NAVY MIL-M-29532-1988 MASTER LIBRARY DATA ELEMENTS (FOR TECHNICAL PUBLICATIONS)《主库数据元件(用于技术文件)》.pdf

《NAVY MIL-M-29532-1988 MASTER LIBRARY DATA ELEMENTS (FOR TECHNICAL PUBLICATIONS)《主库数据元件(用于技术文件)》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-M-29532-1988 MASTER LIBRARY DATA ELEMENTS (FOR TECHNICAL PUBLICATIONS)《主库数据元件(用于技术文件)》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、?- MIL-M-29532 Til 9999906 Oqh2L90 O I NOT MEASUREMENT 1 SENSITIVE M I L-M -29532( E C) 28 OCTOBER 1988 NAVY M I LITARY SPEC I FICATIO N MASTER LIBRARY DATA ELEMENTS (FOR TECHNICAL PUBLICATIONS) Published by direction of Commander, Space and Naval Warfare Systems Command AMSCNM AREA TMSS Provided by

2、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-U-27532 TU W 9799906 OLih219L 2 W Use the form provided in the rear of this specification. NAVY MILITARY SPECIFICATION MASTER UBRARY DATA ELEMENTS FOR TECHNICAL PUBLICATIONS 1.0 SCOPE 1.1 Scope. This Navy Mil

3、itary Specification provides a uniform set of data elements necessary to track and control information in Navy technical publications at the master library level. The Specification provides a schema to index technical publications and to interchange indexed technical publications between contractors

4、, Navy technical data repositories, and the Navy user community. This Specification is applicable to technical publications, which have either been converted to digital format through scanning of existing publications or created directly on an automated document processing system (.e. word processor

5、, authoring system). The Specification defines a logical file structure which will permit interchange by magnetic tape, diskette, or optical media. The basic requirement is that the interchange medium support a file structure. 1.2 Application. This Specification is applicable to the following class

6、of technical data: Class I - Technical publications and technical manuais including change pages AMSC NIA AREA TMSS DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.0

7、 APPLICABLE DOCUMENTS 2.1 Sm?clfcatlons, Standards, and Handbooks. The following specifications and standards form a part of this Specification to the extent specified herein. Unless specified otherwise, the issuer of these documents shall be those listed in the issue of the Department of Defense In

8、dex of Speci- fications and Standards (OODISS) and supplements thereto, cited in the solicitation. MILITARY STANDARDS MI L-STD- 1 84OA Automated Interchange of Technical Information FEDERAL STANDARDS FE D-STD- 1064 Telecommuncatons: General Aspects of Group 4 Facsimile FED-STD-1065 Telecommunication

9、s: Facsimile Coding Schemes and Coding Control Functions for Group 4 Facsimile Apparatus MILITARY SPECIFICATIONS M IL-D-28000 Digital Representation for Communication of Product Data: Application Subsets IV1 i L-MI-280U I Miirkup Requiiwiwrits ui*d Gei-ieric 59yle Irptx,ftwtiori for tiectiuw Printed

10、 Output and Exchange of Text 2.2 Other Government Documents and Publications. The following other Government documents, drawings, and publications form a part of this Specification to the extent specified herein. FIPS PUB 79 Magnetic Tape Labels and File Structure for Information Interchange FIPS PU

11、B 128 Computer Graphics Metafile (CGM) (ANSI X3.122) ANSI 14.26M initial Graphics Exchange Specification (ICES) NAVMAT Instruction 4160.1 Standard Technical Manual Identification Memory System 2.3 Order of Precedence. In the event of a conflict between the text of this Specification and the referenc

12、es cited herein, the text of this Specification shall take precedence. 2.4 Sources of Documents. Copies of the referenced federal and military specifications and standards are available from the Department of Defense Single Stock Point, Commanding Officer, Navy Publicatiovir and Farnis Center (NPFC)

13、, 5801 Tabor Avenue, Philadelphia, PA 19120. For specific acquisition functions, these documents should be obtained from the contracting activity or as directed by the contracting activity. FIPS PUB documents are available to government agencies only from NPFC; non-governmental availability is from

14、the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. ANSI X3.122 and ANSI 14.26M can be obtained from American National Standards Institute, 1430 Broadway, New York, NY 10081 or from NPFC Phi lad el pli i a. 2- I Provided by IHSNot for ResaleNo reproduction or net

