ETSI EN 303 146-3-2016 Reconfigurable Radio Systems (RRS) Mobile Device (MD) information models and protocols Part 3 Unified Radio Application Interface (URAI) (V1 2 1)《可重构无线电系统(RR.pdf

《ETSI EN 303 146-3-2016 Reconfigurable Radio Systems (RRS) Mobile Device (MD) information models and protocols Part 3 Unified Radio Application Interface (URAI) (V1 2 1)《可重构无线电系统(RR.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 303 146-3-2016 Reconfigurable Radio Systems (RRS) Mobile Device (MD) information models and protocols Part 3 Unified Radio Application Interface (URAI) (V1 2 1)《可重构无线电系统(RR.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 303 146-3 V1.2.1 (2016-08) Reconfigurable Radio Systems (RRS); Mobile Device (MD) information models and protocols; Part 3: Unified Radio Application Interface (URAI) EUROPEAN STANDARD ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 2 Reference REN/RRS-0213 Keywords interface, mobile, SDR ETSI 650

2、Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.e

3、tsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived differen

4、ce in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change

5、 of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaf

6、f.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization o

7、f ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade

8、 Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology

9、 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Introduction 7g35 System Identification 9g35.1 Radio Computer Structure 9g35.2 URAI System Requirement Mapping. 10g36 Notational

10、 Tools . 12g36.1 Notational Tool for Information Model Classes . 12g36.2 Notational Tool for Interface Classes . 13g37 Information Model for Radio Computer 13g37.1 Radio Computer . 13g37.2 Class Definitions for Information Model . 16g38 Interface Definition 23g38.1 Interface Overview . 23g38.2 Radio

11、 Application Management Services 24g38.2.1 Overview on Radio Application Management Services . 24g38.2.2 Messages for Radio Application Management Services . 24g38.3 User Data Flow Services 25g38.3.1 Overview on User Data Flow Services . 25g38.3.2 Messages for User Data Flow Services . 25g38.4 Multi

12、radio Control Services . 26g38.4.1 Overview on Multiradio Control Services 26g38.4.2 Messages for Multiradio Control Services 26g38.5 Class Definitions for Interface 26g3Annex A (informative): Abstract Data Definitions 28g3Annex B (informative): URAI Qualification Methods for Validation . 32g3Histor

13、y 33g3ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be

14、found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR

15、 Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This

16、 European Standard (EN) has been produced by ETSI Technical Committee Reconfigurable Radio Systems (RRS). The present document is part 3 of a multi-part deliverable covering the Mobile Device (MD) information models and protocols, as identified below: ETSI EN 303 146-1: “Multiradio Interface (MURI)“

17、; ETSI EN 303 146-2: “Reconfigurable Radio Frequency Interface (RRFI)“; ETSI EN 303 146-3: “Unified Radio Application Interface (URAI)“; ETSI TS 103 146-4: “Radio Programming Interface (RPI)“. National transposition dates Date of adoption of this EN: 1 August 2016 Date of latest announcement of this

18、 EN (doa): 30 November 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 May 2017 Date of withdrawal of any conflicting National Standard (dow): 31 May 2017 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may

19、“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 303 146-3 V1

20、.2.1 (2016-08) 5 1 Scope The scope of the present document is to define an information model and protocol for unified radio application interface for mobile device reconfiguration. The work is based on the Use Cases defined in ETSI TR 102 944 i.1, on the system requirements defined in ETSI EN 302 96

21、9 1 and on the radio reconfiguration related architecture for mobile devices defined in ETSI EN 303 095 i.2 and on the mobile device information models and protocols related Multiradio Interface defined ETSI EN 303 146-1 i.3. 2 References 2.1 Normative references References are either specific (iden

22、tified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to

23、be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the applica

24、tion of the present document. 1 ETSI EN 302 969 (V1.2.1) (11-2014): “Reconfigurable Radio Systems (RRS); Radio Reconfiguration related Requirements for Mobile Devices“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version numbe

25、r) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

26、their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 102 944: “Reconfigurable Radio Systems (RRS); Use Cases for Baseband Interfaces for Unified Radio

27、Applications of Mobile Device“. i.2 ETSI EN 303 095 (V1.2.1): “Reconfigurable Radio Systems (RRS); Radio Reconfiguration related Architecture for Mobile Devices“. i.3 ETSI EN 303 146-1: “Reconfigurable Radio Systems (RRS); Mobile Device Information Models and Protocols; Part 1: Multiradio Interface

28、(MURI)“. i.4 ETSI EN 303 146-2: “Reconfigurable Radio Systems (RRS); Mobile Device Information Models and Protocols; Part 2: Reconfigurable Radio Frequency Interface (RRFI)“. i.5 ETSI TR 102 839: “Reconfigurable Radio Systems (RRS); Multiradio Interface for Software Defined Radio (SDR) Mobile Device

29、 Architecture and Services“. i.6 IEEE 1900.4-2009: “IEEE Standard for Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks“. i.7 Recommendation ITU-T X.680: “Information technology - Abstract Sy

30、ntax Notation One (ASN.1): Specification of basic notation“. ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 6 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: association: logical communication link to a Radio Access Networ

