BS ISO 8117-2003 Textile machinery - Knitting machines - Nominal diameters of circular machines《纺织机械 针织机 环型织机的公称直径》.pdf

《BS ISO 8117-2003 Textile machinery - Knitting machines - Nominal diameters of circular machines《纺织机械 针织机 环型织机的公称直径》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 8117-2003 Textile machinery - Knitting machines - Nominal diameters of circular machines《纺织机械 针织机 环型织机的公称直径》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 8117:2003 Textile machinery Knitting machines Nominal diameters of circular machines ICS 59.120.40 BS ISO 8117:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 12 March 2003 BSI 12 March 2003 ISBN 0 580 41391 8 Nat

2、ional foreword This British Standard reproduces verbatim ISO 8117:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: A list of organizations represented on this c

3、ommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” f

4、acility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligat

5、ions. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of

6、pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 and 2, an inside back cover and a back cover The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publicat

7、ion Amd. No. Date Comments Reference number ISO 8117:2003(E)INTERNATIONAL STANDARD ISO 8117 Second edition 2003-02-15 Textile machinery Knitting machines Nominal diameters of circular machines Matriel pour lindustrie textile Machines tricoter Diamtres nominaux des machines circulaires BSISO8117:2003

8、DPlcsid Fremia ihTs PDF file mya ctnoian emdebt dedyfepcaes. In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalt no deeh comuptfrep reromign tide ehtin.g In wodlnidaot gnihs fil,e

9、raptise atpecc tiereht nser ehnopsiiblity fo nto ifnriigngn Aebods licnesilop gnic.y ehT ISneC Otlar Secrteirata accepts no ailbytili ni htsi area. Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF file cna f ebi dnuon tlareneG eh Ifnler oat

10、it evt oeh file; tP ehD-Fcrtaeino marapteres wtpo ereimizf deirp rotni.gn Evc yresah era t neebakt nesne ot erutah tf ehili es siutlbaf eosu rI yb eSO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertaign ti ot is f,dnuo lpsaee ifnrom ttneC ehlar Secterirata ta teh serddaig sleb nevwo. ii BSI

11、SO8117:2003 iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subjec

12、t for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC)

13、 on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committee

14、s are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be he

15、ld responsible for identifying any or all such patent rights. ISO 8117 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial laundering, Subcommittee SC 3, Machinery for fabric manufacturing including preparatory machinery and accessories. Th

16、is second edition cancels and replaces the first edition (ISO 8117:1986), which has been technically revised. BSISO8117:2003INTENRATIONAL TSANDADR IS:7118 O3002(E)1Textile machinery Knitting machines Nominal diameters of circular machines 1 Scope This International Standard specifies the nominal dia

17、meters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines. 2 Normative references The following referenced documents are indispensable for the applicat

18、ion of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7839, Textile machinery and accessories Knitting machines Classification and vocabulary ISO 8188, Textile machiner

19、y and accessories Pitches of knitting machine needles 3 Nominal diameters and numerical designation For classifications and the vocabulary of knitting machines, see ISO 7839; for needle pitches, see ISO 8188. Table 1 specifies the nominal diameter, in millimetres, and the numerical designation appli

20、cable to each machine size. BSISO8117:20032 Table 1 Circular knitting machines Small circular knitting machines Large circular knitting machines Nominal diameter Designation Nominal diameter Designation 57 2 1/4 178 7 64 2 1/2 190 7 1/2 70 2 3/4 203 8 76 3 229 9 83 3 1/4 254 10 89 3 1/2 279 11 95 3

21、3/4 305 12 102 4 330 13 108 4 1/4 356 14 114 4 1/2 381 15 121 4 3/4 406 16 127 5 432 17 133 5 1/4 457 18 140 5 1/2 483 19 146 5 3/4 508 20 152 6 533 21 165 6 1/2 559 22 584 23 610 24 635 25 660 26 711 28 762 30 (787) (31) 813 32 (838) (33) 864 34 914 36 965 38 1 016 40 1 067 42 1 118 44 1 168 46 1 2

22、19 48 1 270 50 1 321 52 1 372 54 1 422 56 1 473 58 1 524 60 Values shown in brackets should be avoided as far as possible. BSISO8117:2003BS ISO 8117:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British

23、Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the

24、constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover

25、. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be a

26、ddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publ

27、ished as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available

28、which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. F

29、or details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is a

30、vailable on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be repro

31、duced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size,

32、type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.