ETSI TS 102 515-2006 Methods for Testing and Specification (MTS) Internet Protocol Testing (IPT) IPv6 Core Protocol Conformance Test Suite Structure and Test Purposes (TSS&TP)《测试方法_1.pdf

《ETSI TS 102 515-2006 Methods for Testing and Specification (MTS) Internet Protocol Testing (IPT) IPv6 Core Protocol Conformance Test Suite Structure and Test Purposes (TSS&TP)《测试方法_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 515-2006 Methods for Testing and Specification (MTS) Internet Protocol Testing (IPT) IPv6 Core Protocol Conformance Test Suite Structure and Test Purposes (TSS&TP)《测试方法_1.pdf（117页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 515 V1.1.1 (2006-04)Technical Specification Methods for Testing and Specification (MTS);Internet Protocol Testing (IPT);IPv6 Core Protocol;Conformance Test Suite Structure andTest Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, whi

2、ch is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs no

3、t referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Methods for Testing and Specification (MTS). ETSI ETSI TS 102 515 V

4、1.1.1 (2006-04) 5 1 Scope The purpose of the present document is to provide Test Suite Structure and Test Purposes (TSS Internet Protocol Testing (IPT); IPv6 Core Protocol; Requirements Catalogue“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodo

5、logy and framework - Part 1: General concepts“. 4 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. 5 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profil

6、e conformance testing specifications; Standardization methodology“. 6 IETF RFC 1981: “Path MTU Discovery for IP version 6“. 7 IETF RFC 2374: “An IPv6 Aggregatable Global Unicast Address Format“. 8 IETF RFC 2460: “Internet Protocol, Version 6 (IPv6) Specification“. 9 IETF RFC 2461: “Neighbor Discover

7、y for IP Version 6 (IPv6)“. 10 IETF RFC 2462: “IPv6 Stateless Address Autoconfiguration“. 11 IETF RFC 2463: “Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification“. 12 IETF RFC 2675: “IPv6 Jumbograms“. 13 IETF RFC 2711: “IPv6 Router Alert Option“. 14 IET

8、F RFC 2894: “Router Renumbering for IPv6“. 15 IETF RFC 3484: “Default Address Selection for Internet Protocol version 6 (IPv6)“. 16 IETF RFC 3513: “Internet Protocol Version 6 (IPv6) Addressing Architecture“. 1 ETSI TS 102 351: “Methods for Testing and Specification (MTS); Internet Protocol Testing

9、(IPT); IPv6 Testing: Methodology and Framework“. ETSI ETSI TS 102 515 V1.1.1 (2006-04) 6 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: abstract test case: Refer to ISO/IEC 9646-1 3. Abstract Test Method (ATM): Ref

10、er to ISO/IEC 9646-1 3. Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 3. Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 3. Lower Tester (LT): Refer to ISO/IEC 9646-1 3. Test Purpose (TP): Refer to ISO/IEC 9646-1 3. 3.2 Abbreviations For the purposes of the present document, the follow

11、ing abbreviations apply: ATS Abstract Test Suite IETF Internet Engineering Task Force IPv4 Internet Protocol version 4 IPv6 Internet Protocol version 6 IUT Implementation Under Test RC Requirements Catalogue RQ Requirement TP Test Purpose TSS Test Suite Structure UDP User Datagram Protocol UT Upper

12、Tester 4 Test Suite Structure (TSS) Test Purposes have been written for IPv6 nodes, hosts and routers according to the requirements (RQ) of the requirements catalogue (RC) in TS 102 514 2. Test purposes have been written for behaviours requested with “MUST“ or “SHOULD“, optional behaviour described

13、with “MAY“ or similar wording indicating an option has not been turned into test purposes. The test purposes have been divided into three groups: Group 1: Node tests (all sub-groups) Group 2: Host tests (only sub-groups that carry test purposes) Group 3: Router tests (only sub-groups that carry test

14、 purposes) The sub-grouping of these three group follows the structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full view on the relation between RQ and TSS&TP. Group 1 “

