ETSI TS 123 011-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Technical realization of Supplementary Services (V13 0 .pdf

《ETSI TS 123 011-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Technical realization of Supplementary Services (V13 0 .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 123 011-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Technical realization of Supplementary Services (V13 0 .pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelTechnical realiza(3GPP TS 23.0floppy3TECHNICAL SPECIFICATION123 011 V13.0.0 (2016communications system (Phaelecommunications System (ation of Supplementary Serv.011 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UMTS); rvices

2、13) TEM FOR ICATIONSRETSI ETSI TS 123 011 V13.0.0 (2016-01)13GPP TS 23.011 version 13.0.0 Release 13Reference RTS/TSGC-0423011vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/

4、or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If y

6、ou find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and mi

7、crofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All right

8、s reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and ow

9、ned by the GSM Association. ETSI ETSI TS 123 011 V13.0.0 (2016-01)23GPP TS 23.011 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publi

10、cly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI

11、Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or m

12、ay become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These sh

13、ould be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “m

14、ay“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 011 V1

15、3.0.0 (2016-01)33GPP TS 23.011 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g31.1 References 5g31.2 Abbreviations . 6g32 Activation, deactivation, registration, erasure, interrogation and invocation . 6g32.1 General

16、 . 6g32.1.1 Definition of “state vectors“ 7g32.1.2 Handling of service states at the HLR 8g32.1.2.1 Encoding of SS-Status. 8g32.1.2.2 Invocation of services at the HLR . 8g32.1.3 Handling of SS-Status at the VLR or the SGSN . 9g32.1.3.1 Invocation of services at the VLR or the SGSN 9g32.1.3.2 Interr

17、ogation of the service at the VLR and notifications from VLR 9g32.1.4 Handling of SS-Status at the MS 9g32.2 Handling of call independent SS procedures with respect to basic service groups 9g32.3 Exceptional handling of basic service codes 10g33 Password handling 14g33.1 General . 14g33.2 Registrati

18、on of password 20g33.3 Use of password . 20g33.4 Deactivation . 22g34 Supplementary service data management 23g35 Format of description . 23g3Annex A (informative): Change history . 24g3History 25g3ETSI ETSI TS 123 011 V13.0.0 (2016-01)43GPP TS 23.011 version 13.0.0 Release 13Foreword This Technical

19、 Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document describes the general aspects on how supplementary services within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following

20、formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG f

21、or approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document.

22、 ETSI ETSI TS 123 011 V13.0.0 (2016-01)53GPP TS 23.011 version 13.0.0 Release 131 Scope The present document describes the general aspects on how supplementary services in the 3GPP system are realised from a technical point of view. Description of technical realisation for specific supplementary ser

23、vices can be found in 3GPP TS 23.072, 230.8x and 230.9x-series technical specifications. All supplementary services may require signalling on the radio path. Signalling procedures and messages used are defined in the 3GPP TS 24.072, 24.08x and 24.09x-series of technical specifications. For some supp

24、lementary services information needs to be transferred between the Home Location Register (HLR), the Visitor Location Register (VLR), the Mobile services Switching Centre (MSC) and the Serving GPRS Support Node (SGSN). Signalling procedures for such information transfer are defined in 3GPP TS 29.002

25、. Definitions and descriptions of supplementary services are given in the 3GPP TS 22.072, 22.08x and 22.09x-series of technical specifications. Definitions are given in 3GPP TS 22.004 NOTE: The technical specifications on the technical realisation of supplementary services do not distinguish between

26、 subscriber, user and customer, since all three do not fully cover the textual needs. Generally the term “subscriber“ is used, even if this person is not having the subscription. 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of

27、 the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP

28、 document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 21.905: “3G Vocabulary“. 2 3GPP TS 22.004: “General on Supplementary Services“. 3 3GPP TS 22.030: “Man-Machine Interface (MMI

29、) of the Mobile Station (MS)“. 4 3GPP TS 23.081: “Line Identification Supplementary Services - Stage 2“. 5 3GPP TS 23.082: “Call Forwarding (CF) Supplementary Services - Stage 2“. 6 3GPP TS 23.083: “Call Waiting (CW) and Call Hold (HOLD) Supplementary Service - Stage 2“. 7 3GPP TS 23.084: “MultiPart

30、y (MPTY) Supplementary Service - Stage 2“. 8 3GPP TS 23.085: “Closed User Group (CUG) Supplementary Service - Stage 2“. 9 3GPP TS 23.086: “Advice of Charge (AoC) Supplementary Service - Stage 2“. 10 3GPP TS 23.088: “Call Barring (CB) Supplementary Service - Stage 2“. 11 3GPP TS 23.090: “Unstructured

31、 Supplementary Service Data (USSD) - Stage 2“. 12 3GPP TS 24.080: “Mobile radio Layer 3 Supplementary Service specification - Formats and coding“. ETSI ETSI TS 123 011 V13.0.0 (2016-01)63GPP TS 23.011 version 13.0.0 Release 1313 3GPP TS 24.081: “Line Identification Supplementary Service - Stage 3“.

