BS ISO 8122-2003 Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter《纺织机械 针织机 大标称直径圆形针织机的针数》.pdf

《BS ISO 8122-2003 Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter《纺织机械 针织机 大标称直径圆形针织机的针数》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 8122-2003 Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter《纺织机械 针织机 大标称直径圆形针织机的针数》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 8122:2003 Textile machinery Knitting machines Number of needles for circular knitting machines of large nominal diameter ICS 59.120.40 BS ISO 8122:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 25 June 2003 BSI 2

2、5 June 2003 ISBN 0 580 42137 6 National foreword This British Standard reproduces verbatim ISO 8122:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: A list of o

3、rganizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence

4、Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself

5、confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and prom

6、ulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued

7、. Amendments issued since publication Amd. No. Date Comments Reference number ISO 8122:2003(E)INTERNATIONAL STANDARD ISO 8122 Second edition 2003-06-01 Textile machinery Knitting machines Number of needles for circular knitting machines of large nominal diameter Matriel pour lindustrie textile Machi

8、nes tricoter Nombre daiguilles pour les machines tricoter circulaires de grand diamtre nominal BSISO8122:2003ii BSISO8122:2003 iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Intern

9、ational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with

10、 ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical

11、 committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to

12、the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8122 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial la

13、undering, Subcommittee SC 3, Machinery for fabric manufacturing including preparatory machinery and accessories. This second edition cancels and replaces the first edition (ISO 8122:1988), which has been technically revised. BSISO8122:2003blankINTENRATIONAL TSANDADR IS:2218 O3002(E)I SO 3002 All irh

14、gts seredevr 1Textile machinery Knitting machines Number of needles for circular knitting machines of large nominal diameter 1 Scope This International Standard specifies the usual number of needles for single-face, double-face and “links-links” circular knitting machines of large nominal diameter,

15、in terms of the needle pitch or gauge E and the machine nominal diameter, and is able to be used as a basis for the comparison of fabrics knitted on these machines. It is not applicable to circular knitting machines with a selection of single needles. 2 Normative references The following referenced

16、documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8117, Textile machinery Knitting machines Nominal diameters of circula

17、r machines ISO 8188, Textile machinery and accessories Pitches of knitting machine needles ISO 7839, Textile machinery and accessories Knitting machines Classification and vocabulary 3 Terms, definitions and classification For the purposes of this document, the terms, definitions and classification

18、given in ISO 7839 apply. 4 Number of needles 4.1 General The numerical designations of the nominal diameters of circular knitting machines and the needle pitches shall be in accordance with ISO 8117 and ISO 8188. To determine the usual number, N u(rounded number), of needles for circular knitting ma

19、chines of large nominal diameter from the theoretical number, N t , of needles, take, as the divisor, a) 12, for machines with nominal diameters u 508 mm, and b) 24, for machines with nominal diameters 508 mm. The deviation from the theoretical number of needles shall not exceed 3 9 + in the case of

20、 a) and 6 18 + for b). NOTE 1 The usual number (rounded) of needles is therefore a multiple of 12 or 24 that occurs in the fixed tolerance interval for the theoretical number of needles, i.e. 3 9 + or 6 18 + . BSISO8122:20031IS:2218 O3002(E) 2 I SO 3002 All irhgts seredevrNOTE 2 Larger deviations fr

21、om the theoretical number of needles can occur in the case of machines with a selection of single needles. 4.2 Calculation The theoretical number of needles, N t , of a needle carrier is obtained using the following formula: N t= d c E where = 3,141 592 7; d cis the designation for the nominal diame

22、ter of the knitting machine; E is the gauge. The usual number, N u , of needles (see Table 1) is the rounded number according to 4.1. EXAMPLE The theoretical number of needles for a knitting machine with a numerical designation d c= 18 and a gauge of E = 24 is N t= 18 3,141 592 7 24 = 1 357,168 The

23、usual number of needles is therefore in the range of 1 348,168 to 1 360,168 (i.e. 1 357,168 3 9 + ) and, in this example (using 12 as the divisor), is 1 356. BSISO8122:20032IS:2218 O3002(E) I SO 3002 All irhgts seredevr 3 Table 1 Usual number of needles, N uNeedle pitch Gauge Nominal diameter, mm (d

