ETSI TS 125 113-2017 Universal Mobile Telecommunications System (UMTS) Base station (BS) and repeate electromagnetic compatibility (EMC) (V14 0 0 3GPP TS 25 113 version 14 0 0 Rele.pdf

《ETSI TS 125 113-2017 Universal Mobile Telecommunications System (UMTS) Base station (BS) and repeate electromagnetic compatibility (EMC) (V14 0 0 3GPP TS 25 113 version 14 0 0 Rele.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 113-2017 Universal Mobile Telecommunications System (UMTS) Base station (BS) and repeate electromagnetic compatibility (EMC) (V14 0 0 3GPP TS 25 113 version 14 0 0 Rele.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 113 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Base station (BS) and repeate electromagnetic compatibility (EMC) (3GPP TS 25.113 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 113 V14.0.0 (2017-04)13GPP TS 25.113 version 14.0.0 Release 14Re

2、ference RTS/TSGR-0425113ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The

3、present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of

4、 ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware th

5、at the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following service

6、s: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall

7、 not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for

8、the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS

9、 125 113 V14.0.0 (2017-04)23GPP TS 25.113 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-m

10、embers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursu

11、ant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present docu

12、ment. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references

13、to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “ca

14、n“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 113 V14.0.0 (2017-04)33GPP TS 25.113 version 1

15、4.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 9g34 Test conditions . 10g34.1 General . 10g34.2 Arrangements

16、 for establishing a communication link 10g34.2.1 Multiple enclosure BS solution . 10g34.3 Narrow band responses on receivers 10g34.3.1 FDD and 3,84 Mcps TDD option . 10g34.3.2 1,28 Mcps TDD option . 11g34.4 Test condition for Repeater 11g34.4.1 Arrangements for test signals for repeaters . 11g34.5 E

17、xclusion bands 12g34.5.1 Transmitter exclusion band . 12g34.5.2 Receiver exclusion band . 12g34.6 BS test configurations 13g35 Performance assessment . 13g35.1 General . 13g35.2 Assessment of BLER in Downlink . 14g35.3 Assessment of BLER in Uplink . 14g35.4 Ancillary equipment . 14g35.5 Repeaters 14

18、g36 Performance Criteria 14g36.1 Performance criteria for continuous phenomena for BS 14g36.2 Performance criteria for transient phenomena for BS 15g36.3 (void) 15g36.4 Performance criteria for continuous phenomena for Ancillary equipment . 15g36.5 Performance criteria for transient phenomena for An

19、cillary equipment 16g36.6 (void) 16g36.7 Performance criteria for continuous phenomena for repeaters . 16g36.8 Performance criteria for transient phenomena for repeaters . 16g36.9 (void) 17g37 Applicability overview . 17g37.1 Emission . 17g37.2 Immunity 18g37.3 Applicability of requirements in TS 37

20、.113 . 18g38 Emission . 20g38.1 Methods of measurement and limits for EMC emissions . 20g38.2 Test configurations . 20g38.3 Radiated emission from Base station, Repeater and ancillary equipment 20g38.3.1 Radiated emission, Base stations and Repeater 20g38.3.1.1 Definition 20g38.3.1.2 Test method . 2

21、0g38.3.1.2.1 FDD and 3,84 Mcps TDD option 20g3ETSI ETSI TS 125 113 V14.0.0 (2017-04)43GPP TS 25.113 version 14.0.0 Release 148.3.1.2.2 1,28 Mcps TDD option 21g38.3.1.3 Limits 21g38.3.1.3.1 FDD and 3,84 Mcps TDD option 21g38.3.1.3.2 1,28 Mcps TDD option 22g38.3.1.4 Interpretation of the measurement r

22、esults 22g38.3.2 Radiated emission, Ancillary equipment 23g38.3.2.1 Definition 23g38.3.2.2 Test method . 23g38.3.2.3 Limits 23g38.4 Conducted emission DC power input/output port 23g38.4.1 Definition 24g38.4.2 Test method 24g38.4.3 Limits 24g38.5 Conducted emissions, AC mains power input/output port

23、. 24g38.5.1 Definition 24g38.5.2 Test method 24g38.5.3 Limits 25g38.6 Harmonic Current emissions (AC mains input port) 25g38.7 Voltage fluctuations and flicker (AC mains input port) . 25g38.8 Telecommunication ports . 25g38.8.1 Definition 25g38.8.2 Test method 25g38.8.3 Limits 26g39 Immunity 26g39.1

24、 Test methods and levels for immunity tests . 26g39.2 Test configurations . 26g39.3 RF electromagnetic field (80 MHz - 1000 MHz, 1400 MHz to 2700 MHz) 27g39.3.1 Definition 27g39.3.2 Test method and level . 27g39.3.3 Performance criteria 28g39.4 Electrostatic discharge 28g39.4.1 Definition 28g39.4.2

25、Test method and level . 28g39.4.3 Performance criteria 28g39.5 Fast transients common mode 28g39.5.1 Definition 29g39.5.2 Test method and level . 29g39.5.3 Performance criteria 29g39.6 RF common mode (0,15 MHz - 80 MHz) 29g39.6.1 Definition 29g39.6.2 Test method and level . 30g39.6.3 Performance cri

