TIA-1094-2007 Interworking Specification for cdma2000 1x and High Rate Packet Data System《cdma2000 1x及高速率分组数据系统的配合工作规范》.pdf

《TIA-1094-2007 Interworking Specification for cdma2000 1x and High Rate Packet Data System《cdma2000 1x及高速率分组数据系统的配合工作规范》.pdf》由会员分享，可在线阅读，更多相关《TIA-1094-2007 Interworking Specification for cdma2000 1x and High Rate Packet Data System《cdma2000 1x及高速率分组数据系统的配合工作规范》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD Interworking Specification for cdma20001x and High Rate Packet Data System TIA-1094 September 2007 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standards and Publicatio

2、ns are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need

3、. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use b

4、y Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whateve

5、r to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determ

6、ine the applicability of regulatory limitations before its use. (From Project No. 3-0332, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document

7、may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search

8、 or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to

9、investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-d

10、iscriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”)

11、engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclai

12、ms any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending pate

13、nt applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents o

14、f the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY O

15、F THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTI

16、ES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR

17、INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, B

18、REACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.

19、 TIA-1094 i CONTENTS 1 0FOREWORD 27iii 2 1NOTES. 28iv 3 2REFERENCES . 29vi 4 31 GENERAL .301-1 5 41.1 Acronyms and Abbreviations.311-1 6 51.2 Terms .321-1 7 61.3 Numeric Information .331-1 8 71.3.1 CDMA Numeric Information341-2 9 82 HRPD NOTIFICATION IN A 1X SYSTEM352-1 10 92.1 Mobile Station Requir

20、ements 362-1 11 102.1.1 Service Option 59 Page Notification.372-1 12 112.1.2 Service Option 69 Page Notification.382-1 13 122.1.3 Data Burst Message with Burst Type 000111 on f-dsch 392-2 14 132.1.4 Data Burst Message with Burst Type 000111 on f-csch 402-2 15 142.1.5 Response to Service Option Capab

21、ility Query412-2 16 152.2 Base Station Requirements.422-2 17 162.2.1 Data Burst Message with Burst Type 000111 on f-dsch 432-2 18 172.2.2 Data Burst Message with Burst Type 000111 on f-csch 442-3 19 183 HRPD System Information453-1 20 193.1 Mobile Station Requirements 463-1 21 203.2 Base Station Req

22、uirements.473-2 22 213.3 PDU Formats for Messages on the f-csch 483-2 23 223.4 MSG_ID Values on f-csch493-2 24 233.5 Alternative Technologies Information Message 503-3 25 TIA-1094 ii TABLES 1 24Table 3.3-1. f-csch Messages 513-2 2 25Table 3.4-1. MSG_ID Values on f-csch 523-3 3 26Table 3.5-1. Radio I

23、nterface Type 533-4 4 TIA-1094 iii 0FOREWORD 1 (This foreword is not part of this Standard) 2 This Standard was prepared by Technical Specification Group C of the Third Generation 3 Partnership Project 2 (3GPP2). This Standard contains the air interface requirements for 4 facilitating interworking b

24、etween cdma200001HRPD and 1x systems. This specification 5 applies to 1x Release 0 or higher mobile stations and base stations. This specification 6 applies to all releases of HRPD access terminals and access networks. 7 This is a supplementary specification to the 1x and HRPD air interface specific

25、ations. 8 This Standard consists of the following sections: 9 1. General. This section defines the acronyms and terms used in this document. 10 2. HRPD Notification in a 1x System. This section defines the procedures for notifying a 11 mobile station of the arrival of mobile terminated data on the H

26、RPD system. 12 3. HRPD System Information. This section defines the format and corresponding 13 procedures for the Alternative Technologies Information Message. 14 15 1cdma2000is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs

27、) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. TIA-1094 iv 1NOTES 1 1. Compatibility, as used in connection with this Standard, is understood to mean: 2 Any mobile stati

28、on is able to place and receive calls. Conversely all base stations are 3 able to place and receive calls for any mobile station. 4 2. Those wishing to deploy systems compliant with this standard should also take 5 notice of the requirement to be compliant with the applicable rules and regulations 6

29、 of local administrations. 7 3. “Base station” refers to the functions performed on the land side, which are typically 8 distributed among a cell, a sector of a cell, and a mobile switching center. 9 4. “Shall” and “shall not” identify requirements to be followed strictly to conform to the 10 standa

30、rd and from which no deviation is permitted. “Should” and “should not” 11 indicate that one of several possibilities is recommended as particularly suitable, 12 without mentioning or excluding others, that a certain course of action is preferred 13 but not necessarily required, or that (in the negat

31、ive form) a certain possibility or 14 course of action is discouraged but not prohibited. “May” and “need not” indicate a 15 course of action permissible within the limits of the standard. “Can” and “cannot” 16 are used for statements of possibility and capability, whether material, physical, or 17

32、causal. 18 5. Footnotes appear at various points in this Standard to elaborate and further clarify 19 items discussed in the body of the Standard. 20 6. Unless indicated otherwise, this Standard presents numbers in decimal form. 21 Binary numbers are distinguished in the text by the use of single qu

