NEMA NTCIP 1205-2001 National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control (v01 08)《国家运输ITS通信协议 闭路电视摄像机控制器目.pdf

《NEMA NTCIP 1205-2001 National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control (v01 08)《国家运输ITS通信协议 闭路电视摄像机控制器目.pdf》由会员分享，可在线阅读，更多相关《NEMA NTCIP 1205-2001 National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control (v01 08)《国家运输ITS通信协议 闭路电视摄像机控制器目.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 1205:2001 v01.08National TransportationCommunications for ITS ProtocolObj

2、ect Definitions for Closed Circuit Television (CCTV) Camera ControlA Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMA NTCIP 1205:2001 v01.08 National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control

3、December 2001 Published by American Association of State Highway and Transportation Officials (AASHTO)444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE)1099 14th Street, N.W., Suite 300 West Washington, D.C. 20005-3438 National Electrical Man

4、ufacturers Association (NEMA)1300 North 17th Street, Suite 1847 Rosslyn, Virginia 22209-3801 2001 AASHTO / ITE / NEMA. All rights reserved. 2001 AASHTO / ITE / NEMA 2001 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE

5、), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction in whole or in part in any form, translation into other languages and display are reserved by the copyright owners under the laws of the United

6、 States of America, the Universal Copyright Convention, the Berne Convention, and the International and Pan American Copyright Conventions. Except for the MIB or the PRL, do not copy without written permissionof either AASHTO, ITE, or NEMA. NTCIP 1205:2001 v01.08 Page i 2001 AASHTO / ITE / NEMA Do N

7、ot Copy Without Written Permission ACKNOWLEDGEMENTS This publication was prepared by the NTCIP CCTV Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Tran

8、sportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). The Joint Committee on the NTCIP consists of six representatives from each of the standards organizations, and provides guidance for NTCIP development. At the

9、 time that this document was prepared, the following individuals were active members of the NTCIP CCTV Working Group: Joseph Bowman Mike Forbis (Chair) G. Curtis Herrick John McDonough Emmanual Morala Bruce Pluth Stephen L. Robinson Canny Quach Shahram Shahriari Phillip Tran Keith Vennel In addition

10、 to the many volunteer efforts, recognition is also given to those organizations that supported the efforts of the NTCIP CCTV Working Group by providing comments and resources for the development of the standard, including: California Department of Transportation Cohu, Inc. Diamond Electronics, Inc.

11、 Federal Highway Administration Gardner Transportation Systems, Inc. Gyyr, Inc. Image Sensing Systems, Inc. Los Angeles Department of Transportation Ontario Ministry of Transportation Pelco, Inc. Sensormatic Electronics Corporation Washington State Department of Transportation NTCIP 1205:2001 v01.08

12、 Page ii Do Not Copy Without Written Permission 2001 AASHTO / ITE / NEMA FOREWORD This document uses only metric units. This document defines the Closed Circuit Television (CCTV) data elements, or objects, that are supported by the NTCIP. The text includes an extended glossary in Annex A that is def

13、ined as informative. For more information about NTCIP standards, visit the NTCIP Web Site at http:/www.ntcip.org. For a hardcopy summary of NTCIP information, contact the NTCIP Coordinator at the address below. In preparation of this NTCIP document, input of users and other interested parties was so

14、ught and evaluated. Inquiries, comments, and proposed or recommended revisions should be submitted to: NTCIP Coordinator National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847 Rosslyn, VA 22209-3801 fax: (703) 841-3331 e-mail: ntcipnema.org Approvals This document was separ

15、ately balloted and approved by AASHTO, ITE, and NEMA after recommendation by the Joint Committee on the NTCIP. Each organization has approved this standard as the following standard type, as of the date: AASHTO Standard Specification; February 2001 ITE Software Standard; May 2001 NEMA Standard; July

16、 2001 History From 1997 to 1999, this document was referenced as TS 3.CCTV. However, to provide an organized numbering scheme for the NTCIP documents, this document is now referenced as NTCIP 1205. The technical specifications of NTCIP 1205 are identical to the former reference, except as noted in t

