欢迎来到麦多课文档分享！ | 帮助中心海量文档，免费浏览，给你所需，享你所想！

麦多课文档分享

热门搜索：

上传我的资源

首页

专题

新闻中心

公告

麦多课文档分享 > 资源分类 > 标准规范 > 国际标准 > BS

国际标准,IEC,ISO,IEEE,JIS,ANSI,AS,EU,BS,GOST,IEC,IEEE,ISA,JASO,JIS,NASM资源 (共32716 份)

用时:18ms

资源分类：: 全部标准规范教学课件考试资料办公文档学术论文行业资料易语言源码

二级分类：: 全部国家标准行业标准地方标准企业标准国际标准规章制度

三级分类：: 全部 ANSI AS API ARMY BS EU GOST ASD DIN IEC IEEE ISA JASO JIS NASM ASTM 其他

资源格式：: 不限 doc ppt pdf 图片 flash 视频音频

上传时间：: 不限三天内一周内一个月内一年内

BS EN 1128-1996 Cement-bonded particleboards - Determination of hard body impact resistance《水泥接合的碎料板硬体冲击阻力测定》.pdf

下载积分： 10000 积分

BS EN 1128-1996 Cement-bonded particleboards - Determination of hard body impact resistance《水泥接合的碎料板硬体冲击阻力测定》.pdf

BS EN 1127-2-2014 Explosive atmospheres Explosion prevention and protection Basic concepts and methodology for mining《爆炸性环境爆炸预防和防护矿业用基本概念和方法》.pdf

下载积分： 10000 积分

BS EN 1127-2-2014 Explosive atmospheres Explosion prevention and protection Basic concepts and methodology for mining《爆炸性环境爆炸预防和防护矿业用基本概念和方法》.pdf

BS EN 1127-1-2011 Explosive atmospheres Explosion prevention and protection Basic concepts and methodology《爆炸性环境爆炸的预防和保护基本概念和方法》.pdf

下载积分： 10000 积分

BS EN 1127-1-2011 Explosive atmospheres Explosion prevention and protection Basic concepts and methodology《爆炸性环境爆炸的预防和保护基本概念和方法》.pdf

BS EN 1125-2008 Building hardware - Panic exit devices operated by a horizontal bar for use on escape routes - Requirements and test methods《建筑五金件逃离线路用水平杆控制的应急出口装置要求和试验方法》.pdf

下载积分： 10000 积分

BS EN 1125-2008 Building hardware - Panic exit devices operated by a horizontal bar for use on escape routes - Requirements and test methods《建筑五金件逃离线路用水平杆控制的应急出口装置要求和试验方法》.pdf

BS EN 1124-4-2013 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems Components for vacuum drainage systems and for dra.pdf

下载积分： 10000 积分

BS EN 1124-4-2013 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems Components for vacuum drainage systems and for dra.pdf

BS EN 1124-3-2008 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3 System X Dimensions《污水系统用带套管和孔座的纵向焊接不锈钢管.pdf

下载积分： 10000 积分

BS EN 1124-3-2008 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3 System X Dimensions《污水系统用带套管和孔座的纵向焊接不锈钢管.pdf

BS EN 1124-2-2014 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems System S forms and dimensions《废水系统用带插接套的长焊缝焊接不锈钢管.pdf

下载积分： 10000 积分

BS EN 1124-2-2014 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems System S forms and dimensions《废水系统用带插接套的长焊缝焊接不锈钢管.pdf

BS EN 1124-1-1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements testing quality control《污水系统用带套管和孔.pdf

下载积分： 10000 积分

BS EN 1124-1-1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements testing quality control《污水系统用带套管和孔.pdf

BS EN 1123-3-2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements fo.pdf

下载积分： 10000 积分

BS EN 1123-3-2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements fo.pdf

BS EN 1123-1-1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements testing quality control《污.pdf

下载积分： 10000 积分

BS EN 1123-1-1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements testing quality control《污.pdf

BS EN 1122-2001 Plastics - Determination of cadmium - Wet decomposition method《塑料镉的测定湿分解法》.pdf

下载积分： 10000 积分

BS EN 1122-2001 Plastics - Determination of cadmium - Wet decomposition method《塑料镉的测定湿分解法》.pdf

BS EN 1121-2000 Doors - Behaviour between two different climates - Test method《门在不同气候间的状态试验方法》.pdf

下载积分： 10000 积分

BS EN 1121-2000 Doors - Behaviour between two different climates - Test method《门在不同气候间的状态试验方法》.pdf

