IEC 62087-6-2015 Audio video and related equipment - Determination of power consumption - Part 6 Audio equipment《音频 视频和相关设备 功耗的测定 第6部分 音频设备》.pdf

《IEC 62087-6-2015 Audio video and related equipment - Determination of power consumption - Part 6 Audio equipment《音频 视频和相关设备 功耗的测定 第6部分 音频设备》.pdf》由会员分享，可在线阅读，更多相关《IEC 62087-6-2015 Audio video and related equipment - Determination of power consumption - Part 6 Audio equipment《音频 视频和相关设备 功耗的测定 第6部分 音频设备》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62087-6 Edition 1.0 2015-06 INTERNATIONAL STANDARD Audio, video and related equipment Determination of power consumption Part 6: Audio equipment IEC 62087-6:2015-06(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless othe

2、rwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any que

3、stions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 2

4、0 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC pu

5、blications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC Internati

6、onal Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committ

7、ee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.

8、electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary -

9、 std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Cent

10、re - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62087-6 Edition 1.0 2015-06 INTERNATIONAL STANDARD Audio, video and related equipment Determination of power consumption Part 6: Au

11、dio equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.160.10 ISBN 978-2-8322-2686-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 62087-6:2015 IEC 2015 CONTENTS

12、FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions 7 3.2 Abbreviations 9 4 Specification of operating modes and functions . 9 5 Measurement conditions 10 5.1 General . 10 5.2 Power source 11 5.3 Environmental conditio

13、ns 11 5.4 Acoustical environment . 11 5.5 Adjustment of controls 11 5.6 Power measurement instrument 11 5.7 Signal generation 11 5.8 Quantities to be specified and their accuracy 11 5.9 Loading of terminals . 11 5.10 Output level 11 5.10.1 General . 11 5.10.2 Output level at 1 W 11 5.10.3 Output lev

14、el at one-eighth of non-clipped power 11 5.11 Sound level adjustments . 12 5.12 Sound pressure level meter 12 5.13 Additional functions . 12 5.14 Operating modes 12 5.14.1 General . 12 5.14.2 On modes 12 5.14.3 Partial On modes . 12 5.14.4 Off mode . 13 5.14.5 Auto power down function 13 6 Measureme

15、nt procedure 13 6.1 Order of measurements 13 6.2 Setup 14 6.2.1 General . 14 6.2.2 Audio equipment terminals and settings . 15 6.2.3 Compact audio system including loudspeaker 16 6.3 Power measurement . 16 6.3.1 General . 16 6.3.2 Off and Partial On modes 16 6.3.3 On modes 17 6.3.4 Auto power down .

16、 18 Annex A (informative) Location for sound pressure test . 19 A.1 General . 19 A.2 Example test locations 19 IEC 62087-6:2015 IEC 2015 3 Bibliography 21 Figure 1 Order of measurements 14 Figure 2 Separate components 14 Figure 3 Audio systems (non separable components) 15 Figure 4 Audio systems (se

17、parable conponents) 15 Figure 5 Compact audio system including loudspeaker 15 Figure 6 Auto power down function 18 Figure A.1 Top view . 19 Figure A.2 Top and front view 20 Figure A.3 Side view 20 Table 1 Operating modes and functions . 10 4 IEC 62087-6:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL C

18、OMMISSION _ AUDIO, VIDEO AND RELATED EQUIPMENT DETERMINATION OF POWER CONSUMPTION Part 6: Audio equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The

19、 object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifi

20、cations (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations

21、liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters ex

22、press, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Comm

23、ittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Natio

24、nal Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does

25、not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have

26、 the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoe

27、ver, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicati

28、ons is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standar

29、d IEC 62087-6 has been prepared by technical area 12: AV energy efficiency and smart grid applications, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This first edition of IEC 62087-6 cancels and replaces Clause 9 of IEC 62087:2011. This standard together with IE

30、C 62087-1 to IEC 62087-5 cancels and replaces IEC 62087:2011. This International Standard constitutes a technical revision. This edition includes the following significant technical changes with respect to Clause 9 of IEC 62087:2011. The definition of the input signal is changed. The output power me

