ETSI TS 183 025-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) H 248 Non-Call Related Procedures and Management System Inter_1.pdf

《ETSI TS 183 025-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) H 248 Non-Call Related Procedures and Management System Inter_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 183 025-2009 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) H 248 Non-Call Related Procedures and Management System Inter_1.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 183 025 V2.5.1 (2009-04)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);H.248 Non-Call Related Procedures andManagement System InteractionETSI ETSI TS 183 025 V2.5.1 (2009-04)2Reference RTS/TISPAN-03193-NGN-R2 Keywords

2、 H.248, MGC ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present do

3、cument can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dis

4、pute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other

5、ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by wr

6、itten permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of

7、 its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks register

8、ed and owned by the GSM Association. ETSI ETSI TS 183 025 V2.5.1 (2009-04)3Contents Intellectual Property Rights 6g3Foreword . 6g31 Scope 7g31.1 Applicability . 7g31.2 Relation to H.248 Standards . 7g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions and abbre

9、viations . 9g33.1 Definitions 9g33.2 Abbreviations . 10g34 Reference Architecture . 10g35 H.248 Concepts And Logical Entities 11g35.1 H.248 Entities . 11g35.2 H.248 Non-Call Related Commands 11g35.3 H.248 Service State 12g36 Management Primitives 12g37 Failure/Recovery Scenarios 12g38 Redundancy Sce

10、narios . 13g39 General Use Cases 13g310 Interaction Between Use Cases and Non-Call Related H.248 Procedures . 14g310.1 Enable MG . 14g310.1.1 Enable MG (at MGC) . 14g310.1.2 Enable MG (at MG) 14g310.2 Enable MGC . 16g310.3 Disable MG (Graceful) . 17g310.3.1 Disable MG (Graceful) (at MGC) . 17g310.3.

11、2 Disable MG (Graceful) (at MG) . 18g310.4 Disable MG (Immediate) 18g310.4.1 Disable MG (Immediate) (at MGC) . 18g310.4.2 Disable MG (Immediate) (at MG) 19g310.5 Disable MGC 19g310.6 Enable Termination 19g310.6.1 Enable Termination (at MGC) 19g310.6.2 Enable Termination (at MG) . 20g310.7 Disable Te

12、rmination (Graceful) . 20g310.7.1 Disable Termination (Graceful) (at MGC) . 20g310.7.2 Disable Termination (Graceful) (at MG) 21g310.8 Disable Termination (Immediate) 21g310.8.1 Disable Termination (Immediate) (at MGC) 21g310.8.2 Disable Termination (Immediate) (at MG) . 22g310.9 MG Failure and Reco

13、very 22g310.10 MG Termination Failure and Recovery 23g310.11 MGC Failure and Recovery 23g310.12 User Plane Failure 23g310.12.1 Failure affecting a Single Termination . 23g310.12.2 Failure affecting Multiple Terminations . 24g310.13 MGC-MG Control Association Failure and Recovery . 24g310.14 MG Overl

14、oad 26g310.15 MGC Overload . 27g3ETSI ETSI TS 183 025 V2.5.1 (2009-04)410.16 MGC Hand-Off 27g310.17 MGC Triggered MG Redirect 28g310.18 MG Failover . 28g310.19 Change of MG Resources . 29g311 Non-Call Related H.248 Procedures and their Contents 30g311.1 MG Registration (Cold Boot) . 31g311.2 MG Rest

15、oration 32g311.3 Packages Audit . 32g311.4 Context Audit . 33g311.5 MG Termination Available 35g311.6 MG Termination Unavailable. 36g311.7 Audit Termination State . 37g311.8 Set ROOT Termination Events/Properties . 37g311.9 MGC Initiated Service Restoration 38g311.10 Check MG Availability 38g311.11

16、MG Service Cancellation (Graceful) 39g311.12 MG Service Cancellation (Immediate) . 39g311.13 MGC Hand-Off 40g311.14 MG Re-Registration (Handoff) 41g311.15 MG Termination OOS Graceful . 42g311.16 MGC Overload Notification . 42g311.17 MG Registration Redirect 43g311.18 User Plane Failure 44g311.19 Roo