15、working permitted without license from IHS-,-,-MIL-M-27532 TM E 7777306 0462373 6 m MIL-M-29532( EC) 3.1 General Indexina and Retrieval Reauirements. The operational user of technical manuals and publications requires ease of ability to locate specific technical information contained in a given tech

16、nical manual. The user should be able to randomly access the following information elements, which must be indexed accordingly: - a given document (in a library sense) - the cover of the given technical manual - the list of effective pages - the record of changes - the promulgation letter - the tabl

17、e of contents - the list of illustrations .-a the list of tables - the document index (if the document contains one) - a given table - a given figure (or foldout) - agivenpage - a given paragraph or sub-paragraph - warnings and cautions At the current time, indexing for keywords and key phrases, out

18、side of that already contained in an existing hardcopy clocurnent iridex (if the document Lotitaii7s orre), IS riot rieeded for the scariried pages. Therefore, there is no current requirement for explicit content tagging. This Specification supports hypertext search and retrieval mechanisms (.e., no

19、n-linear text), as well as emerging auto- indexing and auto-tagging concepts. 3.2 SiJecification ConcePt. Figure 3-1 depicts the logical file structure for the interchange of technical manual scanned information. The file structure is consistent with magnetic tapes as defined in MIL-STD-l840A, but i

20、s extensible to random access magnetic and optical storage media. Far a given technical publication on any given technical inforrnation exchange medium, there shall be: - a Document Declaration File (per MIL-STD-1840A) with data entered into specific records. The Document Declaration File is require

21、d by MIL-STD-1840A. MIL-STD-1840A defines the block length for magnetic tape. In this Specification, several records in the Document Declaration File have been broadened in scope and further defined to contain document-level data elements. Additionally, this Specification extends the indexing of MIL

22、-STD-1840A to allow a particular record tag to be used more than once (.e., duplicated). There shall be one Document Declaration File for each technical publication contained on the exchange medium. Document-level indexing information contained within the Document Declaration File will be assimilate

23、d into the master library. -at least one Data File (and likely many data files) which contain the information content of the technical publication. Per MIL-STD-I840A, data files may contain: SCML-tagged (Standard Generalized Markup Language) text, a Document Type Definition (DTD) containing no telit

24、uai data, an output specification for a targeted composition or electronic display system, IGES data (Initial Graphics Exchange Specification), a raster image, CGM data (Computer Graphics Metafile), special word files, Page Description Language (PDL) data, and Grey-Scale (or halftone) data. Each dat

25、a file shall have identifying header records. This Specification defines the data file header records in greater detail than MIL-STD-140A. Specifically, the “notes” record in the data files has been broadened in scope and further defined to contain data elements for the technical information content

26、 conveyed in the data file. Also, this Specification extends MIL-STD-184A to allow duplication of header records. Duplicated header records will be added at the end of the core e 3- 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-O FILE STRUCTURE D

27、OCUMENT DECLARATION FILE (DOCUMENT 1) (CONTAINS HEADER RECORDS AND INDEXING ELEMENTS) (DEFINED IN MIL-STD-1840A) DOCUMENT DECLARATION FILE (DOCUMENT 2) i THROUGH ”n” DOCUMENTS TRANSMITTED 6 START DOC 1 1. CONTIGUOUS COLLECTION OF FILES WHICH COMPRISE DOCUMENT 1 SGM1.-TAGGED TEXT FILES DTD FILES OUTP

28、UT SPECIFICATION FILES ICES FILES RASTER FILES CGM FILES SPECIAL WORD FILES PDL FILES GREY-SCALE FILES FLEXIBLE AND EXTENSIBLE MIX OF INTELLIGENT AND COMPRISING THE DOCUMENT C NON-INTELLIC ENT FILES 2. 4 SPECIFICATION EACH FILE HAS HEADER RECORDS AND INDEXING ELEMENTS DEFINED IN MIL-STD-1840AAND IN

29、THIS START DOC 2 CONTIGUOUS COLLECTION OF FILES WHICH COMPRISE DOCUMENT2 a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-27532 TM = 777770b OqbZL75 T MIL-M-29532( EC) records required by MIL-STD-1840A and in the same order as the core records

30、. This indexing information is intended to be assimilated into the master library. 3.3 ocument Declaration File. For magnetic tape, the Document Declaration File shall be the first file on the medium. For media which support random access, the Document Declaration File shall contain data elements wh