31、asurement of amplifiers is changed. The measurement method for compact audio systems including loudspeakers is added. IEC 62087-6:2015 IEC 2015 5 Methods for measuring On-decoding, idle and auto power down functions are added. Portions of the document related to general measuring conditions and proc

32、edures are now contained in IEC 62087-1:2015. Portions of the document related to signals and media are now in IEC 62087-2:2015. The titles have changed in order to comply with the current directives and to accommodate the new multipart structure of IEC 62087. The text of this standard is based on t

33、he following documents: FDIS Report on voting 100/2471/FDIS 100/2501/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 62087 series, published under the general title Audio, video, an

34、d related equipment Determination of power consumption, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on th

35、e IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 IEC 62087-6:2015 IEC 2015 INT

36、RODUCTION This part of IEC 62087 specifies methods of measurements for the power consumption of audio equipment for consumer use. It is used in conjunction with IEC 62087-2, which specifies signals and media. This International Standard includes measurements in the On mode (operation), which was pre

37、viously identified as “On (average) mode” and adds methods for measuring power consumption in the On-play, On-decoding, and idle sub-modes. These methods consider the effects of the auto power down function. Additionally, this standard includes determination of power consumption in the Partial On mo

38、de. This standard has been divided into multiple parts. At the time of publication of this part, the following parts are planned or published. Part 1: General Part 2: Signals and media Part 3: Television sets Part 4: Video recording equipment Part 5: Set-top boxes (STB) Part 6: Audio equipment IEC 6

39、2087-6:2015 IEC 2015 7 AUDIO, VIDEO AND RELATED EQUIPMENT DETERMINATION OF POWER CONSUMPTION Part 6: Audio equipment 1 Scope This part of IEC 62087 specifies the determination of the power consumption of audio equipment for consumer use. The various modes of operation which are relevant for measurin

40、g power consumption are defined. This standard is limited to audio equipment which can be connected to the mains. Audio equipment that includes a non-removable, main battery is not covered by this standard. Audio equipment may include any number of auxiliary batteries. The measuring conditions in th

41、is standard represent the normal use of the equipment and may differ from other specific conditions, for example as specified in safety standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicatio

42、n. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60268-5:2003, Sound system equipment Part 5: Loudspeakers IEC 60268-5:2003/AMD1:2007 IEC 62087-1:2015, Audio, video, and related equi

43、pment Determination of power consumption Part 1: General IEC 62087-2:2015, Audio, video, and related equipment Determination of power consumption Part 2: Signals and media IEC 62301:2011, Household electrical appliances Measurement of standby power 3 Terms, definitions and abbreviations 3.1 Terms an

44、d definitions For the purposes of this document, the terms and definitions in IEC 62087-1:2015, IEC 62087-2:2015, and the following apply. 3.1.1 additional functions functions that are not required for the basic operation of the device Note 1 to entry: Functions other than a main function. 8 IEC 620

45、87-6:2015 IEC 2015 3.1.2 audio equipment appliance which has the main function of reproducing analogue and/or digital audio signals 3.1.3 audio systems audio equipment of separable or non-separable components for one or more audio functions 3.1.4 compact audio systems including loudspeakers amplifie

46、r and one or more audio sources in a single enclosure, which might also contain the loudspeakers Note 1 to entry: The loudspeakers can be attached to, and separable from, the main enclosure. 3.1.5 free-field conditions environment, such as an anechoic room, in which the sound pressure decreases by a

47、 factor of 2 with the doubling of the distance from a point source 3.1.6 main function function, specified by the manufacturer, which produces sound from loudspeaker(s) and/or output terminal(s) 3.1.7 mass storage device non-removable, non-volatile storage for the recording of audio signals 3.1.8 mu

48、lti-channel two or more channels 3.1.9 non-clipped power sine-wave power dissipated in the rated load impedance, measured at 1 000 Hz or the frequency of the peak response, if the operation at 1 kHz is not intended, at the onset of clipping at either one or both peaks 3.1.10 rated load impedance imp

49、edance specified by the manufacturer and assumed to be a constant pure resistance measured at the output terminals of an amplifier 3.1.11 separate components standalone audio equipment that provides one or more audio functions 3.1.12 sound pressure level SPL logarithm of the ratio of a given sound pressure to the reference sound pressure Note 1 to entry: Unless otherwise specified, the reference sound pressure is 20 P for airborne sound. Note