TIA EIA-136-290-A-2001 TDMA Third Generation Wireless - RF Minimum Performance for 136HS Outdoor and 136HS Indoor Bearers《TDMA第3代无线电通信 136HS户外及136HS室内载体用射频(RF)最低性能》.pdf

《TIA EIA-136-290-A-2001 TDMA Third Generation Wireless - RF Minimum Performance for 136HS Outdoor and 136HS Indoor Bearers《TDMA第3代无线电通信 136HS户外及136HS室内载体用射频(RF)最低性能》.pdf》由会员分享，可在线阅读，更多相关《TIA EIA-136-290-A-2001 TDMA Third Generation Wireless - RF Minimum Performance for 136HS Outdoor and 136HS Indoor Bearers《TDMA第3代无线电通信 136HS户外及136HS室内载体用射频(RF)最低性能》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA/EIA STANDARD TDMA Third Generation Wireless - RF Minimum Performance for 136HS Outdoor and 136HS Indoor Bearers TIA/EIA-136-290-A (Revision of TIA/EIA-136-290) APRIL 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of

2、ANSI/TIA/EIA-136-290-A-2001 Approved: April 23, 2001 TIA/EIA-136-290-ANOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of product

3、s, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Sta

4、ndards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the Am

5、erican National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. Note: The users attention is called to the possibility that compliance with

6、 this document may require use of one or more inventions covered by patent rights. By publication of this standard, Interim Standard, or TSB, no position is taken with respect to the validity of those claims or of any patent rights in connection therewith. The patent holder(s) so far identified have

7、, however, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. Details may be obtained from the standards developer. This Standard does not purport to address all safety problems

8、 associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposals Nos. 4027-290-A and 40

9、27-290-A+1, formulated under the cognizance of the TIA TR-45.3 Subcommittee on Time Division Digital Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of EIA ELEC

10、TRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced w

11、ithout permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada 1-800-854-7179, International (303

12、) 397-7956 TIA/EIA-136-290-AiContents1. Introduction and Scope11.1 Scope 11.2 Normative References21.3 Abbreviations32. Frequency Bands and Channel Arrangement33. Reference Configuration .34. 200 kHz Channel Radio System.44.1 200 kHz Channel Transmitter Characteristics.44.2 200 kHz Receiver Characte

13、ristics.44.3 200 kHz Transmitter/Receiver Performance .44.4 200 kHz Transmitter, Spectrum Characteristics54.5 200 kHz Transmitter Power Levels Versus Time Characteristics 55. 1.6 MHz Channel (Indoor) Radio System 55.1 General Requirements .55.2 Transmitter Characteristics 55.2.1 GSM 05.05 Section 4.

14、1, Output Power .55.2.2 GSM 05.05 Section 4.2.1,Spectrum Due to the Modulation and Wide Band Noise 65.2.3 GSM 05.05 Section 4.5, Output Level Dynamic Operation 75.2.4 GSM 05.05 Section 4.5.1, Base Transceiver Station.75.2.5 GSM 05.05 Section 4.5.2, Mobile Station75.2.6 GSM 05.05 Section 4.6, Modulat

15、ion Accuracy 75.2.7 GSM 05.05 Section 4.7.2.2, (Intermodulation Attenuation) MXM 850 and MXM 1900 .85.3 Receiver Characteristics.85.3.1 GSM 05.05 Section 5.1, (Receiver) Blocking Characteristics .85.3.2 GSM 05.05 Section 5.2, AM Suppression Characteristics 95.3.3 GSM 05.05 Section 5.3, Intermodulati

16、on Characteristics95.4 Transmitter/Receiver Performance. 105.4.1 GSM 05.05 Section 6.1, Nominal Error Rates (NER) 105.4.2 GSM 05.05 section 6.2 Reference Sensitivity Level 105.4.3 GSM 05.05 section 6.3 Reference Interference Level 106. Change History . 22TIA/EIA-136-290-A11. Introduction and Scope12

17、This document defines the minimum performance requirements for the 136HS/EGPRS-3136 200 kHz (outdoor) and 1.6 MHz (indoor) digital mobile station (MS) and base station4(BS) transceivers, operating in the 700 MHz, 800 MHz, 1900 MHz and IMT-2000 band5(defined in 136-110).67The 200 kHz channel radio re

18、quirements are defined in GSM Release-99 specifications8which form (by way of reference) an integral part of this document. These (GSM)9specifications were developed by ETSI (European Telecommunications Standards10Institute) with the assistance of UWCC (Universal Wireless Communications11Consortium)

19、 member companies. These referenced publications are freely available at12http:/www.etsi.org.1314GSM 05.05 includes channel definitions and RF minimum performance specification. It15also defines requirements specific to so-called Mixed Mode systems, designated MXM-16850 and MXM-1900 in GSM 05.05. Th

