ETSI TS 186 007-2-2017 Core Network and Interoperability Testing (INT) Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem Conformance test specification_1.pdf

《ETSI TS 186 007-2-2017 Core Network and Interoperability Testing (INT) Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem Conformance test specification_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 186 007-2-2017 Core Network and Interoperability Testing (INT) Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem Conformance test specification_1.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 186 007-2 V5.1.1 (2017-12) Core Network and Interoperability Testing (INT); Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification; (3GPP Release 12); Part 2: Test Suite Structure and Test Purposes (TSS Essential, or potentially Essent

2、ial, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee ca

3、n be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered

4、 by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, s

5、ervices or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 2 of a multi-part deliverable covering the Conformance Test Specification

6、of Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Communication HOLD (HOL

7、D) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.610 Release 12)“. 2 ETSI TS 186 007-1: “Core Network and Interoperability Testing (INT); Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification; (3GPPTM

8、Release 12); Part 1: Protocol Implementation Conformance Statement (PICS)“. 3 ETSI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 4 ISO/IEC 9646-1: “Information technology - Open systems interco

9、nnection - Conformance testing methodology and framework - Part 1: General concepts“. 5 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 6 IETF RFC 3264: “An Offer/Answer Model wit

10、h the Session Description Protocol (SDP)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version o

11、f the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but

12、 they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 186 007-2 V5.1.1 (2017-12)6 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 610 1 and the following apply: Ab

13、stract Test Suite (ATS): Refer to ISO/IEC 9646-1 4. Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 4. PICS pro forma: Refer to ISO/IEC 9646-1 4. point of control and observation: Refer to ISO/IEC 9646-1 4. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 4. Sys

14、tem Under Test (SUT): Refer to ISO/IEC 9646-1 4. Test Purpose (TP): Refer to ISO/IEC 9646-1 4. NOTE: This may contain additional information. 3.2 Symbols For the purposes of the present document, the symbols given in ETSI TS 124 610 1 apply. 3.3 Abbreviations For the purposes of the present document

15、, the abbreviations given in ETSI TS 124 610 1 and the following apply: AS Application Server CN Core NetworkETSI European Telecommunication Standardization Institute HOLD Communication HOLD IM IP MultimediaINT Core Network and Interoperability Testing IP Internet Protocol IUT Implementation Under T

16、est NNI Network Network Interface PICS Protocol Implementation Conformance Statement RTCP RTP Control Protocol SDP Session Description Protocol SIP Session Initiation Protocol SUT System Under Test TP Test Purpose TS Technical Specification TSS Test Suite Structure ETSI ETSI TS 186 007-2 V5.1.1 (201

17、7-12)7 4 Test Suite Structure (TSS) and Test configuration 4.0 Table of Test suite Structure Table 4-1: Test suite structure ServedUser WithUPDATE CH_U01_xxx ithoutUPDATE CH_U02_xxxNetwork CH_N01_xxx4.1 Configuration The scope of the present document is to test the signalling and procedural aspects

18、of the stage 3 requirements as described in ETSI TS 124 610 1. The stage 3 description respects the requirements to several network entities and also to requirements regarding to end devices. Therefore several interfaces (reference points) are addressed to satisfy the test of the different entities.

19、 Therefore to test the appropriate entities the configurations below are applicable: Testing of the Network: This entity is responsible to perform the service. In case only the Gm interface is accessible this shall be used instead. In this case, be aware that the verification of several requirements

20、 is impeded. Figure 4-1: Applicable interfaces to test using the (generic) NNI interface Testing of User Equipment: There are several requirements regarding to the end devices. Therefore a special configuration appears Figure 4-2: Applicable configuration to test the User Equipment User EquipmentImp

21、lementation under TestTest SystemGmETSI ETSI TS 186 007-2 V5.1.1 (2017-12)8 5 Test Purposes (TP) 5.1 Introduction 5.1.1 TP naming convention Table 5-1: TP identifier naming convention scheme Identifier: _ = supplementary service: e.g. “CH“ = type of IUT: U User N Network= group 2 digit field represe

22、nting group reference according to TSS = sequential number (001-999) 5.1.2 Test strategy As the base standard ETSI TS 124 610 1 contains no explicit requirements for testing, the TPs were generated as a result of an analysis of the base standard and the PICS specification ETSI TS 186 007-1 2. 5.2 Us

23、er TPs for HOLD 5.2.0 Introduction All PICS items referred to in this clause are as specified in ETSI TS 186 007-1 2 unless indicated otherwise by another numbered reference. 5.2.1 Served user 5.2.1.1 Communication Hold with support for UPDATE TSS ServedUser/WithUPDATE TP CH_U01_001 HOLD reference 4

24、.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendrecv. Ensure that the IUT to hold an individual media stream of the communication session, sends an UPDATE requ

25、est containing an SDP body with an attribute line indicating a= sendonly. Precondition: A session was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equipment SUT

26、Test Equipment Establish a confirmed session User invokes the HOLD service barb4right UPDATE(sendonly) barb4left 200 OK (recvonly) Apply post test routine ETSI ETSI TS 186 007-2 V5.1.1 (2017-12)9 TSS ServedUser/WithUPDATE TP CH_U01_002 HOLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PIC

