FORD ESF-M6B8-A-2002 INK MARKING FLUID TYPE TO BE USED WITH FORD WSS-M99P1111-A 《流体型标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESF-M6B8-A-2002 INK MARKING FLUID TYPE TO BE USED WITH FORD WSS-M99P1111-A 《流体型标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M6B8-A-2002 INK MARKING FLUID TYPE TO BE USED WITH FORD WSS-M99P1111-A 《流体型标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2002 08 26 Revised Updated and renumbered 1978 06 12 Metricated and Retyped CF4H-RD 567168-21 1964 06 30 Released F6-1393 Printed copies are uncontrolled Page 1 of 2 Copyright 2002, Ford Global Technologies,

2、 Inc. INK, MARKING, FLUID TYPE ESF-M6B8-A 1. SCOPE The material defined by this specification is a fluid type, quick drying marking ink with good adhesive properties for use in automatic printers. 2. APPLICATION This specification was released originally for material used for marking identification

3、on alternators, heater motors, windshield wiper motors, etc. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 SOLIDS, min (FLTM BI 102-01) Percent

4、 solids by weight varies with color as follows: Tangerine 29% Maroon 12% Blue 12% Silver 25% Black 23% Red 13% Violet 13% Orange 35% Brown 12% White 38% Green 12% Yellow 35% 3.3 VEHICLE Percent vehicle by weight not less than 7-1/2%. 3.4 COLOR To be specified on Engineering Drawing. ENGINEERING MATE

5、RIAL SPECIFICATION ESF-M6B8-A Page 2 of 2 Copyright 2002, Ford Global Technologies, Inc. 3.5 STABILITY There shall be no setting, livering or curdling of the material after being stored for 30 days in a 3/4 filled, sealed container at 23 +/- 2 C. (Some materials will tend to settle in storage, but m

6、ust be readily re-dispersed). 3.6 TOXICITY The material shall not contain any benzol, benzene, aniline oil or hydrolizable chlorinated hydrocarbons, nor will it have an obnoxious or objectionable odor. 3.7 QUALITY The material shall be free from dirt, lumps and skins, shall adhere readily to painted

7、 and unpainted surfaces and be miscible with the recommended thinner (denatured ethyl alcohol, M-1044-C). 3.8 RESISTANCE PROPERTIES ! Must be resistant to grease, water, oil, gasoline and alcohol when thoroughly dry. ! Tangerine, Silver, White, Yellow, Black and Red must withstand 175 C for 5 hours minimum with only slight darkening. ! Blue, Brown, Green, Maroon, Violet and Orange fade at 175 C after 2 hours, but must retain legibility of color.