15、Node tests (NT)“ Group 1.1 “Generate IPv6 packets (GIP)“ Group 1.1.1 “Generate Extension Header (GEH)“ Group 1.1.1.1 “Generate Destination Options Header (GDOH)“ ETSI ETSI TS 102 515 V1.1.1 (2006-04) 7 Group 1.1.1.2 “Generate Routing Header (GRH)“ Group 1.1.1.3 “Generate Hop by Hop Header(GHHH)“ Gro

16、up 1.1.2 “Generate IPv6 Header(GIH)“ Group 1.1.3 “Discover PMTU(DPMTU)“ Group 1.1.3.1 “Multicast PMTU Discovery (MPMTUD)“ Group 1.2 “Process IPv6 packets (PIP)“ Group 1.2.1 “Process Extension Headers (PEH)“ Group 1.2.1.1 “Process Fragment Packets (PFP)“ Group 1.2.1.2 “Process Routing Header (PRH)“ G

17、roup 1.2.1.3 “Process Hop-By-Hop Header (PHBHH)“ Group 1.2.1.4 “Process Extension Header Options (PEHO)“ Group 1.2.2 “Process IPv6 Header (PIP6)“ Group 1.2.2.1 “Process Hop Limit (PHL)“ Group 1.2.1.4 Process Extension Header Options (PEHO)“ Group 1.2.2.2 “Process Traffic Class (PTC)“ Group 1.2.2.3 “

18、Process Flow Label (PHL)“ Group 1.2.2.4 “Process Checksum (PSC)“ Group 1.3 “Initialize (INI)“ Group 1.3.1 “Determine Default MTU (DDMTU)“ Group 1.3.2 “Configure Address CA)“ Group 1.3.2.1 “Manual Address Configuration (MAC)“ Group 1.3.2.2 “Stateless Autoconfiguration (SLAC)“ Group 1.3.2.2.1 “Form Li

19、nk-local Address (LLA)“ Group 1.3.2.2.2 “Process Invalid SA Syntax (PISAS)“ Group 1.3.2.3 “Stateful Autoconfiguration (SFAC)“ Group 1.3.2.4 “Simultaneous Stateless and Stateful Autocinfiguratio (SSSAC)“ Group 1.3.2.5 “Detect Duplicate Address (DAD)“ Group 1.3.2.5.1 “Duplicate Address Detection Timer

20、s and Counters (DADTMR)“ Group 1.3.2.6 “Assign Global Address (GA)“ Group 1.3.2.6.1 “Use of M-Bit (UMB)“ Group 1.3.2.6.2 “Use of O-Bit (UOB)“ Group 1.3.2.6.3 “Process the Prefix Information Option (PPIO)“ Group 1.4 “Address use (AU)“ Group 1.5 “ICMPv6 Functions (ICF)“ Group 1.5.1 “Protect ICMP Messa

21、ges from Attacks (PIMA)“ ETSI ETSI TS 102 515 V1.1.1 (2006-04) 8 Group 1.5.2 “Process ICMPv6 Messages (PIM)“ Group 1.5.2.1 “Process ICMPv6 Information Messages (PIIM)“ Group 1.5.2.1.1 “Process Echo Reply Message (PERPM)“ Group 1.5.2.1.2 “Process Echo Request Message (PERQM)“ Group 1.5.2.2 “Process I

22、CMPv6 Error Messages (PEM)“ Group 1.5.2.2.1 “Process Parameter Problem Message (PPPM)“ Group 1.5.2.2.2 “Process Time Exceeded Message (PTEM)“ Group 1.5.2.2.3 “Process Packet Too Big Message (PPTBM)“ Group 1.5.2.2.4 “Process Destination Unreachable Message (PDUM)“ Group 1.5.3 “Generate ICMPv6 Message

23、s (GIM)“ Group 1.5.3.1 “Generate ICMPv6 Information Messages (GIIM)“ Group 1.5.3.1.1 “Generate Echo Request Message (GERQM)“ Group 1.5.3.2 “Generate ICMPv6 Error Messages (GIEM)“ Group 1.5.3.2.1 “Generate Parameter Problem Message (GPPM)“ Group 1.5.3.2.2 “Generate Time Exceeded Message (GTEM)“ Group