31、ich point to the data files which comprise the document. Each record within the Document Declaration File has a dedicated use, and each record is required. For magnetic tape, the Declaration File shall precede the data files of the document. Per MIL-STD-1 WOA, if more than one document is contained

32、on the magnetic tape, all of the declaration files shall be grouped at the beginning of the sequence of files in order to facilitate locating specific documents. For mag- netic tape, the group of text and illustration files (Le., the data files) which constitute a specific document may be in any ord

33、er, but the group shall be contiguous. Restrictions on physical file order of the Document Declaration File and associated data files do not apply to random access media. As currently defined in MIL-STD-1841)A. the Documsnt Declaration Filo contains some (but not all) record definitionswhich are nee

34、ded for indexing and retrieval at the master library level. Per MIL- STD-11540A, the Document Declaration File contains both a Declaration File Name and Declaration File Data. All of the data written in the Document Declaration File shall be in ASCII character format. The records shall be ANSI Type

35、D variable- length records with a maximum record length of 256 bytes (and block lengths of 2048 bytes for magnetic tape). MIL-STD-1840A currently intends that the detailed content ancl format of information appearing in the Document Dedaration File be specified by contract or other agreement prior t

36、o actual transmission of documents. Indexing information contained in the Document Declaration File described in MIL-STD-1840A currently includes: - Declaration File Name - Character string identifying the source system - Source system doCriInnt identifier - Source system related document identifier

37、 - Highest revision, change level, and date in the document - Date of issue of the latest change to the document - Character string identifying the destination system - Destination system document identifier - Destination system related document identifier - Date of transfer - Delivery accounting ch

38、aracter string (e.g., CDRLs, contract numbers) - Filecount - Title security label - Document security label - Document type - Document title The Document Declaration File shall contain “high-level“ information about each of the technical publications which are contained on the interchange media. Thi

39、s information ir intended to be absorbed into technical data repository library systems for the purpose of storing and retrieving the digitized technical publication. Within this Specification, the “delivery accounting character string“ record (dlvacc:) is further defined to provide additional requi

40、red data elements for technical publications. MIL-STD- 184A states that this record is a free form record which can pass additional information as further specified. Details regarding data elements to be contained in the Document Declaration File are discussed in Appendix A of this Specification. Th

41、is Specification adds additional data elements for the National Stock Number, Issuing Activity, Contracts Deliverable Requirements List (CDRL) number, Contract Number, system/equipment type to which document refers, security, volume/part, and a schema for relating this document to other documents (i

42、ncluding change pages). 3-3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.4 Data Files MIL-STD- 1840A standardizes the interchange of several different types of data files (e.g., SGML-tagged ASCII text, CGM, IGES, raster, PDL). MIL-STD-1840A stat

43、es that each data file shall have identifying header records. These header records provide some (but not all) data elements which are required for interactive storage and retrieval of the file. This Specification defines the data file header records in greater detail than MIL-STD-1840A. Specifically

44、, the “notes“ record (notes:) has been extended to contain additional data elements for the information content conveyed in the data file. The indexing information in the data file header records is intended to be assimilated in the master library. This Specification assumes that the technical publi

45、cation to be interchanged will be comprised of a cost effective blend of intelligent data files (Le., SGML-tagged ASCII text and entity graphics) and non-intelligent data files (Le., raster images). This Specification can accommodate virtually any ratio of intelligent to non-intelligent data files.

46、3.4.1 Textual Data Filet. MIL-ST-1840A provides for the interchange of SGML-tagged ASCII text data files. The basic DOD SGML tagging set is defined in MIL-M-28001. Sections of the technical publication tobe intelligently xanmsd will be identified in individual contract delivery orders or by user req

47、uest in the case of interchange between Government activities. Thus, the entire document or a critical minimum number of defined sections and pages may be intelligently scanned (through optical character recognition and raster-to-vector conversion). For sections and pages which are intelligently sca

48、nned, this Specification requires that they undergo rigorous quality assurance tests to ensure 100-percent accuracy. To permit user-friendly interactive technical information retrieval, display, and print-on-demand, this Specification requires that a critical minimum number of technical publication

49、sections be iritelligently scartried arid SGML-Lagged. At il minirviuiii, seclioris of the technical publicalion which shall be intelligently scanned will include: - the Table of Contents - the List of Illustrations - the List of Tables - the Technical Manual Index (if the technical manual has one) Additionally, if the document to be transmitted is change material only, this Specification requires that the “Instruction Sheet“ also be intelligently scanne