32、14 3GPP TS 24.082: “Call Forwarding Supplementary Service - Stage 3“. 15 3GPP TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) Supplementary Service - Stage 3“. 16 3GPP TS 24.084: “MultiParty (MPTY) Supplementary Service - Stage 3“. 17 3GPP TS 24.085: “Closed User Group (CUG) Supplementary Service

33、 - Stage 3“. 18 3GPP TS 24.086: “Advice of Charge (AoC) Supplementary Service - Stage 3“. 19 3GPP TS 24.088: “Call Barring (CB) Supplementary Service - Stage 3“. 20 3GPP TS 24.090: “Unstructured Supplementary Service Data (USSD) - Stage 3“. 21 3GPP TS 29.002: “Mobile Application Part (MAP)“. 1.2 Abb

34、reviations Abbreviations used in the present document are listed in 3GPP TS 21.905. 2 Activation, deactivation, registration, erasure, interrogation and invocation 2.1 General Activation, deactivation, registration, erasure, interrogation and invocation are defined independently from a particular su

35、pplementary service. Whether they are applicable to a particular supplementary service or not is defined in the corresponding 3GPP TS 23.08x and 23.09x-series. Activation, deactivation, registration, erasure and invocation are applicable for CS domain. For PS domain o nly invocation of call barring

36、of SMS is applicable. The invocation of a supplementary service is executed as described in the corresponding stage 2 description and always includes an MSC and a location register for CS domain and an SGSN for PS domain. When an MSC receives a request for either activation/deactivation or registrat

37、ion/erasure or an interrogation, it invokes one of the following procedures. The MSC then can: - contact only the current VLR (e.g. interrogation of a call forwarding conditional supplementary service); - contact only the HLR (e.g. interrogation of the supplementary service call forwarding unconditi

38、onal); - contact the HLR, after which the HLR updates the VLR (e.g. registration of a forwarding number for a conditional call forwarding supplementary service). Which of the above listed procedures is applied for a call independent supplementary service operation is described in the corresponding 3

39、GPP TS 23.08x and 23.09x -series. Successful activation, deactivation, registration and erasure change the service state at the HLR. These transitions (if applicable to a particular service) are defined in the 3GPP TS 23.08x and 23.09x -series. Note that the HLR may also change the service state due

40、 to “HLR Induction“ (see subclause 2.1.1). In connection with supplementary service operations the served subscriber or remote subscribers may get notifications from the network. . If an SGSN receives a request for registration, erasure, activation, deactivation, interrogation or change of password,

41、 it shall return an error to the MS. ETSI ETSI TS 123 011 V13.0.0 (2016-01)73GPP TS 23.011 version 13.0.0 Release 132.1.1 Definition of “state vectors“ In order to provide a tool to define service states the concept of a “state vector“ is introduced. The state vector is used to represent the state o

42、f the service in terms of four variables: 1) Provisioning State, possible values are “Provisioned“ or “Not Provisioned“; 2) Registration State, possible values are “Registered“, “Erased“, or “Not Applicable“; 3) Activation State, possible values are “Not Active“, “Active and Operative“ or “Active an

43、d Quiescent“; 4) HLR Induction State, possible values are “Induced“ or “Not Induced“. The state vector represents the state of the service by using all four variables together. The state vector is represented using the notation: (Provisioning State, Registration State, Activation State, HLR Inductio

44、n State) e.g.: (Provisioned, Registered, Not Active, Not Induced). Note that the state vector is a logical (not a physical) representation of the service state. Note also that though some parts of the state vector are similar to elements of SS-Status the mapping between the state vector and SS-Statu

45、s is not one to one. The use of state vectors is not intended to specify any particular implementation internally in a node. There is a relationship specified between the state vector and parts of the transfer syntax. This relationship is not a direct one-to-one mapping. The following text specifies

46、 the semantics of each variable in the state vector. The three variables “Provisioning State“, “Registration State“ and “Activation State“ are used to represent the state of the service according to the normal behaviour based on service provider and user actions. The “HLR Induction State“ records wh

47、ether or not the HLR has temporarily induced the service (e.g. if the VLR does not support CUG, the HLR may induce an outgoing barring service). The Provisioning State, Registration State and Activation State are not affected by HLR induction of a service. Provisioning State - has value “provisioned

48、“, if the subscriber has a subscription to the service; - has value “Not Provisioned“ otherwise. Registration State - has value “Not Applicable“, if registration is not applicable to the service; - has value “Registered“, if registration is applicable, and there is registration data available; - has

49、 value “Erased“ otherwise. Activation State - has value “Active and Operative“, if the service is in a state where it can be invoked (and this is not due to HLR induction); - has value “Active and Quiescent“, if the service is in a state where it cannot be invoked, but where it will automatically move to the “Active and Operative“ state when conflicting conditions are removed; - has value “Not Active“ otherwise. ETSI ETSI TS 123 011 V13.0.0 (2016-01)83GPP TS 23.011 version 13.0.0 Release 13HLR Induction State - has the value “In