27、S 4.6.1/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendrecv. Ensure that the IUT responds to the hold request of an individual media stream of the communication session from the remote party, sends a 200 OK INVITE/

28、UPDATE response containing an SDP body with an attribute line indicating a=recvonly. Precondition: A session was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equ

29、ipment SUT Test Equipment Establish a confirmed session CASE A barb4left UPDATE(sendonly) barb4right 200 OK (recvonly) CASE B barb4left INVITE(sendonly) barb4right 200 OK (recvonly) barb4left ACK Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_003 HOLD reference 4.5.2.1 Selection express

30、ion PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to recvonly. Ensure that the IUT to hold an individual media stream of the communication session, sends an UPDATE request containing an SDP bo

31、dy with an attribute line indicating a=inactive. Precondition: A session was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to recvonly One individual media stream Comments: User Equipment SUT Test Equipment Establish

32、a confirmed session CASE A barb4left UPDATE(sendonly) barb4right 200 OK (recvonly) CASE B barb4left INVITE(sendonly) barb4right 200 OK (recvonly) barb4left ACK User invokes the HOLD service barb4right UPDATE(inactive) barb4left 200 OK (inactive) Apply post test routine TSS ServedUser/WithUPDATE TP C

33、H_U01_004 HOLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose: Session resume. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendonly. Ensure that the IUT to resume an individual media stream of the communication

34、 session, sends an UPDATE request containing an SDP body with an attribute line indicating a=sendrecv or without attribute line. ETSI ETSI TS 186 007-2 V5.1.1 (2017-12)10 Precondition: A session was established between the served user and a remote user according to the basic Call procedures The medi

35、a stream was previously set to sendonly One individual media stream Comments: User Equipment SUT Test Equipment Establish a confirmed session User invokes the HOLD service barb4right UPDATE(sendonly) barb4left 200 OK (recvonly) User resumes the session barb4right UPDATE(sendrecv or absent) barb4left

36、 200 OK (sendrecv or absent) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_005 HOLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose: Session resume. UPDATE method is used. Individual media streams are affected. The media stream was previously set to in

37、active. Ensure that the IUT to resume an individual media stream of the communication session, sends an UPDATE request containing an SDP body with an attribute line indicating a=recvonly. Precondition: A session was established between the served user and a remote user according to the basic Call pr

38、ocedures The media stream was previously set to inactive One individual media stream Comments: User Equipment SUT Test Equipment Establish a confirmed session CASE A barb4left UPDATE(sendonly) barb4right 200 OK (recvonly) CASE B barb4left INVITE(sendonly) barb4right 200 OK (recvonly) barb4left ACK U

39、ser invokes the HOLD service barb4right UPDATE(inactive) barb4left 200 OK (inactive) User resumes the media session barb4right UPDATE(recvonly) barb4left 200 OK (sendonly) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_006 HOLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PIC

40、S 4.6.1/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to inactive. Ensure that the IUT to resume an individual media stream of the communication session, sends an UPDATE request containing an SDP body with an attribute l

41、ine indicating a=sendonly. Precondition: A session was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to inactive One individual media stream ETSI ETSI TS 186 007-2 V5.1.1 (2017-12)11 Comments: User Equipment SUT Test

42、Equipment Establish a confirmed session User invokes the HOLD service barb4right UPDATE(sendonly) barb4left 200 OK (recvonly) CASE A barb4left UPDATE(inactive) barb4right 200 OK (inactive) CASE B barb4left INVITE(inactive) barb4right 200 OK (inactive) barb4left ACK User resumes the media session bar

43、b4right UPDATE(sendonly) barb4left 200 OK (recvonly) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_007 HOLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/1 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was

44、previously set to sendrecv. Ensure that the IUT to hold an individual media stream of an early dialogue, sends an UPDATE request containing an SDP body with an attribute line indicating a= sendonly. Precondition: An early dialogue was established between the served user and a remote user according t

45、o the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equipment SUT Test Equipment Establish an early dialogue User invokes the HOLD service barb4right UPDATE(sendonly) barb4left 200 OK (recvonly) Apply post test routine TSS ServedUser

46、/WithUPDATE TP CH_U01_008 HOLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/1 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendrecv. Ensure that the IUT responds to the hold request of an individu

47、al media stream from the remote party of an early dialogue, sends a 200 OK UPDATE response containing an SDP body with an attribute line indicating a=recvonly. Precondition: An early dialogue was established between the served user and a remote user according to the basic Call procedures The media s

48、tream was previously set to sendrecv One individual media stream Comments: User Equipment SUT Test Equipment Establish an early dialogue barb4left UPDATE(sendonly) barb4right 200 OK (recvonly) Apply post test routine ETSI ETSI TS 186 007-2 V5.1.1 (2017-12)12 TSS ServedUser/WithUPDATE TP CH_U01_009 H

49、OLD reference 4.5.2.1 Selection expression PICS 4.5.1/1 AND PICS 4.6.1/2 Test purpose: Session hold. UPDATE method is used. All media streams are affected. The media streams were previously set to sendrecv. Ensure that the IUT to hold all media streams of the communication session, sends an UPDATE request containing an SDP body with a session level direction attribute line indicating a=sendonly. Precondition: A session was established between the se