IEC TS 62282-1-2013 Fuel cell technologies - Part 1 Terminology《燃料电池技术.第1部分 术语》.pdf

《IEC TS 62282-1-2013 Fuel cell technologies - Part 1 Terminology《燃料电池技术.第1部分 术语》.pdf》由会员分享，可在线阅读，更多相关《IEC TS 62282-1-2013 Fuel cell technologies - Part 1 Terminology《燃料电池技术.第1部分 术语》.pdf（82页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TS 62282-1 Edition 3.0 2013-11 TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE Fuel cell technologies Part 1: Terminology Technologies des piles combustible Partie 1: Terminologie IEC/TS62282-1:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserv

2、ed. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If y

3、ou have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette p

4、ublication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI o

5、u si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.

6、iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under cons

7、tant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, t

8、echnical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. El

9、ectropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line.

10、 Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui l

11、abore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigend

12、um ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les pu

13、blications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premi

14、er dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Client

15、s - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC/TS 62282-1 Edition 3.0 2013-11 TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE Fuel cell technologies Part 1: Terminology Technologies des piles combu

16、stible Partie 1: Terminologie INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 27.070 PRICE CODE CODE PRIX ISBN 978-2-83221-190-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internation

17、ale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 TS 62282-1 IEC:2013 CONTENTS FOREWORD . 3 1 Scope 5 2 Diagrams of generalized fuel cell systems . 5 2.1 Diagram

18、s . 5 2.2 Definition of diagram functions . 7 3 Terms, definitions and abbreviations . 8 Bibliography 32 Index 33 Figure 1 Stationary fuel cell power systems (3.49.3) 5 Figure 2 Portable fuel cell power systems (3.49.2) . 6 Figure 3 Micro fuel cell power systems (3.49.1) . 6 Figure 4 Fuel cell vehic

19、les (3.51) . 7 TS 62282-1 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FUEL CELL TECHNOLOGIES Part 1: Terminology FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nationa

20、l Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly

21、 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-government

22、al organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on tec

23、hnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by

24、IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unif

25、ormity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5)

26、 IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensu

27、re that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of a

28、ny nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the ref

29、erenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The

30、main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated ef

31、forts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be tra

32、nsformed into International Standards. IEC 62282-1, which is a technical specification, has been prepared by IEC technical committee 105: Fuel cell technologies. 4 TS 62282-1 IEC:2013 This third edition cancels and replaces the second edition, published in 2010. This third edition constitutes a tech

33、nical revision. The first edition of IEC/TS 62282-1:2005 was intended as a resource for the working groups of TC 105 and users of the TC 105 standards series; therefore, it only included terms and definitions used in the other IEC 62282 standards to provide consistency among those documents. This th

34、ird edition, as was the second edition, is a general fuel cell glossary, including all terms unique to fuel cell technologies; it has: a) added four new terms; 3.20, 3.43.1, 3.58 and 3.86.2; b) made editorial changes to thirty terms; 3.1, 3.4.2.3, 3.4.4, 3.14, 3.28, 3.33.1, 3.42.1, 3.42.2, 3.42.3, 3

35、.45, 3.48, 3.49, 3.52, 3.57, 3.66, 3.67, 3.69.2, 3.77.6, 3.82.2, 3.83, 3.84, 3.86.3, 3.86.4, 3.90, 3.94, 3.100, 3.108.4, 3.110.1, 3.110.4 and 3.115.5; and c) removed the term “heat rate“. The text of this technical specification is based on the following documents: Enquiry draft Report on voting 105

36、/450/DTS 105/471/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 62282 series, publis

37、hed under the general title Full cell technologies, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publicat

38、ion. At this date, the publication will be; transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. TS 62282-1 IEC:2013 5 FUEL CELL TECHNOLOGIES Part 1: Terminology 1 Scope This part of IEC 62282 provides uniform terminology in the forms of diag

39、rams, definitions and equations related to fuel cell technologies in all applications including but not limited to stationary power, transportation, portable power and micro power applications. Not found here are words and phrases, which can be found in standard dictionaries, engineering references

40、or the IEC 60050 series. NOTE The first edition of IEC 62282 was intended as a resource for the working groups and users of the IEC 62282 series of fuel cell standards. This third edition, as well as the second edition, has been expanded into a general fuel cell glossary. 2 Diagrams of generalized f

41、uel cell systems 2.1 Diagrams Fuel processing system Thermal management system Fuel cell stack or module Power conditioning system Oxidant processing system Ventilation system Internal power needs Onboard energy storage Water treatment system Automatic control system Fuel cell power system System bo

42、undary Power inputs Electrical thermal mechanical Recovered heat Waste heat Fuel Oxidant Ventilation Inert gas Water EMD, vibration, wind, rain, temperature, etc. Useable power Electrical Discharge water Exhaust gases, ventilation EMI, noise, vibration IEC 724/10 Figure 1 Stationary fuel cell power

43、systems (3.49.3) 6 TS 62282-1 IEC:2013 Fuel processing system Thermal management system Fuel cell stack Power conditioning system Oxidant processing system Ventilation system Internal power needs Onboard energy storage Water treatment system Automatic control system Fuel cell power system System bou

44、ndary Power inputs Electrical thermal Waste heat Oxidant Ventilation Inert gas Water EMD, vibration, wind, rain, temperature, etc. Useable power Electrical Discharge water Exhaust gases, ventilation EMI, noise, vibration Fuel IEC 725/10 Figure 2 Portable fuel cell power systems (3.49.2) Water cartri

45、dge (optional) Fuel cartridge Fuel cartridge Thermal management system Internal power needs (optional) Fuel management Mechanical interface signal interface Fuel supply interface or Internal reservoir (optional) Air management Total control system Micro fuel cell stack Water and/or bi-product manage

46、ment Primary battery (optional) Power conditioning system Rechargeable battery or capacitor (optional) Waste cartridge (optional) Micro fuel cell power unit Mechanical interface signal interface Power interface Waste heat Useable power Micro fuel cell power system Air IEC 726/10 Figure 3 Micro fuel

47、cell power systems (3.49.1) TS 62282-1 IEC:2013 7 EXTERNAL FUEL SOURCE OnBOARD FUEL STORAGE FUEL PROCESSING SYSTEM (INDIRECT HYDROGEN FUEL CELL) FUEL CELL MODULE CONTROLLER AND ELECTRIC MOTOR TRANSMISSION WHEELS Fuel cell system OnBOARD ENERGY STORAGE (INTERNAL) Propulsion system Fuel cell vehicle I

48、EC 727/10 Figure 4 Fuel cell vehicles (3.51) 2.2 Definition of diagram functions The overall design of the power systems anticipated by this part of IEC 62282 are formed by an assembly of integrated systems, as necessary, intended to perform designated functions, as follows: Automatic control system

49、 System that is composed of sensors, actuators, valves, switches and logic components that maintain the fuel cell power system (3.49) parameters within the manufacturers specified limits without manual intervention. Fuel cell module Equipment assembly of one or more fuel cell stacks (3.50) which electrochemically converts chemical energy to electric energy and thermal energy intended to be integrated into a veh