26、teria 30g39.7 Voltage dips and interruptions 30g39.7.1 Definition 30g39.7.2 Test method and level . 30g39.7.3 Performance criteria 31g39.8 Surges, common and differential mode 31g39.8.1 Definition 31g39.8.2 Test method and level . 31g39.8.2.1 Test method for telecommunication ports directly connecte

27、d to outdoor cables 31g39.8.2.2 Test method for telecommunication ports connected to indoor cables . 32g39.8.2.3 Test method for AC power ports . 32g39.8.3 Performance criteria 32g3Annex A (informative): Change History 33g3History 34g3ETSI ETSI TS 125 113 V14.0.0 (2017-04)53GPP TS 25.113 version 14.

28、0.0 Release 14Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an

29、 identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of

30、substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification. ETSI ETSI TS 125 113 V14.0.0 (2017-04)63GPP TS 25.113 version 14.0.0 Release 141 Scope The present document covers the assessme

31、nt of base stations, repeaters and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC). The present document specifies the applicable test conditions, performance assessment and performance criteria for base stations, repeaters and associated ancillary equipment in one o

32、f the following categories: - base stations for the FDD mode of UTRA meeting the requirements of TS 25.104 1, with conformance demonstrated by compliance to TS 25.141 3. - base stations for both options of the TDD mode of UTRA meeting the requirements of TS 25.105 2, with conformance demonstrated by

33、 compliance to TS 25.142 4. The two options are the 3,84 Mcps and 1,28 Mcps options respectively. The requirements are listed in different subsections only if the parameters deviate. - repeaters for the FDD mode of UTRA meeting the requirements of TS 25.106 10, with conformance demonstrated by compl

34、iance to TS 25.143 11. Technical requirements related to the antenna port of base stations or repeaters are not included in the present document. These are found in the relevant product standards 1, 2, 3, 4, 10, 11. The environment classification used in the present document refers to the residentia

35、l, commercial and light industrial environment classification used in IEC 61000-6-1 5 and IEC 61000-6-3 6. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cove

36、r extreme cases which may occur in any location but with low probability of occurrence. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edi

37、tion number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the lates

38、t version of that document in the same Release as the present document. 1 3GPP TS 25.104: “UTRA (BS) FDD; Radio transmission and reception“. 2 3GPP TS 25.105: “UTRA (BS) TDD; Radio transmission and reception“. 3 3GPP TS 25.141: “UTRA (BS) FDD; Base station conformance testing (FDD)“. 4 3GPP TS 25.14

39、2: “UTRA (BS) TDD; Base station conformance testing (TDD)“. 5 IEC 61000-6-1: 2005; “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments“. 6 IEC 61000-6-3: 2006/AMD1:2010: “Electromagnetic compatibility (E

40、MC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light industrial environments“. 7 IEC 60050(161): “International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility“. 8 3GPP TS 25.101: “UTRA (UE) FDD; UE Radio transmission and recep

41、tion (FDD)“. 9 3GPP TS 25.102: “UTRA (UE) TDD: UE Radio transmission and reception (TDD)“. ETSI ETSI TS 125 113 V14.0.0 (2017-04)73GPP TS 25.113 version 14.0.0 Release 1410 3GPP TS 25.106: “UTRA Repeater; Radio Transmission and Reception“. 11 3GPP TS 25.143: “UTRA Repeater conformance testing“. 12 I

42、TU-R Rec. SM.329: “Unwanted emissions in the spurious domain“. 13 CISPR 22: “Limits and methods of measurement of radio disturbance characteristics of information technology equipment“. 14 CISPR 16-1-1: “Specification for radio disturbance and immunity measuring apparatus and methods - Measuring app

43、aratus“. 15 IEC 61000-3-2 (2004): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current 16 A)“. 16 IEC 61000-3-3 (2002): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations a

44、nd flicker in low-voltage supply systems for equipment with rated current 16 A“. 17 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 18 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: T

45、esting and measurement techniques - Section 3: Radiated, radio-frequency electromagnetic field immunity test“. 19 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test“. 20 IEC 61000-4-5: “Electroma

46、gnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test“. 21 IEC 61000-4-6: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to contacted disturbances, induced by radio frequency fields“. 22 IEC 6

47、1000-4-11: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations. Immunity tests“. 23 ITU-R Recommendation SM.1539 (2001): “Variation of the boundary between the out-of-band and spurious domains requir

48、ed for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. 24 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 25 IEC 61000-3-12 (2005): “Electromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for harmonic current produced by equipment connected to public low-voltage sy

49、stem with input current 16 A and 75 A. 26 IEC 61000-3-11 (2000): “Electromagnetic compatibility (EMC) - Part 3-11: Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 75 A and subject to conditional connections“3Definitions, symbols and abbreviations 27 3GPP TS 37.113: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibility (EMC)”. 3 Definitions, symbols and abbreviation