24、 1.5.3.2.3 “Generate Message Too Big Message (GMTBM)“ Group 1.5.3.2.4 “Generate Destination Unreachable Message (GTEM)“ Group 1.5.3.2.4.1 “Destination Unreachable Code Field Value (DUCFV)“ Group 1.5.3.2.5 “Limit ICMP Bandwidth and Forwarding Costs (LIBFC)“ Group 1.5.3.3 “Determine ICMPv6 Message Sou

25、rce Address (DIMSA)“ Group 1.6 “Neighbour Discovery (ND)“ Group 1.6.1 “ND Protocol Constants and Default Values (NDPCDV)“ Group 1.6.2 “Address Resolution (AR)“ Group 1.6.2.1 “Address Resolution Behavior (ARB)“ Group 1.6.2.2 “Address Resolution Data Queue Handling (ARDQH)“ Group 1.6.3 “Neighbor Unrea

26、chability Detection (NUD)“ Group 1.6.3.1 “Neighbour Reachability Process (NRP)“ Group 1.6.3.1.1 “Start Neighbor Reachability Determination (SNRD)“ Group 1.6.3.1.2 “Determine Neighbor Reachability (DNR)“ Group 1.6.3.1.3 “Invalid Reachability Indications (IRI)“ Group 1.6.3.2 “Neighbor Reachability Pro

27、bing (NRP)“ Group 1.6.4 “Next Hop Determination (NHD)“ Group 1.6.5 “Using Options in Neighbor Discovery Messages (UONDM)“ Group 1.6.6 “Process Neighbor Discovery Messages (PND)“ Group 1.6.6.1 “Process Neighbor Solicitation (PND)“ ETSI ETSI TS 102 515 V1.1.1 (2006-04) 9 Group 1.6.6.1.1 “Discover Neig

28、hbor by NS (DNNS)“ Group 1.6.6.1.2 “Process Proxy NS (PPNS)“ Group 1.6.6.1.3 “Process Anycast NS (PANS)“ Group 1.6.6.1.4 “Process NS for Address Resolution (PNSAR)“ Group 1.6.6.1.5 “Process Field Anomalies in NS (NSFA)“ Group 1.6.6.1.6 “Process Option Anomalies in NS (NSOA)“ Group 1.6.6.2 “Process N

29、eighbor Advertisement (PNA)“ Group 1.6.6.2.1 “Process Solicited Neighbor Advertisement (PSNA)“ Group 1.6.6.2.2 “Process Unsolicited Neighbor Advertisement (PUNA)“ Group 1.6.6.2.3 “Discover Neighbor by NA (DNNA)“ Group 1.6.6.2.4 “Process Field Anomalies in NA (PFANA)“ Group 1.6.6.2.5 “Process Option

30、Anomalies in NA (POANA)“ Group 1.6.6.3 “Process Router Solicitation (PRA)“ Group 1.6.6.3.1 “Discover Neighbor by RS (DNRS)“ Group 1.6.6.3.2 “Router Processing of RS (RPRS)“ Group 1.6.6.3.3 “Host Processing of RS (HPRS)“ Group 1.6.6.3.4 “Process Field Anomalies in RS (PFARS)“ Group 1.6.6.3.5 “Process

31、 Option Anomalies in RS (POARS)“ Group 1.6.6.4 “Process Router Advertisement (PRA)“ Group 1.6.6.4.1 “Discover Neighbor by RA (DNRA)“ Group 1.6.6.4.2 “Router Processing of RA (RPRA)“ Group 1.6.6.4.3 “Host Processing of RA (HPRA)“ Group 1.6.6.4.4 “Process Field Anomalies in RA (PFARA)“ Group 1.6.6.4.5

32、 “Process Option Anomalies in RA (PAORA)“ Group 1.6.6.5 “Process Redirect Message (PRM)“ Group 1.6.6.5.1 “Discover Neighbor by Redirect Message (DNRM)“ Group 1.6.6.5.2 “Router Processing of Redirect Message (RPRM)“ Group 1.6.6.5.3 “Host Processing of Redirect Message (HPRM)“ Group 1.6.6.5.4 “Process