24、esignation d c , in) t mm E 177,8 (7) 190,5 (7,5) 203,2 (8) 228,6 (9) 254 (10) 279,4 (11) 304,8 (12) 330,2 (13) 355,6 (14) 381 (15) 406,4 (16) 431,8 (17) 457,2 (18) 482,6 (19) 508 (20) 533,4 (21) 558,8 (22) 584,2 (23) 609,6 (24) 0,508 50 1092 1176 1248 1416 1572 1728 1884 2040 2196 2352 2508 2664 28

25、20 2988 3144 3288 3456 3600 3768 0,529 48 1056 1128 1200 1356 1500 1656 1812 1956 2112 2256 2412 2556 2712 2868 3012 3168 3312 3456 3624 0,552 46 1008 1080 1152 1296 1440 1584 1728 1872 2016 2160 2304 2460 2604 2748 2892 3024 3168 3312 3456 0,577 44 960 1032 1104 1236 1380 1524 1656 1800 1932 2076 2

26、208 2352 2484 2628 2760 2904 3024 3168 3312 0,605 42 924 984 1056 1188 1320 1452 1584 1716 1848 1980 2112 2244 2376 2508 2640 2760 2904 3024 3168 0,635 40 876 936 1008 1128 1260 1380 1500 1632 1752 1884 2004 2136 2256 2388 2508 2640 2760 2880 3000 0,668 38 828 888 948 1068 1188 1308 1428 1548 1668 1

27、788 1908 2028 2148 2268 2388 2496 2616 2736 2856 0,706 36 792 840 900 1020 1128 1236 1356 1464 1584 1692 1812 1920 2028 2148 2256 2376 2472 2592 2712 0,747 34 744 804 852 960 1068 1176 1284 1392 1488 1596 1704 1812 1920 2028 2136 2232 2352 2448 2568 0,794 32 696 756 804 900 1008 1104 1200 1308 1404

28、1500 1608 1704 1812 1908 2004 2112 2208 2304 2400 0,847 30 660 708 756 840 936 1032 1128 1224 1320 1416 1500 1596 1692 1788 1884 1968 2064 2160 2256 0,907 28 612 660 696 792 876 960 1056 1140 1224 1320 1404 1488 1584 1668 1752 1848 1920 2016 2112 0,977 26 564 612 648 732 816 900 972 1056 1140 1224 1

29、308 1392 1464 1548 1632 1704 1788 1872 1944 1,058 24 528 564 600 672 756 828 900 972 1056 1128 1200 1284 1356 1428 1500 1584 1656 1728 1800 1,154 22 480 516 552 624 684 756 828 900 960 1032 1104 1176 1236 1308 1380 1440 1512 1584 1656 1,210 21 456 492 528 588 660 720 792 852 924 984 1056 1116 1188 1

30、248 1320 1368 1440 1512 1584 1,270 20 432 468 504 564 624 684 756 816 876 936 1008 1068 1128 1188 1260 1320 1368 1440 1512 1,337 19 420 444 480 540 600 660 708 768 828 888 948 1008 1068 1128 1188 1248 1296 1368 1416 1,411 18 396 420 444 504 564 624 672 732 792 840 900 960 1020 1068 1128 1176 1248 12

31、96 1344 1,494 17 372 396 420 480 528 588 636 696 744 804 852 900 960 1008 1068 1104 1176 1224 1272 1,588 16 348 372 396 444 504 552 600 648 696 756 804 852 900 948 1008 1056 1104 1152 1200 1,693 15 324 348 372 420 468 516 564 612 660 708 756 804 840 888 936 984 1032 1080 1128 1,814 14 300 324 348 39

32、6 432 480 528 564 612 660 696 744 792 828 876 912 960 1008 1056 1,954 13 288 300 324 360 408 444 492 528 564 612 648 696 732 768 816 852 888 936 984 BSISO8122:20033IS:2218 O3002(E) 4 I SO 3002 All irhgts seredevr Table 1 (continued) Needle pitch Gauge Nominal diameter, mm (designation d c , in) t mm

