ETSI TS 101 220-2018 Smart Cards ETSI numbering system for telecommunication application providers (V15 0 0 Release 15).pdf

《ETSI TS 101 220-2018 Smart Cards ETSI numbering system for telecommunication application providers (V15 0 0 Release 15).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 101 220-2018 Smart Cards ETSI numbering system for telecommunication application providers (V15 0 0 Release 15).pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 101 220 V15.0.0 (2018-01) Smart Cards; ETSI numbering system for telecommunication application providers (Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 101 220 V15.0.0 (2018-01)2Release 15Reference RTS/SCP-T070653vf00 Keywords GSM, ID, smart card, UMTS ETSI 650 Route des Lucioles F-06921

2、 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search T

3、he present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between suc

4、h versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on

5、 the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notificat

6、ion No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and

7、the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GP

8、P Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 101 220 V15.0.0 (2018-01)3Release 15Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Sc

9、ope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 9g34 Structure of the Application IDentifier (AID) 10g34.0 Introduction 10g34.1 Registered application provider IDentifier (RID) . 10g34.2 Pr

10、oprietary application Identifier eXtension (PIX) 10g35 Use of the Application IDentifier (AID) 11g36 Toolkit Application Reference (TAR) . 11g37 Tag-Length-Value (TLV) data objects . 12g37.1 TLV data object forms . 12g37.1.0 Introduction. 12g37.1.1 COMPREHENSION-TLV tag coding 12g37.1.1.0 Introducti

11、on . 12g37.1.1.1 Single byte format . 12g37.1.1.2 Three-byte format . 13g37.1.2 Length encoding . 13g37.2 Assigned TLV tag values . 13g38 UICC Java Card Services . 19g38.1 Service Names 19g3Annex A (normative): Allocated ETSI PIX numbers . 20g3Annex B (normative): Coding of the PIX for GSM and TETRA

12、 applications 21g3Annex C (normative): Coding of the PIX for SIM toolkit API packages . 22g3Annex D (normative): Allocated TAR values 23g3Annex E (normative): Allocated 3GPP PIX numbers 25g3Annex F (normative): Coding of the PIX for 3G UICC applications . 26g3Annex G (normative): Coding of the PIX f

13、or 3G USIM Toolkit Applications . 27g3Annex H (normative): Tag allocation guidelines . 28g3Annex I (normative): Coding of the PIX for UICC toolkit API packages . 29g3Annex J (normative): Coding of the PIX for (U)SIM API for Java Card packages . 30g3Annex K (normative): Coding of the PIX for ISIM API

14、 for Java Card package. 31g3Annex L (normative): Coding of the PIX for 3GPP Contact Manager API packages 32g3Annex M (normative): Allocated 3GPP2 PIX numbers 33g3ETSI ETSI TS 101 220 V15.0.0 (2018-01)4Release 15Annex N (normative): Allocated oneM2M PIX numbers . 34g3Annex O (informative): Bibliograp

15、hy . 35g3Annex P (informative): Change history . 36g3History 40g3ETSI ETSI TS 101 220 V15.0.0 (2018-01)5Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essenti

16、al IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates a

17、re available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) w

18、hich are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, an

19、d conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced

20、by ETSI Technical Committee Smart Card Platform (SCP). The contents of the present document are subject to continuing work within TC SCP and may change following formal TC SCP approval. If TC SCP modifies the contents of the present document, it will then be republished by ETSI with an identifying c

21、hange of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 0 early working draft; 1 presented to TC SCP for information; 2 presented to TC SCP for approval; 3 or greater indicates TC SCP approved document under change control. y the second digit is in

22、cremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “n

23、eed not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 101 220 V15.0.0 (

24、2018-01)6Release 151 Scope The present document provides for the administration of shared name spaces in use by applications on the UICC including the managed allocation of identifiers from these name spaces. 2 References 2.1 Normative references References are either specific (identified by date of

25、 publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. In the case of a reference to a TC SCP document, a non specif

26、ic reference implicitly refers to the latest version of that document in the same Release as the present document. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in th

27、is clause were valid at the time of publication ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 Void. 2 Recommendation ITU-T E.164: “The international public telecommunication numbering plan“. 3 ISO/IEC 7

28、816-4: “Identification cards - Integrated circuit cards - Part 4: Organization, security and commands for interchange“. 4 Recommendation ITU-T E.118: “The international telecommunication charge card“. 5 Void. 6 ETSI TS 151 011: “Digital cellular telecommunications system (Phase 2+); Specification of

29、 the Subscriber Identity Module - Mobile Equipment (SIM-ME) interface (3GPP TS 51.011)“. 7 ETSI TS 101 267: “Digital cellular telecommunications system (Phase 2+); Specification of the SIM Application Toolkit (SAT) for the Subscriber Identity Module - Mobile Equipment (SIM-ME) interface (3GPP TS 11.

