ETSI TR 134 926-2018 Universal Mobile Telecommunications System (UMTS) LTE Electromagnetic compatibility (EMC) Table of international requirements for mobile terminals and ancillar.pdf

《ETSI TR 134 926-2018 Universal Mobile Telecommunications System (UMTS) LTE Electromagnetic compatibility (EMC) Table of international requirements for mobile terminals and ancillar.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 134 926-2018 Universal Mobile Telecommunications System (UMTS) LTE Electromagnetic compatibility (EMC) Table of international requirements for mobile terminals and ancillar.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 134 926 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); LTE; Electromagnetic compatibility (EMC); Table of international requirements for mobile terminals and ancillary equipment (3GPP TR 34.926 version 15.0.0 Release 15) TECHNICAL REPORT ETSI ETSI TR 134 926 V15.0.0 (2

2、018-07)13GPP TR 34.926 version 15.0.0 Release 15Reference RTR/TSGR-0434926vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Pr

3、fecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not

4、be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secreta

5、riat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, pl

6、ease send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written pe

7、rmission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI regis

8、tered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETS

9、I ETSI TR 134 926 V15.0.0 (2018-07)23GPP TR 34.926 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly availab

10、le for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server

11、(https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,

12、essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reprodu

13、ce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project

14、(3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be

15、 found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of prov

16、isions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 134 926 V15.0.0 (2018-07)33GPP TR 34.926 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Sc

17、ope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g34 Table of International EMC Requirements for Mobile terminals and ancillary equipment . 8g3Annex A (informative): Change history . 12g3History 13g3ETSI ETSI TR 134 926 V15.0.0 (2018-07)43GPP TR 34.926 version 15.0.0 Rele

18、ase 15Foreword This Technical Report has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TR, it will be re-released by the TSG with an identifying ch

19、ange of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e.

20、 technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction This Technical Report is a living document and will continuously be upgraded as standards and regulations change. Sections will be add

21、ed for new regions or nations, which enter the 3GPP and have different requirements. It is the intention to reference global standards but where it is known that none exist then alternative standards mandated by the regional and or national requirements will be quoted. The sole purpose of the docume

22、nt is as a reference to the current status at time of publication. When new versions are published they will supersede the previous ones. ETSI ETSI TR 134 926 V15.0.0 (2018-07)53GPP TR 34.926 version 15.0.0 Release 151 Scope The present document shows in tabular form most of the current regulatory a

23、nd voluntary requirements by region or nation, and is for information purposes only. 2 References The following documents contain provisions, which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edi

24、tion number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the l

25、atest version of that document in the same Release as the present document. 1 IEC 61000-6-1 (1997): “Electromagnetic compatibility (EMC) Part 6: Generic standards - Section 1: Immunity standard for residential, commercial and light-industrial environments“. 2 IEC 61000-6-3 (1996): “Electromagnetic c

26、ompatibility (EMC) Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments. 3 ISO 7637-1 (1990): “Road vehicles - Electrical disturbance by conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V

27、supply voltage - Electrical transient conduction along supply lines only“. 4 ISO 7637-2 (1990): “Road vehicles - Electrical disturbance by conduction and coupling - Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only“. 5 RECOMMENDATI

28、ON ITU-R SM.329 “ Unwanted emissions in the spurious domain “ 6 IEC CISPR publication 22; 3rdedition (1997-11); “Information technology equipment; Radio disturbance characteristics Limits and methods of measurement“ 7 IEC CISPR publication 16-1; (1993); Radio disturbance and immunity measuring appar

29、atus“; Am.1 (1997); “Specification for radio disturbance and immunity measuring apparatus and methods“ 8 IEC 61000-3-2; (1995-03); “Electromagnetic compatibility; Part 3 - Limits; section 2 Limits for harmonic current emissions (equipment input current 16 A per phase)“; Am.1 (1997-09) 9 IEC 61000-3-

30、3; (1994-12); “Electromagnetic compatibility; Part 3 - Limits; section 2 Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A“ 10 IEC 61000-4-2; “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques section 2: El

31、ectrostatic discharge immunity test Basic EMC publication“ 11 IEC 61000-4-3; “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques section 3: Radiated, radio-frequency electromagnetic field immunity test“ 12 IEC 61000-4-4; “Electromagnetic compatibility (EMC) Part 4: Testin

32、g and measurement techniques section 4: Electrical fast transient/burst immunity test Basic EMC publication“ 13 IEC 61000-4-5; “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques section 5: Surge immunity test“ 14 IEC 61000-4-6; “Electromagnetic compatibility (EMC) Part 4

33、: Testing and measurement techniques section 6: immunity to conducted disturbances induced by radio frequency fields“ ETSI ETSI TR 134 926 V15.0.0 (2018-07)63GPP TR 34.926 version 15.0.0 Release 1515 IEC 61000-4-11; “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques sect

34、ion 11:Voltage dips, short interruptions, and voltage variations immunity test“ 16 EN 300 607 - 1; Digital cellular telecommunications system (Phase 2); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 4.24.0) 17 EN 55022; “Information technology

