirements for serrated sections. 3-1-2/Figure 1 (New) Serrated Section To provide visual clarification and guidance regarding the requirements for serrated sections. 3-2-1/13 Buckling Calculations To clearly define buckling requirements for steel barges. 3-2-4/3.1 Channel Construction

26、 To show the filler plates arrangement and specify their welding to the adjacent members. 3-2-4/Figure 1 (New) Typical Filler Plate Design Details To show the filler plates arrangement and specify their welding to the adjacent members. 3-2-5/3.15.1 Trusses Arrangement To provide visual clarification

27、 and guidance regarding the requirements for trusses. 3-2-6/5.7.3 End Connection To provide an option of direct strength analysis. 3-2-8/3.11 Doors for Access Openings To clarify the requirements for weathertight doors located on exposed bulkheads of superstructures and deckhouses. 3-2-8/7.1 General

28、 To clarify superstructure deck requirements. 3-2-10/1.3 Height To align the requirements with IACS UI LL14 which says “A guard rail should also be required for first tier deckhouses and for superstructures ends”. 3-2-12/9.13 Overlapped Seams in Barges Up to 76.2 Meters (250 Feet) in Length To clari

29、fy that the use of overlapped seams in deck plating and/or shell plating is only allowed for barges up to 76.2 m (250 feet) in length and should also not be used in way of tanks carrying flammable liquids. 3-2-12/Figure 1 Overlapped Seams of Deck and Shell Plating To clarify that the use of overlapp

30、ed seams in deck plating and/or shell plating is only allowed for barges up to 76.2 m (250 feet) in length and should also not be used in way of tanks carrying flammable liquids. 3-2-12/9.17 (New) Widely Spaced Floors To specify the requirements for widely spaced floors. 3-5-1 General To address saf

31、ety concerns for barges carrying a large number of persons on board, in line with Section 5-3-6. 3-5-2/1 Bilge System To address safety concerns for barges carrying a large number of persons on board, in line with Section 5-3-6. PART 4 Barge Systems and Machinery 4-1-2/5.1.2(a)ix) To provide require

32、ments for side covers, in line with IACS UR P3 Rev 4. PART 5 Specific Barge Types 5-1-1/15.1 Truss Arrangement To provide visual clarification and guidance regarding the requirements for trusses. 5-1-1/Figure 1 Deck Cargo Barge with L 76 meters (250 feet) To clarify the application of the figure. 5-

33、1-1/Figure 2 Deck Cargo Barge To clarify the application of the figure. 4 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 Notices and General Information Part/Para. No. Title/Subject Status/Remarks 5-1-1/Figure 3 Deck Cargo Barge To clarify the application of the figure. 5-1-2/5.1 Center Girde

34、r To remove requirements for intact girders in fresh water and fuel oil tanks, since free surface effects are considered by the stability requirements of the Intact Stability Code. 5-2-2/1.1 Application To remove figure, since it does not represent a common type of construction for double skin tank

35、barges. 5-2-2/1.3 Scantlings To align the Barge Rules with the Steel Vessel Rules and IACS Common Structural Rules, which both require thermal analysis at 80C. 5-2-2/9 Side and Deck Girders, Side Transverses and Vertical Web Frames on Longitudinal Bulkheads To remove figure, since it does not repres

36、ent a common type of construction for double skin tank barges. 5-2-2/Figure 3 (Deleted) Open Framing with Transverse Trusses Utilized To remove figure, since it does not represent a common type of construction for double skin tank barges. 5-2-2/Figure 3 Double Skin Barge with Trunk To clarify the ap

37、plication of the figure and to define parts of the double skin tank structure. 5-2-2/Figure 4 Double Skin Barge with Trunk To clarify the application of the figure and to define parts of the double skin tank structure. 5-2-2/Figure 5 Double Skin Barge with Trunk To clarify the application of the fig

38、ure and to define parts of the double skin tank structure. 5-2-3/1.3 Scantlings To align the Barge Rules with the Steel Vessel Rules and IACS Common Structural Rules, which both require thermal analysis at 80C. 5-2-4/1.3 Scantlings To align the Barge Rules with the Steel Vessel Rules and IACS Common

39、 Structural Rules, which both require thermal analysis at 80C. 5-3-1/13 Structure in Way of Connection To set a standard for design and review of structure in way of connection. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 5 PART Part 1: Conditions of Classification (Supplement to the ABS R

40、ules for Conditions of Classification) 1 Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification) CONTENTS CHAPTER 1 Scope and Conditions of Classification . 8 Section 1 Classification 9 Section 2 Classification Symbols and Notations 10 Section 3 Rules for Classifi

41、cation 13 Section 4 Submission of Plans 14 6 ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 PART Foreword 1 Foreword (1 January 2008) For the 2008 edition, Part 1, “Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification (Part 1)

42、for all vessels other than those in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Part 1” to ABS-classed vessels, other marine structures and their associated machinery, and thereby make “Conditions of Classificat

43、ion” more readily a common Rule of the various ABS Rules and Guides, as appropriate. Thus, this supplement specifies only the unique requirements applicable to steel barges. This supplement is always to be used with the aforementioned Rules for Conditions of Classification (Part 1). ABSRULES FOR BUI

44、LDING AND CLASSING STEEL BARGES .2017 7 PART Chapter 1: Scope and Conditions of Classification 1 CHAPTER 1 Scope and Conditions of Classification CONTENTS SECTION 1 Classification 9 SECTION 2 Classification Symbols and Notations . 10 1 Unrestricted Service 10 3 Classification Designations . 10 3.1 B

45、arge . 10 5 Notations . 10 5.1 Oil Tank Barge . 10 5.3 Fuel Oil Tank Barge . 10 5.5 Chemical Tank Barge 10 5.7 Liquefied Gas Tank Barge . 10 5.9 Tank Barge 10 5.11 Independent Tank Barge . 10 5.13 Pressure Tank Barge . 11 5.15 Fuel Oil or Chemical Tank Barge . 11 5.17 Fuel Oil and Chemical Tank Barg

46、e 11 5.19 Oil or Chemical Tank Barge . 11 5.21 Oil and Chemical Tank Barge 11 5.23 ITB Barge 11 5.25 Oil Spill Recovery Barges (OSR-S1, OSR-C1, OSR-S2 or OSR-C2) 11 5.27 Crane CRC Barge 11 5.29 Pipe Laying Barge . 11 5.31 Cable Laying Barge . 11 5.33 Accommodation Barge 11 5.35 Machinery 12 7 Dual a

47、nd Multi-Purpose Barges 12 SECTION 3 Rules for Classification 13 1 Application . 13 1.1 General 13 1.3 Safety Requirements for Barges with Personnel . 13 3 Interpretation . 13 SECTION 4 Submission of Plans 14 1 Hull Plans 14 3 Loading Conditions . 15 5 Machinery Plans . 15 8 ABSRULES FOR BUILDING AN

48、D CLASSING STEEL BARGES .2017 PART Section 1: Classification 1 CHAPTER 1 Scope and Conditions of Classification SECTION 1 Classification (1 January 2008) The requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Addi

49、tional requirements specific to steel barges are contained in the following Sections of this Part. ABSRULES FOR BUILDING AND CLASSING STEEL BARGES .2017 9 PART Section 2: Classification Symbols and Notations 1 CHAPTER 1 Scope and Conditions of Classification SECTION 2 Classification Symbols and Notations (1 January 2008) A listing of Classification Symbols and Notations available to the Owners of vessels, offshore drilling and production units and other marine structures and systems, “List of ABS Notations and Symbols” is available from the ABS website “http:/www.e