30、14)“. 8 ETSI TS 143 019: “Digital cellular telecommunications system (Phase 2+); Subscriber Identity Module Application Programming Interface (SIM API) for Java Card; Stage 2 (3GPP TS 43.019)“. 9 ETSI EN 300 812-3: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (S

31、IM-ME) interface; Part 3: Integrated Circuit (IC); Physical, logical and TSIM application characteristics“. 10 ETSI TS 131 101: “Universal Mobile Telecommunications System (UMTS); LTE; UICC-terminal interface; Physical and logical characteristics (3GPP TS 31.101)“. 11 ETSI TS 131 102: “Universal Mob

32、ile Telecommunications System (UMTS); LTE; Characteristics of the Universal Subscriber Identity Module (USIM) application (3GPP TS 31.102)“. 12 ETSI TS 131 111: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Universal Subscriber

33、Identity Module (USIM) Application Toolkit (USAT) (3GPP TS 31.111)“. ETSI ETSI TS 101 220 V15.0.0 (2018-01)7Release 1513 ETSI TS 131 114: “Universal Mobile Telecommunications System (UMTS); LTE; Universal Subscriber Identity Module Application Toolkit (USAT) interpreter protocol and administration (

34、3GPP TS 31.114)“. 14 ETSI TS 131 103: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Characteristics of the IP Multimedia Services Identity Module (ISIM) application (3GPP TS 31.103)“. 15 ISO/IEC 8825-1: “Information technology -

35、 ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)“. 16 ISO/IEC 7816-6: “Identification cards - Integrated circuit cards - Part 6: Interindustry data elements for interchange“. 17 ETSI TS 102 241: “Smart Cards; UI

36、CC Application Programming Interface (UICC API) for Java Card (TM)“. 18 ETSI TS 131 130: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; (U)SIM Application Programming Interface (API); (U)SIM API for Java Card (3GPP TS 31.130)“. 1

37、9 ETSI TS 102 226: “Smart Cards; Remote APDU structure for UICC based applications“. 20 ETSI TS 131 116: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Remote APDU Structure for (U)SIM Toolkit applications (3GPP TS 31.116)“. 21 V

38、oid. 22 ETSI TS 102 474: “Digital Video Broadcasting (DVB); IP Datacast over DVB-H: Service Purchase and Protection“. 23 Void. 24 ETSI TS 131 133: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia Services Identity Mod

39、ule (ISIM) Application Programming Interface (API); ISIM API for Java Card (3GPP TS 31.133)“. 25 OMA-TS-Smartcard_Web_Server-V1_0: “Smartcard-Web-Server“. NOTE: See http:/www.openmobilealliance.org. 26 ETSI TS 102 225: “Smart Cards; Secured packet structure for UICC based applications“. 27 ETSI TS 1

40、31 221: “Universal Mobile Telecommunications System (UMTS); LTE; Contact Manager Application Programming Interface (API); Contact Manager API for Java Card (3GPP TS 31.221“. 28 3GPP2 C.S0065-0: “cdma2000 Application on UICC for Spread Spectrum Systems“. NOTE: Available at https:/www.3gpp2.org/Public

41、_html/Specs/C.S0065-0%20v1.0_060630.pdf. 29 Void. 30 GlobalPlatform: “Card Remote Application Management over HTTP Card Specification v2.2 - Amendment B“ v1.1.3. NOTE: See http:/www.globalplatform.org/. 31 OMA-TS-BCAST_Services-V1_1: “Mobile Broadcast Services“. NOTE: See http:/www.openmobileallianc

42、e.org. 32 ETSI TS 102 921: “Machine-to-Machine communications (M2M); mIa, dIa and mId interfaces“. ETSI ETSI TS 101 220 V15.0.0 (2018-01)8Release 1533 ISO/IEC 7816-5:2004: “Identification cards - Integrated circuit cards - Part 5: Registration of application providers“. 34 ETSI TS 118 103: “oneM2M;

43、Security Solutions (oneM2M TS-0003)“. 35 OMA-TS-LightweightM2M-V1-0: “Lightweight Machine to Machine“. 36 ETSI TS 131 104: “Universal Mobile Telecommunications System (UMTS); LTE; Characteristics of the Hosting Party Subscription Identity Module (HPSIM) application (3GPP TS 31.104)“. 37 GlobalPlatfo

44、rm: “Global Platform Card, Confidential Card Content Management, Card Specification v2.3 - Amendment A“, Version 1.1. NOTE: See http:/www.globalplatform.org/. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-

45、specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long

46、term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following t

47、erms and definitions apply: Application IDentifier (AID): data element, which identifies an application in a card NOTE: An AID may contain a Registered application provider IDentifier (RID). If it contains either a RID or an issuer identification number, then this identification is unambiguous (see

48、ISO/IEC 7816-4 3). Application Provider (AP): entity, which provides those components of an application on a card, required to perform the respective application NOTE: See ISO/IEC 7816-4 3. data object: structured data seen on an interface consisting of the concatenation of a mandatory tag field, a

49、mandatory length field and an optional value field tag: nominal datum that encodes the name of a data object telecommunication IC card application: application described by an ETSI document template: definition of a set of TLV data objects forming the value field of a constructed BER-TLV data object and a data object that realizes this definition Toolkit Application Reference (TAR): data element, which identifies an application in the toolkit mechanisms (e.g. SMS Data Download) ETSI ETSI