17、he development history below: TS 3.CCTV v98.01.03. August 1998 Accepted as a User Comment Draft by the Joint Committee on the NTCIP. October 1998 Distributed by NTCIP Standards Bulletin B0028 for user comment. NTCIP 1205 v01.07. July 1999 Version 01.06 accepted as a Recommended Standard by the Joint

18、 Committee on the NTCIP. August 2000 Version 01.07 attached to NTCIP Standards Bulletin B0055 included typographic corrections. Approved by AASHTO in February 2001, approved by ITE in May 2001, and approved by NEMA in July 2001. NTCIP 1205:2001 v01.08, December 2001. January 2002 Formatted for print

19、ing: updated title page date and version number; and revised front matter to conform to NTCIP 8002. All references to TS 3 standard numbers were changed to equivalent NTCIP standard numbers. NTCIP 1205:2001 v01.08 Page iii 2001 AASHTO / ITE / NEMA Do Not Copy Without Written Permission INTRODUCTION

20、The purpose of this document is to define the Closed Circuit Television (CCTV) Camera Control objects that are supported by the NTCIP. The following keywords apply to this document: AASHTO, ITE, NEMA, NTCIP, CCTV, camera control, objects. In 1992, the NEMA 3-TS Transportation Management Systems and

21、Associated Control Devices Section began the effort to develop the NTCIP. The Transportation Sections purpose was to respond to user needs to include standardized systems communication in the NEMA TS 2 standard, Traffic Controller Assemblies. Under the guidance of the Federal Highway Administrations

22、 NTCIP Steering Group, the NEMA effort was expanded to include the development of communications standards for all transportation field devices that could be used in an Intelligent Transportation Systems (ITS) network. In September 1996, an agreement was executed among AASHTO, ITE, and NEMA to joint

23、ly develop, approve, and maintain the NTCIP standards. Under the guidance of the Joint AASHTO/ITE/NEMA Committee on the NTCIP, a Working Group was formed to develop the object definitions for Closed Circuit Television camera control. The CCTV WG first met in August 1997. The NTCIP Object Definitions

24、 for Closed Circuit Television (CCTV) Camera Control defines objects in ASN.1 using the SNMP Object Type Macro for devices that sense the presence or similar characteristics of vehicles. These definitions are intended for CCTV camera control devices. NTCIP 1205:2001 v01.08 Page iv Do Not Copy Withou

25、t Written Permission 2001 AASHTO / ITE / NEMA If you are not willing to abide by the following notices, return these materials immediately. Joint AASHTO, ITE, and NEMA NTCIP Management Information Base and Data Dictionary DISTRIBUTION NOTICE To the extent and in the limited event these materials are

26、 distributed by AASHTO/ITE/NEMA in the form of a Management Information Base (“MIB”) or Data Dictionary and ASN.1 Script (“DD”), AASHTO / ITE / NEMA extends the following permissions: (i) you may make and/or distribute unlimited copies (including derivative works) of the MIB, including copies for co

27、mmercial distribution, provided that (a) each copy you make and/or distribute contains this Notice and (b) each derivative work of the MIB uses the same module name followed by “-,” followed by your Internet Assigned Number Authority (IANA)-assigned enterprise number; (ii) use of the MIB is restrict

28、ed in that the syntax field may be modified only to reflect a more restrictive subrange or enumerated values; (iii) the description field may be modified but only to the extent that: (a) only those bit values or enumerated values that are supported are listed; and (b) the more restrictive subrange i

29、s expressed. These materials are delivered “AS IS” without any warranties as to their use or performance. AASHTO / ITE / NEMA AND THEIR SUPPLIERS DO NOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THESE MATERIALS. AASHTO/ITE/NEMA AND THEIR SUPPLIERS MAKE NO WARRANTIES, EXPRESS OR IMPL

30、IED, AS TO NONINFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL AASHTO, ITE, OR NEMA OR THEIR SUPPLIERS BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY CLAIM OR FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR

31、 LOST SAVINGS, ARISING FROM YOUR REPRODUCTION OR USE OF THESE MATERIALS, EVEN IF AN AASHTO, ITE, OR NEMA REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states or jurisdictions do not allow the exclusion or limitation of incidental, consequential, or special damages, or the