33、 Field Anomalies in Redirect Message (PFARM)“ Group 1.6.6.5.5 “Process Option Anomalies in Redirect Message (POARM)“ Group 1.6.7 “Generate Neighbor Discovery Messages (GNDM)“ Group 1.6.7.1 “Generate Neighbor Solicitation (GNS)“ Group 1.6.7.1.1 “Generate Neighbor Solicitation Header (GNSH)“ Group 1.6

34、.7.1.2 “Generate Neighbor Solicitation Option (GNSO)“ Group 1.6.7.1.3 “Generate NS for Address Resolution (GNSAR)“ ETSI ETSI TS 102 515 V1.1.1 (2006-04) 10Group 1.6.7.2 “Generate Neighbor Advertisement (GNA)“ Group 1.6.7.2.1 “Generate Unsolicited Neighbor Advertisement (GUNA)“ Group 1.6.7.2.1.1 “For

35、m Unsolicited NA Header (FUNAH)“ Group 1.6.7.2.1.2 “Generate Unsolicited Proxy NA (GUPNA)“ Group 1.6.7.2.1.3 “Generate Unsolicited Anycast NA (GUANA)“ Group 1.6.7.2.2 “Form Neighbor Advertisement Header (FNAH)“ Group 1.6.7.3 “Generate Router Solicitation (GRA)“ Group 1.6.7.4 “Generate Router Adverti

36、sement (GRA)“ Group 1.6.7.5 “Generate Redirect Message (GRM)“ Group 1.7 “Address Architecture (AA)“ Group 1.8 “Jumbograms (JG)“ Group 1.8.1 “TCP Jumbograms (TCPJG)“ Group 1.8.2 “UDP Jumbograms (UDPJG)“ Group 1.8.3 “Process Jumbograms (PJG)“ Group 1.8.4 “Generate Jumbograms (GJG) Group 2 “Host (HS)“

37、Group 2.3 “Initialize (INI)“ Group 2.3.2.2.1 “Form Link-local Address (LLA)“ Group 2.3.2.6 “Assign Global Address (GA)“ Group 2.3.2.6.1 “Use of M-bit (UMB)“ Group 2.3.2.6.2 “Use of O-Flag (UOB)“ Group 2.3.2.6.3 “Process the Prefix Information Option (PFX)“ Group 2.6 “Neighbour Discovery (ND)“ Group

38、2.6.1 “ND Protocol Constants and Default Values (NDPCDV)“ Group 2.6.6.1.4 “Process NS for Address Resolution (PNSAR)“ Group 2.6.6.3.3 “Host Processing of RS (HPRS)“ Group 2.6.6.4.3 “Host Processing of RA (HPRA)“ Group 2.6.6.4.5 “Process Option Anomalies in RA (POARA)“ Group 2.6.6.5.3 “Host Processin

39、g of Redirect Message (HPRM)“ Group 2.6.6.5.4 “Process Field Anomalies in Redirect Message (PFARM)“ Group 2.6.6.5.5 “Process Option Anomalies in Redirect Message (POARM)“ Group 2.6.7.3 “Generate Router Solicitation (GRS)“ Group 2.6.7.3.1 “Generate Router Solicitation Header (GRSH)“ Group 2.6.7.3.2 “

40、Generate RS Source Link-layer Address Option (GRSSLAO)“ Group 2.6.7.3.3 “Router Solicitation Behavior (RSB)“ ETSI ETSI TS 102 515 V1.1.1 (2006-04) 11Group 3 “Router (RT)“ Group 3.2 “Process IPv6 packets (PIP)“ Group 3.2.1.2 “Process Routing Header (PRH)“ Group 3.3 “Initialize (INI)“ Group 3.3.2 “Con