35、equipment; Radio disturbance characteristics Limits and methods of measurement“ 18 ARIB STD-T57 ; “ELECTROMAGNETIC COMPATIBILITY (EMC) FOR RADIO EQUIPMENT Edition 2.0 “ ARIB STANDARD 19 RCR STD-27 ; “PERSONAL DIGITAL CELLULAR TELECOMMUNICATION SYSTEM Edition H “ ARIB STANDARD 20 FCC CFR 47 part 15;

36、RADIO FREQUENCY DEVICES, Code of Federal Regulations Title 47, Volume 1, Parts 0 to 19 21 CWTS TS C404; China Wireless Telecommunication Standard (CWTS); Working Group 1 (WG1); UE and BTS EMC 22 ETSI EN 301 489; Electromagnetic compatibility and Radio Spectrum Matters /ERM); Electromagnetic Compatib

37、ility (EMC) standard for radio equipment and services; Part 1: “Common technical requirements“; Part 7: “Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)“;. Part 8: “Specific conditions for GSM base stations“

38、; Part 18: “Specific conditions for Terrestrial Trunked Radio (TETRA)“ Part 23: “ Specific conditions for 3rd Generation Partnership project (UMTS) Base station radio and ancillary equipment Part 24: “ Specific conditions for 3rd Generation Partnership project (UMTS) for Mobile and potable (UE) radi

39、o and ancillary equipment 3 Definitions and abbreviations 3.1 Definitions Ancillary equipment: Equipment (apparatus), used in connection with a user equipment (UE) is considered as an ancillary equipment (apparatus) if: - the equipment is intended for use in conjunction with a UE to provide addition

40、al operational and/or control features to the UE, (e.g. to extend control to another position or location); and - the equipment cannot be used on a stand alone basis to provide user functions independently of a UE; and - the UE to which it is connected, is capable of providing some intended operatio

41、n such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a sub-unit of the main equipment essential to the main equipment basic functions). Idle mode: Idle mode is the state of User Equipment (UE) when switched on but with no Radio Resource Control (RRC) connection. Po

42、rt: particular interface, of the specified equipment (apparatus), with the electromagnetic environment. For example, any connection point on an equipment intended for connection of cables to or from that equipment is considered as a port (see figure 1). ETSI ETSI TR 134 926 V15.0.0 (2018-07)73GPP TR

43、 34.926 version 15.0.0 Release 15Spurious emission from ITU-R SM 329: Emission on a frequency, or frequencies, which are outside the necessary bandwidth and the level of which may be reduced without affecting the corresponding transmission of information. Spurious emissions include harmonic emission

44、s, parasitic emissions, intermodulation products and frequency conversion products but exclude out-of-band emissions. NOTE For multi-channel or multi-carrier transmitters/transponders, where several carriers may be transmitted simultaneously from a final output amplifier or an active antenna, the ce

45、ntre frequency of the emission is taken to be the centre of the 3dB bandwidth of the transmitter or transponder. Telecommunication port: Ports which are intended to be connected to telecommunication networks (e.g. public switched telecommunication networks, integrated services digital networks), loc

46、al area networks (e.g. Ethernet, Token Ring) and similar networks (see CISPR 22). Transient phenomena: Pertaining to or designating a phenomena or a quantity which varies between two consecutive steady states during a time interval short compared with the time-scale of interest (IEC 60050-161 ). ETS

47、I ETSI TR 134 926 V15.0.0 (2018-07)83GPP TR 34.926 version 15.0.0 Release 154 Table of International EMC Requirements for Mobile terminals and ancillary equipment ETSI ETSI TR 134 926 V15.0.0 (2018-07)93GPP TR 34.926 version 15.0.0 Release 15SPEC ITEM AREA APPLIC. China 3GPP SPECS JAPAN EUROPE USA K

48、OREA REQMENT REF. DOC REQMENT REF. DOC REQMENT REF. DOC REQMENT REF. DOC REQMENT REF. DOC REQMENT REF. DOC RADIATED EMISSIONS Limits on Radiated Emission Vehicular, Portable, Ancillary, TS C404 TS 34.124 TS 25.113 TS 34.124 classA(Q-peak) 30MHz-230 MHz : 40dBuV/m 230MHz-1GHz : 47 dBuV/m classB(Q-pea

49、k) 30 MHz -230 MHz : 30 dBuV/m 230MHz-1GHz : 37 dBuV/m ARIB T-57 2.2 reference from CISPR22 *(measurement is under receiving condition) EN 300 607-1 Version 6 release 1997 class A (Q-peak) 30 MHz-230 MHz : 40dBuV/m 230MHz-1GHz : 47 dBuV/m classB (Q-peak) 30 MHz -230 MHz : 30 dBuV/m 230MHz-1GHz : 37 dBuV/m CISPR22 Transmit OFF power (idle m ode) TS 34.124 TS 25.113 TS 34.124 -60 dBm for PDC terminal RCR 27 (Standard for PDC) EN 300 607-1 Version 6 release 1997 Limits on Radiated Emissions A