32、exclusion of implied warranties, so the above limitations may not apply to you. Use of these materials does not constitute an endorsement or affiliation by or between AASHTO, ITE, or NEMA and you, your company, or your products and services. DisclaimerThe information in this publication was consider

33、ed technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. AASHTO, ITE, and NEMA sta

34、ndards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. Wh

35、ile AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the development of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained

36、 in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application

37、, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, express or implied, as to the accuracy or completeness of NTCIP 1205:2001 v01.08 Page v 2001 AASHTO / ITE / NEMA Do Not Copy Without Written Permission any information published herein, and disclaims and

38、 makes no warranty that the information in this document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and ma

39、king this document available, AASHTO, ITE, and NEMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rel

40、y on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the

41、user may wish to consult for additional views or information not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the contents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or in

42、stallations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to AASHTO, ITE, or NEMA and is solely the responsibility of the certifier or maker of the statement. NTCIP is a tradem

43、ark of AASHTO / ITE / NEMA NTCIP 1205:2001 v01.08 Page vi Do Not Copy Without Written Permission 2001 AASHTO / ITE / NEMA NTCIP 1205:2001 v01.08 Page vii 2001 AASHTO / ITE / NEMA Do Not Copy Without Written Permission CONTENTS Section 1 CCTV OVERVIEW1-11.1 Introduction to CCTV.1-11.2 Benefits of Sta

44、ndardization .1-11.3 Existing Standards 1-21.3.1 Internet Standards1-31.3.2 International Organization of Standardization Standards.1-31.3.3 NTCIP 1-31.3.4 NTCIP System Design .1-31.4 Closed Circuit Television.1-41.4.1 Discussion of CCTV Coordinate Systems .1-41.4.2 Discussion of Limit Stops in CCTV

45、 Systems .1-6Section 2 GENERAL.2-12.1 Scope2-12.2 References2-12.2.1 Normative References .2-12.2.2 Other References.2-22.2.3 Contact Information2-22.3 Terms2-22.4 Acronyms 2-42.5 Supplemental figures 2-5Section 3 CCTV MIB.3-13.1 Closed Circuit Television (CCTV) Objects3-13.2 CCTV Range Objects .3-2

46、3.2.1 Maximum Number of Presets Parameter 3-23.2.2 Pan Left Limit Parameter .3-23.2.3 Pan Right Limit Parameter.3-23.2.4 Pan Home Position Parameter 3-23.2.5 True North Offset Parameter .3-33.2.6 Tilt Up Limit Parameter 3-33.2.7 Tilt Down Limit Parameter3-33.2.8 Zoom Limit Parameter .3-33.2.9 Focus

47、Limit Parameter.3-43.2.10 Iris Limit Parameter3-43.2.11 Maximum Pan Step Angle Parameter3-43.2.12 Maximum Tilt Step Angle Parameter .3-43.3 CCTV Timeout Objects.3-43.3.1 Pan Timeout Parameter.3-43.3.2 Tile Timeout Parameter .3-53.3.3 Zoom Timeout Parameter3-53.3.4 Focus Timeout Parameter .3-53.3.5 I

48、ris Timeout Parameter 3-53.4 CCTV Preset Objects3-53.4.1 Go to Preset Position Parameter .3-63.4.2 Store Preset Position Parameter .3-63.5 CCTV Positioning Objects 3-63.5.1 Pan Position Parameter .3-63.5.2 Tilt Position Parameter.3-63.5.3 Lens Zoom Position Parameter .3-73.5.4 Lens Focus Position Pa

49、rameter.3-73.5.5 Lens Iris Position Parameter3-7NTCIP 1205:2001 v01.08 Page viii Do Not Copy Without Written Permission 2001 AASHTO / ITE / NEMA 3.6 CCTV System Feature Control Objects3-73.6.1 System Camera Feature Control Parameter .3-83.6.2 System Camera Feature Status.3-83.6.3 System Camera Equipment Availability Parameter .3-83.6.4 System Lens Feature Control Parameter 3-93.6.5 System Lens Feature Status Parameter3-93.6.6 System Lens Equipment Availability Parameter 3-93.7 CCTV Alarm Objects.3-93.7