EN IEC 63032-2018 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification.pdf

《EN IEC 63032-2018 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification.pdf》由会员分享，可在线阅读，更多相关《EN IEC 63032-2018 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specificationBS EN IEC 63032:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 63032 August 2018 IC

2、S 33.180.20 English Version Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification (IEC 63032:2018) Dispositifs dinterconnexion et composants passifs fibroniques - Filtres fibroniques passe-bande accordables - Spcification gnrique (

3、IEC 63032:2018) Lichtwellenleiter-Verbindungselemente und passive Bauteile - Abstimmbare LWL-Bandpassfilter - Fachgrundspezifikation (IEC 63032:2018) This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stip

4、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Europ

5、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC mem

6、bers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, No

7、rway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Cent

8、re: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 63032:2018 E National forewordThis British Standard is the UK implementation of EN IEC 63032:2018. It is identical to IEC 63032:2018.

9、The UK participation in its preparation was entrusted to Technical Committee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the nec

10、essary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 94724 7ICS 33.180.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard

11、 was published under the authority of the Standards Policy and Strategy Committee on 31 August 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 63032:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 63032 August 2018 ICS 33.180.20 English Ver

12、sion Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification (IEC 63032:2018) Dispositifs dinterconnexion et composants passifs fibroniques - Filtres fibroniques passe-bande accordables - Spcification gnrique (IEC 63032:2018) Lichtwe

13、llenleiter-Verbindungselemente und passive Bauteile - Abstimmbare LWL-Bandpassfilter - Fachgrundspezifikation (IEC 63032:2018) This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions fo

14、r giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in

15、three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national e

16、lectrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,

17、 Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 2

18、3, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 63032:2018 E BS EN IEC 63032:2018EN IEC 63032:2018 2 European foreword The text of document 86B/4125/FDIS, future edition 1 of IEC 63032, prepared by SC 86B

19、 “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 63032:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publicati

20、on of an identical national standard or by endorsement (dop) 2019-03-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-06-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights

21、. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 63032:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have

22、 to be added for the standards indicated: IEC 60869-1 NOTE Harmonized as EN 60869-1. IEC 60875-1 NOTE Harmonized as EN 60875-1. IEC 60876-1 NOTE Harmonized as EN 60876-1. IEC 61202-1 NOTE Harmonized as EN 61202-1. IEC 61978-1 NOTE Harmonized as EN 61978-1. IEC 62074-1 NOTE Harmonized as EN 62074-1.

23、IEC 62077 NOTE Harmonized as EN 62077. IEC 62099 NOTE Harmonized as EN 62099. BS EN IEC 63032:2018EN IEC 63032:2018 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a w

24、ay that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified

25、by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60027 Series Letter symbols to be used in electrical t

26、echnology EN 60027 Series IEC 60617-DB - Graphical symbols for diagrams - - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC 60825-1 - Safety of laser products - Part 1: Equipment clas

27、sification and requirements EN 60825-1 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC/TR 61930 - Fibre optic graphical symbology - - IEC 61977 - Fibre optic interconnecting devices and passive components - Fib

28、re optic filters - Generic specification EN 61977 - IEC/TS 62627-09 - Fibre optic interconnecting devices and passive components - Vocabulary for passive optical devices - - ISO 129 - Technical drawings; Dimensioning; General principles, definitions, methods of execution and special indications - -

29、ISO 286-1 - Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits EN ISO 286-1 - ISO 1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-ou

30、t EN ISO 1101 - ISO 8601 - Data elements and interchange formats - Information interchange - Representation of dates and times - - BS EN IEC 63032:2018 2 IEC 63032:2018 IEC 2018 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Requirements 11 4.1 Classification 11

31、 4.1.1 General . 11 4.1.2 Type 11 4.1.3 Style 11 4.2 Documentation 12 4.2.1 Symbols 12 4.2.2 Drawings . 12 4.2.3 Test and measurements 13 4.2.4 Test report . 13 4.2.5 Instructions for use 13 4.3 Standardisation system . 13 4.3.1 Performance standard . 13 4.3.2 Reliability standard 14 4.3.3 Interlink

32、ing . 14 4.4 Design and construction 15 4.4.1 Materials . 15 4.4.2 Workmanship . 15 4.5 Performance requirements 16 4.6 Identification and marking . 16 4.6.1 General . 16 4.6.2 Component marking . 16 4.6.3 Package marking . 16 4.7 Packaging . 16 4.8 Storage conditions 16 4.9 Safety . 17 Annex A (inf

33、ormative) General information of tuneable bandpass filters . 18 Annex B (informative) Examples of tuneable bandpass filter technologies 19 B.1 Tuneable filter using thermo-optic effects 19 B.2 Tuneable filter using acousto-optic effects 20 B.3 Tuneable filter using mechanical effects . 20 B.4 Tuneab

34、le filter using piezoelectric effects . 21 Bibliography 23 Figure 1 Illustration of wavelength tuneable bandpass filter . 7 Figure 2 Illustration of bandwidth tuneable bandpass filter . 8 Figure 3 Illustration of wavelength and bandwidth tuneable bandpass filter 8 Figure 4 Illustration of insertion

35、loss deviation of tuning . 9 Figure 5 Illustration of X dB bandwidth deviation of wavelength tuning . 10 Figure 6 Tuneable bandpass filter style configurations . 12 Figure B.1 Thermally tuneable thin film filter 19 BS EN IEC 63032:2018IEC 63032:2018 IEC 2018 3 Figure B.2 Thermally tuneable waveguide

36、 Bragg grating 19 Figure B.3 Thermally tuneable fibre Bragg grating . 19 Figure B.4 Acousto-optic tuneable bandpass filter 20 Figure B.5 Tuneable filter by changing the incident angle 20 Figure B.6 Tuneable filter by sliding the incident position . 21 Figure B.7 MEMS tuneable filter 21 Figure B.8 Tu

37、neable bandpass filter by gap control using piezoelectric effect 22 Table 1 IEC specification structure . 11 Table 2 Standards interlink matrix 15 Table 3 Quality assurance options . 15 BS EN IEC 63032:2018 4 IEC 63032:2018 IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNEC

38、TING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC TUNEABLE BANDPASS FILTERS GENERIC SPECIFICATION FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of

39、 IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (P

40、AS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising wi

41、th the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as n

42、early as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in t

43、hat sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committ

44、ees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide

45、 any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest

46、 edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whethe

47、r direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indi

48、spensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63032

49、 has been prepared by subcommittee SC 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee TC 86: Fibre optics. The text of this International Standard is based on the following documents: FDIS Report on voting 86B/4125/FDIS 86B/4129/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the I