33、otation marks. 22 7. The following operators define mathematical operations: 23 indicates multiplication. 24 x indicates the largest integer less than or equal to x: 1.1 = 1, 1.0 = 1. 25 x indicates the smallest integer greater or equal to x: 1.1 = 2, 2.0 = 2. 26 |x| indicates the absolute value of

34、x: |-17| = 17, |17| = 17. 27 indicates exclusive OR (modulo-2 addition). 28 min (x, y) indicates the minimum of x and y. 29 max (x, y) indicates the maximum of x and y. 30 x mod y indicates the remainder after dividing x by y: x mod y = x - (y x/y). 31 weight(x) indicates the number of 1s in the bin

35、ary representation of x. 32 indicates binary right shift operation. 33 indicates binary left shift operation. 34 8. The following indentation is advised: 35 No indentation 36 TIA-1094 v bullet 1 1 bullet 2 2 + bullet 3. 3 bullet 4. 4 bullet 5. 5 bullet 6. 6 + bullet 7. 7 8 TIA-1094 vi 2REFERENCES 1

36、The following standards contain provisions which, through reference in this text, constitute 2 provisions of this Standard. At the time of publication, the editions indicated were valid. All 3 standards are subject to revision, and parties to agreements based on this Standard are 4 encouraged to inv

37、estigate the possibility of applying the most recent editions of the 5 standards indicated below. 6 7 1. TIA-856, cdma2000 High Rate Packet Data Air Interface Specification122. TIA-2000.5, Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems233. TSB-58, Administration of Par

38、ameter Value Assignments for cdma2000 Spread Spectrum Standards (Informative Reference) 4. TIA-2000.4, Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems 5. TIA-1030, Band Class Specification for cdma2000 Spread Spectrum Systems 2This specification applies to all relea

39、ses of HRPD access terminals and access networks 3This specification applies to 1x Release 0 or higher mobile stations and base stations TIA-1094 1-1 1 3GENERAL 1 1.1 6Acronyms and Abbreviations 2 CDMA. Code Division Multiple Access 3 HRPD. High Rate Packet Data 4 MC. Multi Carrier (1x and 3x). 5 PD

40、SN. Packet Data Service Node 6 1.2 7Terms 7 Access Network. The network equipment providing data connectivity between a packet 8 switched data network (typically the Internet) and an access terminal. 9 Access Terminal. A device providing data connectivity to a user. An access terminal may be 10 conn

41、ected to a computing device such as a laptop personal computer or it may be a self-11 contained data device such as a personal digital assistant. 12 Base Station. A fixed station used for communicating with mobile stations. Depending upon 13 the context, the term base station may refer to a cell, a

42、sector within a cell, an MSC, or other 14 part of the wireless system. 15 Code Division Multiple Access (CDMA). A technique for spread-spectrum multiple-access 16 digital communications that creates channels through the use of unique code sequences. 17 Mobile Station. A station in the Public Wireles

43、s Radio Telecommunications Service intended 18 to be used while in motion or during halts at unspecified points. Mobile stations include 19 portable units (e.g., hand-held personal units) and units installed in vehicles. The mobile 20 station consists of two parts ME and UIM. 21 1.3 8Numeric Informa

44、tion 22 23 Numeric information is used to describe the operation of the mobile station. The following 24 subscripts are used to clarify the use of the numeric information: 25 “s” indicates a value stored in the mobile stations temporary memory. 26 “sv” indicates a stored value that varies as the mob

45、ile station processes various tasks. 27 “sl” indicates the stored limits on values that vary. 28 “r” indicates a value received by the mobile station over a forward analog control 29 channel or a CDMA Forward Channel. 30 “p” indicates a value set in the mobile stations permanent security and identif

46、ication 31 memory. 32 “s-p” indicates a value stored in the mobile stations semi-permanent security and 33 identification memory. 34 TIA-1094 1-2 1.3.1 9CDMA Numeric Information 1 The following are internal values that are stored by the mobile station in temporary memory 2 that are not sent over the

47、 air. 3 ATIM_MSG_SEQs Alternative Technologies Information Message sequence number.4 TIA-1094 2-1 2 4HRPD NOTIFICATION IN A 1X SYSTEM 1 When a mobile station capable of HRPD operation is operating on a 1x system, it may not 2 monitor the HRPD system. The requirements in this section define the proce

48、dures for notifying 3 a mobile station of the arrival of mobile terminated data on the HRPD system. 4 2.1 10Mobile Station Requirements 5 The mobile station shall comply with the requirements specified in 2 unless specified 6 otherwise in this section. 7 2.1.1 17Service Option 59 Page Notification 8

49、 If the mobile station detects a page match and the SERVICE_OPTION field in the page message 9 (e.g., in a General Page Message) is set to either 0x003B (59 decimal) or to 0x59zz, where zz is 10 interpreted as the hexadecimal representation of an 8-bit HRPD ReservationLabel associated 11 with an IP flow that triggered the HRPD paging notification (see 3), the mobile station shall 12 perform the following: 13 If the mobile station accepts the HRPD notification specified by this page, then in 14 response to this page the mobile