20、e term Mixed-Mode refers to radio systems17operating in a mixed RF environment consisting of ANSI-136 30 kHz transceivers and18200 kHz EDGE/GSM transceivers. Mixed-Mode systems are also subject to compliance19with the applicable FCC rules.2021The term EGPRS-136 used in this document, and in other pa

21、rts of ANSI-136, is22TIA/TR45.3 specific and refers to a hybrid system consisting of EDGE radios, GPRS23packet data service nodes, ANSI-136 30 kHz circuit switched voice and data radios and24ANSI-41 core networks.2526271.1 Scope2829This document defines the requirements for transceivers which form t

22、he radio part of 13630HS/EGPRS-136 systems. The requirements are defined for two categories of parameters:3132- Those that are required to provide compatibility between the radio channels,33connected either to separate or common antennas, which are used in the system.34This category also includes pa

23、rameters providing compatibility with existing35systems in the same or adjacent frequency bands.36- Those that define the transmission quality of the system.37This document defines RF characteristics for Mobile Stations (MS) and Base Station38System (BSS). The BSS contains either Base Transceiver St

24、ations (BTS) or microcell39base transceiver stations (micro-BTS).4041The precise measurement methods are specified in GSM 11.10 and GSM 11.21.4243Unless otherwise stated, the requirements defined in this document apply to the full range44of environmental conditions specified for the equipment.45TIA/

25、EIA-136-290-A2121.2 Normative References34The following documents contain provisions, which, through reference in this text,5constitute provisions of the present document.67- References are either specific (identified by date of publication, edition number,8version number, etc.) or non-specific.9- F

26、or a specific reference, subsequent revisions do not apply.10- For a non-specific reference, the latest version applies.11- A non-specific reference to an ETSI shall also be taken to refer to later versions12published as an EN with the same number.13- In this document, references to GSM documents ar

27、e for Release 1999 versions14(version 8.x.y).151 GSM 01.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations16and acronyms“.172 GSM 02.06: “Digital cellular telecommunications system (Phase 2+); Types of18Mobile Stations (MS)“.192a GSM 03.52: “Digital cellular telecommunications

28、 system (Phase 2+); GSM Cordless20Telephony System (CTS); Lower layers of the CTS radio interface; Stage 2“.213 GSM 03.64: “Digital cellular telecommunications system (Phase 2+); General Packet22Radio Service (GPRS); GPRS Radio Interface Stage 2“.234 GSM 03.71: “Digital cellular telecommunication sy

29、stem (Phase 2+); Location24Services; Functional description Stage 2”.255 GSM 04.14: “Digital cellular telecommunications system (Phase 2+); Individual26equipment type requirements and interworking; Special conformance testing27functions”.286 GSM 05.01: “Digital cellular telecommunications system (Ph

30、ase 2+); Physical layer29on the radio path General description“.307 GSM 05.04: “Digital cellular telecommunications system (Phase 2+); Modulation“.318 GSM 05.05: “Digital cellular telecommunications system (Phase 2+); Digital cellular32telecommunications system (Phase 2+); Radio transmission and rec

31、eption33(GSM 05.05 version 8.3.0 Release 1999)349 GSM 05.08: “Digital cellular telecommunications system (Phase 2+); Radio35subsystem link control“.3610 GSM 05.10: “Digital cellular telecommunications system (Phase 2+); Radio37subsystem synchronisation“.3811 GSM 05.50: “Digital cellular telecommunic

32、ations system (Phase 2+); Background for39Radio Frequency (RF) requirements (GSM 05.50 version 8.1.0 Release 1999)”.40TIA/EIA-136-290-A312 GSM 11.10: “Digital cellular telecommunications system (Phase 2+); Mobile Station1(MS) conformity specification“.213 GSM 11.11: “Digital cellular telecommunicati

33、ons system (Phase 2+); Specification of3the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface“.414 GSM 11.21: “Digital cellular telecommunications system (Phase 2 Base5Station System (BSS) equipment specification; Radio aspects (GSM 11.21 version68.1.0 Release 1999)”.715 ITU-T Recom

34、mendation O.153: “Basic parameters for the measurement of error8performance at bit rates below the primary rate“.916 ETS 300 019-1-3: “Equipment Engineering (EE); Environmental conditions and10environmental tests for telecommunications equipment; Part 1-3: Classification of11environmental conditions

35、 Stationary use at weather protected locations“.1217 ETS 300 019-1-4: “Equipment Engineering (EE); Environmental conditions and13environmental tests for telecommunications equipment; Part 1-4: Classification of14environmental conditions Stationary use at non-weather protected locations“.1518 ANSI T1