17、t Event Notification 44g311.20 MG Lost Communication (Disconnected) . 45g311.21 MG Lost Communication (Failover) 46g311.22 MG Redundant Takeover (Primary) . 47g311.23 MG Re-Registration (Restart) 48g311.24 Wildcarded Subtract . 49g311.25 MG Redundant Takeover (Secondary) . 49g311.26 MGC Initiated Se

18、rvice Cancellation. 50g311.27 Void 50g311.28 Audit ROOT Properties 50g3Annex A (informative): Stage 3 Non-Call Related H.248 Procedures and their Contents 51g3A.1 MG Registration (Cold Boot) . 51g3A.2 MG Restoration 51g3A.3 Packages Audit . 52g3A.4 Context Audit . 53g3A.5 MG Termination Available 54

19、g3A.6 MG Termination Unavailable 55g3A.7 Audit Termination State . 55g3A.8 Set ROOT Termination Events/Properties . 56g3A.9 MGC Initiated Service Restoration 56g3A.10 Check MG Availability 57g3A.11 MG Service Cancellation (Graceful) 57g3A.12 MG Service Cancellation (Immediate) . 58g3A.13 MGC Hand-Of

20、f 58g3A.14 MG Re-Registration (Handoff) 59g3A.15 MG termination OOS (Graceful) . 60g3A.16 MGC Overload Notification . 60g3ETSI ETSI TS 183 025 V2.5.1 (2009-04)5A.17 MG Registration Redirect 61g3A.18 User Plane Failure 61g3A.19 Root Event Notification 62g3A.20 MG Lost Communication (Disconnected) . 6

21、2g3A.21 MG Lost Communication (Failover) 63g3A.22 MG Redundant Takeover (Primary) . 64g3A.23 MG Re-Registration (Restart) 64g3A.24 Wildcarded Subtract . 65g3A.25 MG Redundant Takeover (Secondary) . 65g3A.26 MGC Initiated Service Cancellation 66g3A.27 Void 66g3A.28 Audit ROOT Properties 66g3Annex B (

22、informative): Relation of the H.248 ServiceStates Property Model with Management Models 68g3B.1 Introduction 68g3B.2 Scope 68g3B.3 Mapping between Models 68g3B.3.1 Example Management Models . 68g3B.4 Interaction Aspects . 69g3B.4.1 Effect of H.248 Actions on Management Models 69g3B.4.2 Effect of Man

23、agement Model State Transition on H.248 Model . 69g3B.4.2.1 Configuration management . 69g3B.4.2.2 Fault management . 70g3B.4.3 Effect of failures in H.248 entities on State Transition in Management Model and H.248 Model 70g3Annex C (informative): Change history . 71g3History 72g3ETSI ETSI TS 183 02

24、5 V2.5.1 (2009-04)6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “In

25、tellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no inv

26、estigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Spec

27、ification (TS) has been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). This technical specification was previously published as a Technical Report. ETSI ETSI TS 183 025 V2.5.1 (2009-04)71 Scope The purpose of th

28、e present document is to define guidelines with regard to the interaction of non-call related H.248 procedures and generic network management use cases and vice versa. More specifically, the interaction between the following is considered: Control procedures at the H.248 interface. These are the pro

29、cedures between Media Gateway Controllers (primary and secondary) and their associated Media Gateways (primary, and secondary if available). These procedures primarily utilize the H.248 ServiceChange and H.248 Audit procedures. Management procedures at the management interface(s) of H.248 systems (i

30、.e. both Media Gateway Controller and Media Gateway) to perform non call related tasks such as configuration management (start-up, capability change, maintenance locking) and fault management (failure handling). It is intended that these guidelines are then subsequently used in corresponding H.248 p

31、rofiles to produce detailed non-call related procedures. At the current time, the existing set of ETSI H.248 profiles ( i.1, i.2, i.3 and i.4) lack any such detailed procedures. Specific management systems, architectures and protocols are outside the scope of the present document; only the general r

