FORD ESB-M98D9-A-2010 LAMINATE POLYVINYL CHLORIDE METAL - INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部层压聚氯乙烯 金属 与福特WSS-M99P1111-A 一起使用》.pdf
《FORD ESB-M98D9-A-2010 LAMINATE POLYVINYL CHLORIDE METAL - INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部层压聚氯乙烯 金属 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享,可在线阅读,更多相关《FORD ESB-M98D9-A-2010 LAMINATE POLYVINYL CHLORIDE METAL - INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部层压聚氯乙烯 金属 与福特WSS-M99P1111-A 一起使用》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 10 11 N-STATUS No replacement named C. Mracna, NA 2006 08 16 Revised ESB-M98D9-B inactivated and removed; Inserted 3.0; Deleted 3.1, 3.19, 3.19.1, 3.19.2, 3.19.3, 3.21 Revised 3.18 R. Lord 1984 02 07 Released C901-DR522950-1 T. J. Wallag
2、Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 3 LAMINATE, POLYVINYL CHLORIDE/METAL - INTERIOR ESB-M98D9-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a vinyl metal laminate, consisting of a polyvinyl chloride film adh
3、ered to a metal backing, suitable for the manufacturing of die stamped parts. 2. APPLICATION This specification was released originally for material used as an inner pillar panel cover, package tray or for other interior trim applications. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MAT
4、ERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 APPEARANCE (FLTM BI 109-01) The color, pattern, and finish shall match the approved Design Center master sample, or shall be as specified on the engineering
5、drawing. 3.3 METAL BACKING The backing may be a CRLC steel chemically cleaned prior to lamination and treated to prevent corrosion. Other metals such as aluminum, may be used provided the type and quality is specified on the engineering drawings. 3.4 VINYL FILM The film shall have the necessary flex
6、ibility and elongation characteristics to allow it to be easily formed in drawing operations without excessive loss of embossing, delamination, color change, crazing, or cracking. 3.5 THICKNESS AND DIMENSIONS The thickness of the vinyl film, metal backing and total thickness of the laminate shall be
7、 specified on the engineering drawings along with other part dimensions. 3.6 DRAWABILITY The laminate shall bend 180 around a 12.7 mm mandrel without damage to the vinyl film or the adhesive bond. ENGINEERING MATERIAL SPECIFICATIONESB-M98D9-A Printed copies are uncontrolled Copyright 2010, Ford Glob
8、al Technologies, LLC Page 2 of 3 3.7 FILM ADHESION (ASTM D 413, Machine Method, 25 mm wide specimens) The adhesion between the vinyl film and metal backing shall be 67 N minimum on flat surfaces and 44 N minimum in areas where the metal has been stretched 15% or more. 3.8 RESISTANCE TO ELEVATED TEMP
9、ERATURE There shall be no evidence of shrinkage, loss of grain, color change, or delamination of the film after a flat sheet or formed part has been exposed to a temperature of 88 +/- 8 C h for 8 h. 3.9 RESISTANCE TO HUMIDITY The vinyl film and adhesive bond shall show no evidence of deterioration,
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- FORDESBM98D9A2010LAMINATEPOLYVINYLCHLORIDEMETALINTERIORTOBEUSEDWITHFORDWSSM99P1111A 内部 层压 聚氯乙烯 金属 福特

链接地址:http://www.mydoc123.com/p-745725.html