36、.610 “Generic Procedures for Supplementary Services”, 199016171.3 Abbreviations1819Abbreviations used in this document are listed in GSM 01.04 1.2021222. Frequency Bands and Channel Arrangement2324The applicable bands are: the 700 MHz, Cellular (800 MHz), PCS (1900 MHz) and the25IMT-2000 bands (defi

37、ned in 136-110) The specific frequency bands, channel spacing26and numbering for the 200 kHz and 1.6 MHz bearer channels are specified in TIA/EIA-27136-110.2829Mobile Stations may operate on more than one of the frequency bands specified in GSM3005.05 clause 2 8 and TIA/EIA-136-110. These MSs, defin

38、ed in GSM 02.06 2, are31referred to as “Multiband MSs“. Multiband MSs shall meet all requirements for each of32the bands supported.3334Operators may implement networks that operate on a combination of the frequency bands35above to support multiband mobile terminals.3637383. Reference Configuration39

39、40The reference configuration for 136HS is described in TIA/EIA-136-330.41The micro-BTS is different from a normal BTS in two ways:42- The range requirements are much reduced whilst the close proximity requirements43are more stringent.44TIA/EIA-136-290-A4- The micro-BTS is required to be of small si

40、ze and of low complexity to allow1outdoor deployment in large numbers. Because of these differences, the2micro-BTS needs a different set of RF parameters to be specified. Where the RF3parameters are not different for the micro-BTS the normal BTS parameters shall4apply.56The pico-BTS is an extension

41、of the micro-BTS concept to the indoor environments. The7very low delay spread, low speed and small cell sizes give rise to a need for a different8set of RF parameters to be specified.910114. 200 kHz Channel Radio System12134.1 200 kHz Channel Transmitter Characteristics1415The relevant requirements

42、 of GSM 05.05 Release 99 8, section 4 apply.1617Note 1:18Depending on the frequency band and RF environment (mixed mode systems and FCC19regulated regions), the relevant requirements in GSM 05.05 V8.3.0 (Release 99) are those20that apply to the following systems:21a. Mobile Station GSM 850, PCS 1900

43、22b. Base Station/BTS MXM 850, MXM 19002324Note 2:25The IMT-2000 frequency bands as well as the 700 MHz band, which are specified in26TIA/EIA part 136-110, shall also apply to the systems listed in Note 1 above.27MSs and BSs operating in the 700 MHz shall comply with the requirements specified in28G

44、SM 05.05. MSs and BSs operating in the IMT-2000 bands shall comply with the29requirements specified in GSM 05.05 for PCS 1900 and MXM 1900 respectively.3031Note 3:32For further clarification of test methods, refer to GSM 05.50 11 Annex U (informative).3334354.2 200 kHz Receiver Characteristics3637Th

45、e relevant requirements of GSM 05.05 Release 99 8, section 5 apply. In addition, the38notes in section 4.1 above shall also apply.3940414.3 200 kHz Transmitter/Receiver Performance4243The relevant requirements of GSM 05.05 Release 99 8, section 6 apply. In addition, the44notes in section 4.1 above s

46、hall also apply.4546TIA/EIA-136-290-A54.4 200 kHz Transmitter, Spectrum Characteristics12The transmitter emission spectrum, due to the modulation, is defined in GSM 05.053Release 99 8, Annex A (informative). In addition, the notes in section 4.1 above shall4also apply.564.5 200 kHz Transmitter Power

47、 Levels Versus Time Characteristics78The transmitter power level versus time is defined in GSM 05.05 Release 99 8, Annex9B (normative). In addition, the notes in section 4.1 above shall also apply.101112135. 1.6 MHz Channel (Indoor) Radio System1415165.1 General Requirements1718The 136 HS indoor sys

48、tem uses a channel bandwidth of 1.6 MHz and employs an O-19QAM modulation (Offset Quadrature Amplitude Modulation). It is not included in the20family of systems specified in GSM 05.05 Release 99 8, yet, its radio21transmitter/receiver characteristics follow the requirements defined in GSM 05.0522Rel

49、ease 99 8, for GSM 850 (MS), PCS 1900 (MS) , MXM 850 (BTS) and MXM 190023(BTS) systems, with the appropriate modifications specified in the following sections.2425265.2 Transmitter Characteristics2728G35G2EG32G2EG31 G47G53G4D G30G35G2EG30G35 G53G65G63G74G69G6FG6E G34G2EG31G2C G4FG75G74G70G75G74 G50G6FG77G65G722930Please Note: For the 1.6 MHz channel, please refer to annex A and annex B at the end of31this document instead of the corresponding annexes in GSM 05.05.3233The requirements of GSM 05.05 V8.3.0 (Release 99), secti