GOST ISO 5423-2013 Moulded plastics footwear Lined or unlined polyurethane boots for general use Specification《模压塑料鞋靴 一般用途内衬或者非内衬聚氯乙烯靴子 规格》.pdf

《GOST ISO 5423-2013 Moulded plastics footwear Lined or unlined polyurethane boots for general use Specification《模压塑料鞋靴 一般用途内衬或者非内衬聚氯乙烯靴子 规格》.pdf》由会员分享，可在线阅读，更多相关《GOST ISO 5423-2013 Moulded plastics footwear Lined or unlined polyurethane boots for general use Specification《模压塑料鞋靴 一般用途内衬或者非内衬聚氯乙烯靴子 规格》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 , () INTERSTATE COUNCIL FOR STANDARDIZATION, METROLOGY AND CERTIFICATION (ISC) ISO 5423 2013 (ISO 5423:1992, IDT) 2014 ISO 54232013 II , 1.092 . 1.22009 . , . , , , 1 ( ), 160 , 4 2 3 , ( 58- 28 2013 .) : ( 3166) 00497 ( 3166) 00497 AZ AM BY KG MD RU TJ UZ 4 ISO 5423:1992 Moulded plastics footwear

2、Lined or unlined polyurethane boots for general use Specification ( . . ). ISO/TC 45 (ISO). (en). 1.52001 ( . 3.6). , , , , . . (IDT) 5 28 2013 . 762- ISO 54232013 1 2015 . 6 ISO 54232013 III , . ) . , . , 2014 , ISO 54232013 1 Moulded plastics footwear. Lined or unlined polyurethane boots for gener

3、al use. Specification 2015 01 01 1 . , , . 2 . . ISO 37:1977 Rubber vulcanized Determination of tensile stress-strain properties ( . ) ISO 48:1979 Vulcanized rubbers Determination of hardness (Hardness between 30 and 85 IRHD) . ( 30 85 IRHD) ISO 458-1:1985 Plastics Determination of stiffness in tors

4、ion of flexible materials Part 1: General method ( . . 1. ) ISO/R 463:1965 Dial gauges readings in 0,01 mm, 0,001 in and 0,0001 in ( 0,01 , 0,001 0,0001 ) ISO 471:1983 Rubber Standard temperatures, humidities and times for the condi-tioning and testing of test pieces ( . , ) ISO 10335:1990 Rubber an

5、d plastics footwear Nomenclature ( . ) , 1 , . ( ), ( ) . , , , , . 3 ISO 10335. 4 1 F. ISO 54232013 2 4.1 . 1,5 . 2 . 4.2 1. 1 , 1,5, 1,0 : a) b) 4,0 3,0 a) b) 13,0 9,0 11,0 7,0 7,0 3,0 5,0 2,5 a) b) 25, 9,0 20,0 4,0 19,0 3,0 14,0 2,5 4.3 , . . 5 - 5.1 , , . , ISO 37. 5.2 B 150000 , . 5.3 100 %- ISO 37 (23 2) 1, . . 1, 2, . (2,0 0,2) .