NFPA 1002-2017 Standard for Fire Apparatus Driver Operator Professional Qualifications (Effective Date 12 1 2016).pdf
《NFPA 1002-2017 Standard for Fire Apparatus Driver Operator Professional Qualifications (Effective Date 12 1 2016).pdf》由会员分享,可在线阅读,更多相关《NFPA 1002-2017 Standard for Fire Apparatus Driver Operator Professional Qualifications (Effective Date 12 1 2016).pdf(37页珍藏版)》请在麦多课文档分享上搜索。
1、1002 Standard for Fire Apparatus Driver/Operator Professional Quali cations 2017 NFPA IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA STANDARDS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of wh
2、ich the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. Wh
3、ile the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any pers
4、onal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of a
5、ny information published herein. In issuing and making NFPA Standards available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using t
6、his document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents o
7、f NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of
8、 the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS Users of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by
9、Errata. An ofcial NFPA Standard at any point in time consists of the current edition of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or co
10、rrected by Errata, visit the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/docinfo.1002-1 NFPA and National Fire Protection Association are registered trademarks of the
11、National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2016 National Fire Protection Association . All Rights Reserved. NFPA 1002 Standard for Fire Apparatus Driver/Operator Professional Qualications 2017 Edition This edition of NFPA 1002, Standard for Fire Apparatus Driver/Ope
12、rator Professional Qualications , was prepared by the Technical Committee on Fire Fighter Professional Qualications and released by the Correlating Committee on Professional Qualications. It was issued by the Standards Council on November 11, 2016, with an effective date of December 1, 2016, and sup
13、ersedes all previous editions. This edition of NFPA 1002 was approved as an American National Standard on December 1, 2016. Origin and Development of NFPA 1002 In 1972, the Joint Council of National Fire Service Organizations (JCNFSO) created the National Professional Qualications Board (NPQB) for t
14、he re service to facilitate the development of nationally applicable performance standards for uniformed re service personnel. On December 14, 1972, the board established four technical committees to develop those standards, using the National Fire Protection Association (NFPA) standards-making syst
15、em. The initial committees addressed the following career areas: re ghter, re ofcer, re service instructor, and re inspector and investigator. The Technical Committee on Fire Fighter Professional Qualications met regularly after the adoption of NFPA 1001 to produce the rst edition of this document,
16、which was adopted by NFPA in 1976. NFPA 1002 was the second in the series of re ghter professional qualications standards. Additional editions were adopted and issued by NFPA under the auspices of the NPQB in 1982 and 1988. The original concept of the professional qualications standards, as directed
17、 by the JCNFSO and the NPQB, was to develop an interrelated set of performance standards specically for the uniformed re service. The various levels of achievement in the standards were to build upon each other within a strictly dened career ladder. In the late 1980s, revisions of the standards reco
18、gnized that the documents should stand on their own merit in terms of job performance requirements (JPRs) for a given eld. Accordingly, the strict career ladder concept was revised, except for the progression from re ghter to re ofcer, in order to allow civilian entry into many of the elds. These re
19、visions facilitated the use of the documents by other than the uniformed re services. In 1990, responsibility for the appointment of professional qualications committees and the development of the professional qualications standards were assumed by the NFPA. The Standards Council appointed the Corre
20、lating Committee on Professional Qualications to assume responsibility for coordinating the requirements of all professional qualications documents. The JPR format of this document is consistent with the other standards in the professional qualications project. Each JPR consists of the task to be pe
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NFPA10022017STANDARDFORFIREAPPARATUSDRIVEROPERATORPROFESSIONALQUALIFICATIONSEFFECTIVEDATE1212016PDF

链接地址:http://www.mydoc123.com/p-1008160.html