ITU-R BT 2023-2012 Performance requirements for the production international exchange and broadcasting of 3DTV programmes《3D电视制作生产 国际交换和广播的性能要求》.pdf

《ITU-R BT 2023-2012 Performance requirements for the production international exchange and broadcasting of 3DTV programmes《3D电视制作生产 国际交换和广播的性能要求》.pdf》由会员分享，可在线阅读，更多相关《ITU-R BT 2023-2012 Performance requirements for the production international exchange and broadcasting of 3DTV programmes《3D电视制作生产 国际交换和广播的性能要求》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 Recommendation ITU-R BT.2023(08/2012)Performance requirements for the production, international exchangeand broadcasting of 3DTV programmesBT SeriesBroadcasting service(television)ii Rec. ITU-R BT.2023 Foreword The role of the Radiocommunication Sector is to ensure the rational, equitable, efficien

2、t and economical use of the radio-frequency spectrum by all radiocommunication services, including satellite services, and carry out studies without limit of frequency range on the basis of which Recommendations are adopted. The regulatory and policy functions of the Radiocommunication Sector are pe

3、rformed by World and Regional Radiocommunication Conferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Property Right (IPR) ITU-R policy on IPR is described in the Common Patent Policy for ITU-T/ITU-R/ISO/IEC referenced in Annex 1 of Resolution ITU-R 1. Form

4、s to be used for the submission of patent statements and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents/en where the Guidelines for Implementation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC and the ITU-R patent information database can also be

5、 found. Series of ITU-R Recommendations (Also available online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for production, archival and play-out; film for television BS Broadcasting service (sound) BT Broadcasting service (television) F Fixed service M Mobile,

6、 radiodetermination, amateur and related satellite services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite service SA Space applications and meteorology SF Frequency sharing and coordination between fixed-satellite and fixed service systems SM Spectrum managem

7、ent SNG Satellite news gathering TF Time signals and frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation was approved in English under the procedure detailed in Resolution ITU-R 1. Electronic Publication Geneva, 2012 ITU 2012 All rights reserved. No part o

8、f this publication may be reproduced, by any means whatsoever, without written permission of ITU. Rec. ITU-R BT.2023 1 RECOMMENDATION ITU-R BT.2023 Performance requirements for the production, international exchange and broadcasting of 3DTV programmes (2012) Scope This Recommendation specifies the p

9、erformance requirements and criteria that should be used worldwide for the production, international exchange and broadcasting of stereoscopic 3DTV1programmes. This Recommendation includes references to some of the production requirements necessary to achieve a comfortable, high quality 3DTV viewing

10、 experience. The ITU Radiocommunication Assembly, considering a) that since programme producers and broadcasters are producing 3DTV programmes for domestic broadcasting and for international programme exchange using existing ITU-R monoscopic Recommendations contained in the current standards, there

11、is a need to develop a set of ITU-R Recommendations to be used worldwide in the production of 3DTV programmes for broadcasting, to facilitate their international exchange; b) that 3DTV broadcasters, programme producers and distributors often need to preserve the value and quality of their programmes

12、 for television broadcast use and therefore they have an interest in protecting their programmes from technical obsolescence; c) that a 3DTV audience with normal binocular2vision expects to have a comfortable viewing experience for the duration of the programme; d) that visual comfort and quality of

13、 3DTV images is influenced by ranges of parallax distributions, as well as other factors including programme production techniques, display devices, 3D glasses and viewing conditions; e) that the overall performance requirements for a 3DTV system need to be identified in sufficient detail in order t

14、o orient the choice of the appropriate technologies for its implementation; f) that 3DTV programmes need to be converted to monoscopic TV with a quality adequate for distribution, noting a) that television image processing techniques have developed to the point where the technical solutions applicab

15、le to the video signal in the production of 3DTV television programmes for international exchange do not need to necessarily coincide with the solutions applicable to the broadcast emission of 3DTV television programmes to a television audience; b) that 3DTV presently requires two separate views of

16、the same subject: the Left eye (Le) and Right eye (Re), and that once captured, they must be processed, carried and stored in such a way that no errors are introduced that might affect one signal more than, or differently from the other, including the relative timing of the two signals, 1In the cont

17、ext of this Recommendation, the term 3DTV is used to convey a stereoscopic image or image pair. 2Binocular vision can vary depending on the physical characteristics of individual viewers. 2 Rec. ITU-R BT.2023 recommends 1 that the performance requirements and criteria listed in Annex 1 should be tak

18、en into account when determining the appropriate technologies for a 3DTV system for production, international programme exchange and broadcasting. NOTE The list of performance requirements and criteria in Annex 1, albeit quite comprehensive, should be reviewed and possibly extended as necessary to r

19、eflect technological progress, improved knowledge of human visual perception and audience preferences concerning implementations of 3DTV presentations. Annex 1 Performance requirements for the production, international exchange and broadcasting of 3DTV programmes The performance requirements and cri

20、teria listed below should be taken into account when determining the appropriate technologies for a 3DTV broadcasting system. 1 The viewing experience provided by a 3DTV broadcasting service should be at least equal to, and preferably represent an improvement over, the experience provided by full-qu

21、ality monoscopic broadcasting without being inferior to it in any aspect. 2 The use of existing technical solutions should be encouraged where feasible, when identifying optimal specifications for a 3DTV television programme production and broadcasting system based on existing ITU-R Recommendations.

22、 3 For the production of 3DTV television programmes for international exchange: it is desirable that there is a single set of image and sound specifications for each ITU-R television system used for the production of 3DTV television programmes for international exchange; it is important for broadcas

23、ters, programme producers and distributors to use audio and video systems selected among those that provide the best technical and perceptual sound and picture quality, thus preserving the value and technical quality of their programmes in view of their future re-use; it would be beneficial if progr

24、ammes produced for 3DTV television broadcasting could be easily adapted for broadcasting as monoscopic programmes without a loss other than depth information, at a technical quality adequate to those forms of distribution. 4 For the broadcasting of 3DTV television programmes to the general public: a

25、 certain degree of backward interoperability of a new 3DTV broadcasting service with existing digital television broadcasting services should desirably be preserved3; 3This is likely to be the overriding consideration in the initial phase of introduction of a 3DTV television broadcasting service. Re

26、c. ITU-R BT.2023 3 in the current scarcity of broadcast spectrum, the source coding and the channel coding used for the emission of a 3DTV television broadcasting system should make efficient use of channel capacity and spectrum, with the aim to accommodate the highest possible quality 3DTV broadcas

27、ting service within the emission bandwidths and channel capacity currently allocated to terrestrial and satellite broadcasting services; in the case of a 3DTV broadcasting system that is intended to allow for the compatible reception of monoscopic signals, the additional signal coding required to convey the extra information needed for 3DTV should as far as possible, cause no perceivable degradation to the monoscopic television presentation. _