33、 E 177,8 (7) 190,5 (7,5) 203,2 (8) 228,6 (9) 254 (10) 279,4 (11) 304,8 (12) 330,2 (13) 355,6 (14) 381 (15) 406,4 (16) 431,8 (17) 457,2 (18) 482,6 (19) 508 (20) 533,4 (21) 558,8 (22) 584,2 (23) 609,6 (24) 2,117 12 264 276 300 336 372 408 444 492 528 564 600 636 672 708 756 792 816 864 888 2,309 11 24

34、0 252 276 312 348 372 408 444 480 516 552 588 624 660 684 720 744 792 816 2,540 10 216 228 252 276 312 348 372 408 432 468 504 528 564 600 624 648 696 720 744 2,822 9 192 204 228 252 276 312 336 360 396 420 444 480 504 540 564 600 624 648 672 3,175 8 168 180 204 228 252 276 300 324 348 372 396 420 4

35、44 480 504 528 552 576 600 3,629 7 156 156 168 192 216 240 264 288 300 324 348 372 396 420 456 456 480 504 528 4,233 6 132 144 144 168 180 204 228 240 264 276 300 312 336 360 372 384 408 432 456 5,080 5 108 120 120 144 156 168 180 204 216 228 252 264 276 300 312 336 336 360 360 5,644 4,5 96 108 108

36、120 144 156 168 180 192 204 228 240 252 264 276 288 312 312 336 6,350 4 84 96 96 108 120 132 144 156 168 180 204 216 228 240 252 264 264 288 288 7,257 3,5 72 84 84 96 108 120 132 144 156 168 168 180 192 204 216 216 240 240 264 8,467 3 60 72 72 84 96 96 108 120 132 144 144 156 168 180 180 192 192 216

37、 216 10,160 2,5 48 60 60 72 72 84 96 96 108 120 120 132 144 144 156 168 168 168 192 12,700 2 36 48 48 60 60 72 72 84 84 96 96 108 108 120 120 120 144 144 144 BSISO8122:20034IS:2218 O3002(E) I SO 3002 All irhgts seredevr 5 Table 1 (continued) Needle pitch Gauge Nominal diameter, mm (designation d c ,

38、 in) t mm E 635 (25) 660,4 (26) 711,2 (28) 762 (30) 787,4 (31) 812,8 (32) 838,2 (33) 863,6 (34) 911,4 (36) 965,2 (38) 1016 (40) 1066,8 (42) 1117,6 (44) 1168,4 (46) 1219,2 (48) 1270 (50) 1320,8 (52) 1371,6 (54) 1422,4 (56) 1473,2 (58) 1524 (60) 0,508 50 3912 4080 4392 4704 4872 5016 5184 5328 5640 59

39、52 6288 6600 6912 7224 7536 7848 8160 8472 8784 9096 9408 0,529 48 3768 3912 4224 4512 4680 4824 4968 5112 5424 5736 6024 6336 6624 6936 7224 7536 7824 8136 8448 8736 9048 0,552 46 3600 3744 4032 4320 4464 4608 4752 4896 5208 5496 5784 6072 6360 6648 6936 7224 7512 7800 8088 8376 8664 0,577 44 3456

40、3576 3864 4152 4272 4416 4560 4704 4968 5256 5520 5808 6072 6360 6624 6912 7176 7464 7728 8016 8280 0,605 42 3288 3432 3696 3960 4080 4224 4344 4488 4752 5016 5280 5544 5808 6072 6336 6600 6864 7128 7392 7656 7920 0,635 40 3144 3264 3504 3768 3888 4008 4152 4272 4512 4776 5016 5280 5520 5784 6024 62

41、88 6528 6768 7032 7272 7536 0,668 38 2976 3096 3336 3576 3696 3816 3936 4056 4296 4536 4776 5016 5256 5496 5736 5952 6192 6432 6672 6912 7152 0,706 36 2832 2928 3168 3384 3504 3624 3720 3840 4056 4296 4512 4752 4968 5208 5424 5640 5880 6096 6336 6552 6768 0,747 34 2664 2760 2976 3192 3312 3408 3528