32、equirements and Use Cases related to the management system shall be discussed. 1.1 Applicability The present document is applicable to any network element that exhibits a H.248 interface and a management interface (e.g. SNMP). The intent of the present document is to provide guidelines so as to faci

33、litate a consistent set of behaviour for non-call related procedures in the related H.248 profile specifications. Due to the general nature of the present document, it is possible that some of the procedures herein will not be applicable to certain H.248 profiles - it is for a specific profile itsel

34、f to define which procedures are mandatory/optional/not applicable. The present document assumes an IP-based transport for H.248 signalling. The IP transport may be provided by either UDP or SCTP. 1.2 Relation to H.248 Standards The present document is considered to be complementary to H.248 standar

35、ds where there are discrepancies between the present document and the correspondent ITU-T Recommendation H.248 series Recommendations, the procedures of these ITU-T Recommendations (in particular ITU-T Recommendation H.248.1 i.5 and its annex F on ServiceChange), take precedence over those described

36、 in the present document. ETSI ETSI TS 183 025 V2.5.1 (2009-04)82 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made onl

37、y to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publi

38、cly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispens

39、able for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. Not applicable. 2.2 Informative references The following referenced documents are not

40、 essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 ETSI ES 283 002 (V1.1.1): “Telecommunications and Internet converged Ser

41、vices and Protocols for Advanced Networking (TISPAN); PSTN/ISDN Emulation Subsystem (PES); NGN Release 1 H.248 Profile for controlling Access and Residential Gateways“. i.2 ETSI ES 283 024 (V1.1.1): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); P

42、STN/ISDN Emulation: H.248 Profile for controlling Trunking Media Gateways in the PSTN/ISDN Emulation Subsystem (PES); Protocol specification“. i.3 ETSI ES 283 018 (V1.1.1): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Resource and Admission Cont

43、rol: H.248 Profile for controlling Border Gateway Functions (BGF) in the Resource and Admission Control Subsystem (RACS); Protocol specification“. i.4 ETSI ES 283 031 (V1.1.1): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IP Multimedia: H.248 Pr

44、ofile for controlling Multimedia Resource Function Processors (MRFP) in the IP Multimedia System (IMS); Protocol specification“. i.5 ITU-T Recommendation H.248.1 (2005): “Gateway Control Protocol: Version 3“. i.6 ITU-T Recommendation H.248.10 (2001): “Gateway control protocol: Media Gateway Resource

45、 Congestion Handling package“. i.7 ITU-T Recommendation H.248.14 (2002): “Gateway control protocol: Inactivity timer package“. ETSI ETSI TS 183 025 V2.5.1 (2009-04)9i.8 ITU-T Recommendation H.248.11 (2002): “Gateway control protocol: Media Gateway Overload Control package“. i.9 ETSI ES 283 039-4 (V2

46、.1.1): “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Overload Control Architecture; Part 4: Adaptative Control for the MGC“. i.10 ITU-T Recommendation H.248.40 (2007): “Gateway control protocol: Application Data Inactivity Detection package“.

47、 i.11 IETF RFC 4268: “Entity State MIB“. i.12 ITU-T Recommendation X.731: “Information technology - Open Systems Interconnection - Systems management: State management function“. i.13 ITU-T Recommendation H.248.8: “ Gateway control protocol: Error code and service change reason description “. 3 Defi

48、nitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: control association: H.248 Control Association is defined in clause F.2/H.248.1 version 3 i.5 H.248 entity: any primary or secondary MGC or MG may be also denoted as H.248 e

49、ntity NOTE 1: An H.248 entity relates to a Functional Entity (FE), any implementation of an H.248 entity is mapping the functional entity on a Physical Entity (PE). NOTE 2: E.g. a virtual MG (VMG) is a H.248 FE. Multiple VMGs are realized in a single physical MG, which relates to an H.248 PE. NOTE 3: Physical entities are sometimes also denoted as “platform“ or “processor“. primary Media Gateway (MG): no explicit definition in H.248 NOTE: The primary MG is rather implicitly defined. See mainly ITU-T Recommendation H.248.1 version