41、figure Address CA)“ Group 3.3.2.2 “Stateless Autoconfiguration (SAC)“ Group 3.3.2.2.1 “Form Link-local Address (LLA)“ Group 3.5 “ICMPv6 Functions (ICF)“ Group 3.5.2 “Process ICMPv6 Messages (PIM)“ Group 3.5.3.2.2 “Generate Time Exceeded Message (GTEM)“ Group 3.5.3.2.3 “Generate Message Too Big Messa

42、ge (GMTBM)“ Group 3.5.3.2.4 “Generate Destination Unreachable Message (GTEM)“ Group 3.5.3.2.4.1 “Destination Unreachable Code Field Value (DUCFV)“ Group 3.6 “Neighbour Discovery (ND)“ Group 3.6.1 “ND Protocol Constants and Default Values (NDPCDV)“ Group 3.6.2.1 “Address Resolution Behavior (ARB)“ Gr

43、oup 3.6.3.1.1 “Start Neighbor Reachability Determination (SNRD)“ Group 3.6.6.1.4 “Process NS for Address Resolution (PNSAR)“ Group 3.6.6.3 “Process Router Solicitation (PRS)“ Group 3.6.6.3.1 “Discover Neighbor by RS (DNRS)“ Group 3.6.6.3.2 “Router Processing of RS (RPRS)“ Group 3.6.6.3.4 “Process Fi

44、eld Anomalies in RS (PFARS)“ Group 3.6.6.3.5 “Process Option Anomalies in RS (POARS)“ Group 3.6.6.5.2 “Router Processing of Redirect Message (RPRM)“ Group 3.6.7.2 “Generate Neighbor Advertisement (GNA)“ Group 3.6.7.2.1.2 “Generate Unsolicited Proxy NA (GUPNA)“ Group 3.6.7.4 “Generate Router Advertis

45、ement (GRA)“ Group 3.6.7.4.1 “Form Router Advertisement Header (FRAH)“ Group 3.6.7.4.2 “Form Router Advertisment Options (FRAO)“ Group 3.6.7.4.2.1 “RA MTU Option (RAMTUO)“ Group 3.6.7.4.2.2 “RA Source Link-layer Address Option (RASLAO)“ Group 3.6.7.4.2.3 “RA Prefix Information Option (RAPIO)“ Group

46、3.6.7.4.3 “Router Advertisement Behavior (RAB)“ Group 3.6.7.4.3.1 “Startup Router Advertisement Behavior (SRAB)“ Group 3.6.7.4.3.1.1 “AdvCurHopLimit (ACHL)“ ETSI ETSI TS 102 515 V1.1.1 (2006-04) 12Group 3.6.7.4.3.1.2 “AdvDefaultLifetime (ADL)“ Group 3.6.7.4.3.1.3 “AdvManagedFlag (AMF)“ Group 3.6.7.4

47、.3.1.4 “AdvOtherConfigFlag (AOCF)“ Group 3.6.7.4.3.1.5 “AdvReachableTime (ART)“ Group 3.6.7.4.3.1.6 “AdvRetransTimer (ADRT)“ Group 3.6.7.4.3.1.7 “MaxRtrAdvInterval (MAXRAI)“ Group 3.6.7.4.3.1.8 “MinRtrAdvInterval (MINRAI)“ Group 3.6.7.4.3.2 “Router Advertisement Behavior on Reconfiguration (RABR)“ G

48、roup 3.6.7.5 “Generate Redirect Message (GRM)“ Group 3.6.7.5.1 “Generate Redirect Options (GRO)“ Group 3.6.7.5.2 “Determine Redirect Target Address Field (DRTA)“ 5 Test Purposes (TP) The test purposes have been written in the formal notation TPlan as described in annex A of DTS/MTS-IPT-0001 1 Group

49、1 “Node tests (NT)“ Group 1.1 “Generate IPv6 packets (GIP)“ Group 1.1.1 “Generate Extension Header (GEH)“ xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP Id : TP_COR_1092_01 summary : Send 59 in last IPv6 header RQ Ref : RQ_COR_1092 TC Ref : TC_COR_1092_01 with IUT Node and IUT ready to generate IPv6 packets ensure that when IUT generates IPv6 packet containing one or more extension headers then IUT sends IPv6 packet containing a Next Header field in the last extensio