42、3624 3840 4056 4272 4488 4704 4896 5112 5328 5544 5760 5976 6192 6408 0,794 32 2496 2616 2808 3000 3120 3216 3312 3408 3624 3816 4008 4224 4416 4608 4824 5016 5232 5424 5616 5832 6024 0,847 30 2352 2448 2640 2832 2928 3000 3096 3192 3384 3576 3768 3960 4152 4320 4512 4704 4896 5088 5280 5472 5640 0,

43、907 28 2184 2280 2448 2640 2712 2808 2904 2976 3168 3336 3504 3696 3864 4032 4224 4392 4560 4752 4920 5088 5280 0,977 26 2040 2112 2280 2448 2520 2616 2688 2760 2928 3096 3264 3432 3576 3744 3912 4080 4248 4416 4560 4728 4896 1,058 24 1872 1944 2112 2256 2328 2400 2472 2568 2712 2856 3000 3168 3312

44、3456 3624 3768 3912 4056 4224 4368 4512 1,154 22 1728 1800 1920 2064 2136 2208 2280 2352 2472 2616 2760 2904 3024 3168 3312 3456 3576 3720 3864 4008 4152 1,210 21 1632 1704 1848 1968 2040 2112 2160 2232 2376 2496 2640 2760 2904 3024 3168 3288 3432 3552 3696 3816 3960 1,270 20 1560 1632 1752 1872 194

45、4 2016 2064 2136 2256 2376 2496 2640 2760 2880 3000 3144 3264 3384 3504 3648 3768 1,337 19 1488 1536 1656 1776 1848 1896 1968 2016 2136 2256 2376 2496 2616 2736 2856 2976 3096 3216 3336 3456 3576 1,411 18 1416 1464 1584 1680 1752 1800 1872 1920 2040 2136 2256 2376 2472 2592 2712 2832 2928 3048 3168

46、3264 3384 1,494 17 1320 1392 1488 1608 1656 1704 1752 1800 1920 2016 2136 2232 2352 2448 2568 2664 2760 2880 2976 3096 3192 1,588 16 1248 1296 1392 1512 1560 1608 1656 1704 1800 1896 2016 2112 2208 2304 2400 2496 2616 2712 2808 2904 3000 1,693 15 1176 1224 1320 1416 1464 1512 1560 1608 1680 1776 187

47、2 1968 2064 2160 2256 2352 2448 2544 2640 2736 2832 1,814 14 1104 1128 1224 1320 1368 1392 1440 1488 1584 1656 1752 1848 1920 2016 2112 2184 2280 2376 2448 2544 2640 1,954 13 1008 1056 1128 1224 1272 1296 1344 1392 1464 1536 1632 1704 1800 1872 1944 2040 2112 2208 2280 2352 2448 BSISO8122:20035IS:22

48、18 O3002(E) 6 I SO 3002 All irhgts seredevr Table 1 (continued) Needle pitch Gauge Nominal diameter, mm (designation d c , in) t mm E 635 (25) 660,4 (26) 711,2 (28) 762 (30) 787,4 (31) 812,8 (32) 838,2 (33) 863,6 (34) 911,4 (36) 965,2 (38) 1016 (40) 1066,8 (42) 1117,6 (44) 1168,4 (46) 1219,2 (48) 12

49、70 (50) 1320,8 (52) 1371,6 (54) 1422,4 (56) 1473,2 (58) 1524 (60) 2,117 12 936 984 1056 1128 1152 1200 1248 1272 1344 1416 1512 1584 1656 1728 1800 1872 1944 2040 2112 2184 2256 2,309 11 864 888 960 1032 1096 1104 1128 1176 1248 1296 1368 1440 1512 1584 1656 1728 1800 1872 1920 1992 2064 2,540 10 768 816 864 936 960 1008 1032 1056 1128 1200 1248 1320 1368 1440 1512 1560 1632 1680 1752 1824 1872 2,822 9 696 720 792 840 864 888 936 960