BS EN 1120-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a.pdf

下载积分： 10000 积分

BS EN 1120-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a.pdf

BS EN 1119-2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of n.pdf

下载积分： 10000 积分

BS EN 1119-2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of n.pdf

BS EN 1118-1999 Heat exchangers Refrigerant cooled liquid coolers Test methods for establishing the performance《热交换器冷却液制冷器性能确定的试验方法》.pdf

下载积分： 10000 积分

BS EN 1118-1999 Heat exchangers Refrigerant cooled liquid coolers Test methods for establishing the performance《热交换器冷却液制冷器性能确定的试验方法》.pdf

BS EN 1117-1999 Heat exchangers Liquid-cooled refrigerant condensers Test methods for establishing the performance《热交换器液体冷却制冷的冷凝器性能评定的试验方法》.pdf

下载积分： 10000 积分

BS EN 1117-1999 Heat exchangers Liquid-cooled refrigerant condensers Test methods for establishing the performance《热交换器液体冷却制冷的冷凝器性能评定的试验方法》.pdf

BS EN 1114-1-2011 Plastics and rubber machines Extruders and extrusion lines Safety requirements for extruders《橡胶和塑料制造机器挤压机和挤压工作线第1部分挤压设备的安全性要求》.pdf

下载积分： 10000 积分

BS EN 1114-1-2011 Plastics and rubber machines Extruders and extrusion lines Safety requirements for extruders《橡胶和塑料制造机器挤压机和挤压工作线第1部分挤压设备的安全性要求》.pdf

BS EN 1113-2015 Sanitary tapware Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 General technical specification《卫生设备水龙头 1型和2型供水系统用卫生设备水龙头的淋浴喷头通用技术.pdf

下载积分： 10000 积分

BS EN 1113-2015 Sanitary tapware Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 General technical specification《卫生设备水龙头 1型和2型供水系统用卫生设备水龙头的淋浴喷头通用技术.pdf

BS EN 1112-2008 Sanitary tapware - Shower outlets for sanitary tapware for water supply systems type 1 and type 2 General technical specification《卫生开关龙头 1型和2型供水系统用卫生开关龙头的淋浴出口通用技术规.pdf

下载积分： 10000 积分

BS EN 1112-2008 Sanitary tapware - Shower outlets for sanitary tapware for water supply systems type 1 and type 2 General technical specification《卫生开关龙头 1型和2型供水系统用卫生开关龙头的淋浴出口通用技术规.pdf

BS EN 1111-1999 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification《卫生用具龙头恒温混合阀(PN10) 一般技术规范》.pdf

下载积分： 10000 积分

BS EN 1111-1999 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification《卫生用具龙头恒温混合阀(PN10) 一般技术规范》.pdf

BS EN 1110-2010 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flow resistance at elevated temperature《防水柔性薄板屋面防水用薄沥青板高温度下耐流动性的测定》.pdf

下载积分： 10000 积分

BS EN 1110-2010 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flow resistance at elevated temperature《防水柔性薄板屋面防水用薄沥青板高温度下耐流动性的测定》.pdf

BS EN 1109-2013 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flexibility at low temperature《防水柔性薄板屋面防水用薄沥青板低温下柔性的测定》.pdf

下载积分： 10000 积分

BS EN 1109-2013 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing Determination of flexibility at low temperature《防水柔性薄板屋面防水用薄沥青板低温下柔性的测定》.pdf

BS EN 1108-2000 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes《防水柔性薄板屋面防水用薄沥青板循环温度.pdf

下载积分： 10000 积分

BS EN 1108-2000 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes《防水柔性薄板屋面防水用薄沥青板循环温度.pdf

BS EN 1107-2-2001 Flexible sheets for waterproofing - Determination of dimensional stability - Plastic and rubber sheets for roof waterproofing《防水柔性板尺寸稳定性的测定屋顶防水用橡胶和塑料薄板》.pdf

下载积分： 10000 积分

BS EN 1107-2-2001 Flexible sheets for waterproofing - Determination of dimensional stability - Plastic and rubber sheets for roof waterproofing《防水柔性板尺寸稳定性的测定屋顶防水用橡胶和塑料薄板》.pdf

BS EN 1107-1-2000 Flexible sheets for waterproofing - Determination of dimensional stability - Bitumen sheets for roof waterproofing《防水柔性薄板尺寸稳定性的测定屋面防水用的薄沥青板》.pdf

下载积分： 10000 积分

BS EN 1107-1-2000 Flexible sheets for waterproofing - Determination of dimensional stability - Bitumen sheets for roof waterproofing《防水柔性薄板尺寸稳定性的测定屋面防水用的薄沥青板》.pdf

BS EN 1106-2010 Manually operated taps for gas burning appliances《燃气器具的手动龙头》.pdf

下载积分： 10000 积分

BS EN 1106-2010 Manually operated taps for gas burning appliances《燃气器具的手动龙头》.pdf

BS EN 1104-2005 Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents《与食品接触的纸和纸板抗微生物成分转移的测定》.pdf