31、k or a peer equipment NOTE 1: Typically, some control signalling is necessary to maintain the association. No user data transfer may occur with only an association present, but a data flow may be established into an association for this purpose. NOTE 2: Peer equipment is any communication counterpar

32、t of a reconfigurable mobile device. It can be reached by establishing a logical communication link (i.e. an association) between the reconfigurable mobile device and peer equipment. channel: designated part of the information transfer capability having specified characteristics, provided at the use

33、r network interface NOTE: It is the over-the-air wireless propagation channel which is used to convey an information signal from transmitter to receiver. This definition is specified in ETSI EN 303 095 i.2. communication services layer: layer related to communication services supporting generic appl

34、ications NOTE: A communication services layer supports generic applications like Internet access. In the present document, it consists of Administrator, Mobility Policy Manager (MPM), Networking stack and Monitor. link: connection from one location to another through a given Radio Access Technology

35、for the purpose of transmitting and receiving digital information Radio Application (RA): software which enforces the generation of the transmit RF signals or the decoding of the receive RF signals NOTE 1: The Software is executed on a particular radio platform or an RVM as part of the radio platfor

36、m. NOTE 2: RAs might have different forms of representation. They are represented as: square4 source codes including Radio Library calls of Radio Library native implementation and Radio HAL calls; square4 IRs including Radio Library calls of Radio Library native implementation and radio HAL calls; s

37、quare4 Executable codes for a particular radio platform. radio computer: part of mobile device hardware working under ROS control and on which RAs are executed NOTE: A Radio Computer typically includes programmable processors, hardware accelerators, peripherals, etc. RF part is considered to be part

38、 of peripherals. Radio Control Framework (RCF): control framework which, as a part of the OS, extends OS capabilities in terms of radio resource management NOTE: RCF is a control framework which consists of Configuration Manager (CM), Radio Connection Manager (RCM), Flow Controller (FC) and Multirad

39、io Controller (MRC). The Resource Manager (RM) is typically part of OS. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ASN Abstract Syntax Notation ASN.1 Abstract Syntax Notation One BLER BLock Error Rate ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 7 CM Co

40、nfiguration Manager CSL Communication Services Layer FC Flow ControllerID IDentification MD Mobile Device MPM Mobility Policy Manager MRC MultiRadio ControllerMURI MUltiRadio Interface OS Operating SystemRA Radio Application RAN Radio Access Network RAP Radio Application Package RAT Radio Access Tec

41、hnology RCF Radio Control Framework RCM Radio Connection Manager RF Radio Frequency RM Resource Manager ROS Radio Operating System RPI Radio Programming Interface RRFI Reconfigurable Radio Frequency Interface SINR Signal to Interference plus Noise Ratio UML Unified Modelling Language URA Unified Rad

42、io ApplicationsURAI Unified Radio Application Interface 4 Introduction A reconfigurable MD is capable of running multiple radios simultaneously and of changing the set of radios by loading new Radio Application Package (RAP). All Radio Applications (RAs) are called Unified Radio Applications (URAs)

43、when they exhibit a common behaviour from the reconfigurable MDs point of view i.2. In order to run multiple URAs, the reconfigurable MD will include Communication Services Layer (CSL), Radio Control Framework (RCF), Radio Platform and 4 sets of interfaces for their interconnection. ETSI ETSI EN 303

44、 146-3 V1.2.1 (2016-08) 8 Figure 4.1: Four sets of interfaces for Reconfigurable MD Figure 4.1 illustrates the Reconfigurable MD architecture with the 4 sets of interfaces, i.e.: MURI for interfacing CSL and RCF i.3; RRFI for interfacing URA and RF Transceiver i.4; URAI for interfacing URA and RCF w

45、hich is the scope of the present document; RPI for allowing an independent and uniform production of RAs i.5. The present document defines URAI. ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 9 g90g258g282g349g381g18g381g373g393g437g410g286g396g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g68g

46、104g90g47g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g90g90g38g47g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g90g87g47g1092g1092g349g374g410g286g396g296g258g272g286g1093g1093g47g104g90g4g47Figure 4.2: UML class diagram for Radio Computer interfaces Figure 4.2 illustrate

47、s UML class diagram for Radio Computer interfaces. The reconfigurable MD may be seen as a Radio Computer where individual URAs are engineered as software entities i.2. The present document is organized as follows: clause 5 describes the system identification; clause 6 describes the notational tool f

48、or defining both information model classes and interface classes; clause 7 describes the information model for radio computer; and clause 8 describes the interface definition. While UML is used for defining the information model and protocol related to URAI, other modelling languages could be used a

49、s well. 5 System Identification 5.1 Radio Computer Structure Figure 5.1 illustrates how RCF and URA interact with each other using URAI. ETSI ETSI EN 303 146-3 V1.2.1 (2016-08) 10 Figure 5.1: Interconnection between RCF and URA using URAI for Reconfigurable MD As shown in figure 5.1, URAI supports 3 kinds of services: Radio Application Management Services These services are used by Radio Connection Manager (RCM) which is included in the RCF, to control URA functions such as reporting of discovered Peer Equipments, creati