下载积分： 10000 积分

BS EN 1104-2005 Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents《与食品接触的纸和纸板抗微生物成分转移的测定》.pdf

BS EN 1103-2005 Textiles — Fabrics for apparel — Detailed procedure to determine the burning behaviour《纺织品服装织物燃烧性能的测定用详细程序》.pdf

下载积分： 10000 积分

BS EN 1103-2005 Textiles — Fabrics for apparel — Detailed procedure to determine the burning behaviour《纺织品服装织物燃烧性能的测定用详细程序》.pdf

BS EN 1101-1996 Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small f.pdf

下载积分： 10000 积分

BS EN 1101-1996 Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small f.pdf

BS EN 1097-9-2014 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres Nordic test《集料的机械和物理特性试验防滑钉轮胎耐磨.pdf

下载积分： 10000 积分

BS EN 1097-9-2014 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres Nordic test《集料的机械和物理特性试验防滑钉轮胎耐磨.pdf

BS EN 1097-8-2009 Tests for mechanical and physical properties of aggregates - Part 8 Determination of the polished nstone value《集料的机械和物理特性的试验第8部分抛光的石料值的测定》.pdf

下载积分： 10000 积分

BS EN 1097-8-2009 Tests for mechanical and physical properties of aggregates - Part 8 Determination of the polished nstone value《集料的机械和物理特性的试验第8部分抛光的石料值的测定》.pdf

BS EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7 Determination of the particle ndensity of filler — Pyknometer method《集料的机械和物理性质的试验第7部分使用比重计法.pdf

下载积分： 10000 积分

BS EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7 Determination of the particle ndensity of filler — Pyknometer method《集料的机械和物理性质的试验第7部分使用比重计法.pdf

BS EN 1097-6-2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption《集料的机械和物理性能试验颗粒密度和吸水性的测定》.pdf

下载积分： 10000 积分

BS EN 1097-6-2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption《集料的机械和物理性能试验颗粒密度和吸水性的测定》.pdf

BS EN 1097-5-2008 Tests for mechanical and physical properties of aggregates - Part 5 Determination of the water content by drying in a ventilated oven《集料的机械和物理特性试验第5部分用通风烘箱干燥法测定.pdf

下载积分： 10000 积分

BS EN 1097-5-2008 Tests for mechanical and physical properties of aggregates - Part 5 Determination of the water content by drying in a ventilated oven《集料的机械和物理特性试验第5部分用通风烘箱干燥法测定.pdf

BS EN 1097-4-2008 Tests for mechanical and physical properties of aggregates - Part 4 Determination of the voids of dry compacted filler《集料的机械和物理性质试验第4部分干燥压实填充料空隙率的测定》.pdf

下载积分： 10000 积分

BS EN 1097-4-2008 Tests for mechanical and physical properties of aggregates - Part 4 Determination of the voids of dry compacted filler《集料的机械和物理性质试验第4部分干燥压实填充料空隙率的测定》.pdf

BS EN 1097-3-1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids《集料的机械和物理特性试验松散体积密度和空隙率的测定》.pdf

下载积分： 10000 积分

BS EN 1097-3-1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids《集料的机械和物理特性试验松散体积密度和空隙率的测定》.pdf

BS EN 1097-2-2010 Tests for mechanical and physical properties of aggregates - Methods for the determination of resistance to fragmentation《集料的机械和物理特性试验抗碎裂性的测定方法》.pdf

下载积分： 10000 积分

BS EN 1097-2-2010 Tests for mechanical and physical properties of aggregates - Methods for the determination of resistance to fragmentation《集料的机械和物理特性试验抗碎裂性的测定方法》.pdf

BS EN 1097-11-2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates《集料的机械和物理特.pdf

下载积分： 10000 积分

BS EN 1097-11-2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates《集料的机械和物理特.pdf

BS EN 1097-10-2014 Tests for mechanical and physical properties of aggregates Determination of water suction height《集料的机械和物理特性的试验吸水高度的测定》.pdf

下载积分： 10000 积分

BS EN 1097-10-2014 Tests for mechanical and physical properties of aggregates Determination of water suction height《集料的机械和物理特性的试验吸水高度的测定》.pdf

BS EN 1097-1-2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)《集料的机械和物理特性的试验耐磨性的测定(微型-台佛尔)》.pdf

下载积分： 10000 积分

BS EN 1097-1-2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)《集料的机械和物理特性的试验耐磨性的测定(微型-台佛尔)》.pdf

共 32716 条/ 818 页

首页上一页...584 585586587 588...下一页尾页

关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1

收起

展开

QQ交谈