EN ISO TR 20883-2007 en Footwear - Performance requirements for components for footwear - Shanks《鞋 鞋类组件的性能要求 弓形垫》.pdf

《EN ISO TR 20883-2007 en Footwear - Performance requirements for components for footwear - Shanks《鞋 鞋类组件的性能要求 弓形垫》.pdf》由会员分享，可在线阅读，更多相关《EN ISO TR 20883-2007 en Footwear - Performance requirements for components for footwear - Shanks《鞋 鞋类组件的性能要求 弓形垫》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、PUBLISHED DOCUMENTPD CEN ISO/TR 20883:2007Footwear Performance requirements for components for footwear ShanksICS 61.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44

2、g42g43g55g3g47g36g58PD CEN ISO/TR 20883:2007This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 March 2007 BSI 2007ISBN 978 0 580 50450 1National forewordThis Published Document was published by BSI. It is the UK implementation of CEN ISO/TR

3、 20883:2007.The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented on TCI/69 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

4、 a contract. Users are responsible for its correct application. Amendments issued since publicationAmd. No. Date CommentsTECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN ISO/TR 20883February 2007ICS 61.060English VersionFootwear - Performance requirements for components forfootwear - Shanks (

5、ISO/TR 20883:2007)Chaussures - Exigences de performance pour lescomposants des chaussures - Cambrions (ISO/TR20883:2007)Schuhe - Anforderungen an das Gebrauchsverhalten vonSchuhbestandteilen - Gelenke (ISO/TR 20883:2007)This Technical Report was approved by CEN on 21 August 2060. It has been drawn u

6、p by the Technical Committee CEN/TC 309.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga

7、l,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reser

8、vedworldwide for CEN national Members.Ref. No. CEN ISO/TR 20883:2007: EForeword This document (CEN ISO/TR 20883:2007) has been prepared by Technical Committee CEN/TC 309 “Footwear“, thesecretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 “Footwear“.CEN ISO/TR 2

9、0883:2007Reference numberISO/TR 20883:2007(E)TECHNICAL REPORT ISO/TR20883First edition2007-02-15Footwear Performance requirements for components for footwear Shanks Chaussures Exigences de performance pour les composants des chaussures Cambrions CEN ISO/TR 20883:2007ii iiiForeword ISO (the Internati

10、onal Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been

11、 established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standa

12、rdization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for

13、voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the a

14、rt”, for example), it may decide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn t

15、o the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TR 20883 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 309, Footwear, i

16、n collaboration with Technical Committee ISO/TC 216, Footwear, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). CEN ISO/TR 20883:2007blank1Footwear Performance requirements for components for footwear Shanks 1 Scope This Technical Report establishes t

17、he performance requirements for shanks components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements. T

18、his Technical Report applies to shanks for all kinds of footwear as defined in Clause 3. This Technical Report is intended to be used as a reference between the manufacturer and the supplier. It is not intended for third party certification of finished shoes destined for the consumer. 2 Normative re

19、ferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 31-0, Quantities and units Part 0: G

20、eneral principles ISO 17709, Footwear Sampling location, preparation and duration of conditioning of samples and test pieces ISO 18895, Footwear Test methods for shanks Fatigue resistance ISO 18896, Footwear Test methods for shanks Longitudinal stiffness EN ISO 19952, Footwear Vocabulary 3 Terms and

21、 definitions For the purposes of this document, the terms and definitions given in EN ISO 19952 apply. 4 Requirements 4.1 General This Technical Report establishes performance (essential) requirements, all of which shall be taken into account. No performance requirements are specified for high fashi

22、on footwear. The results of each single analytical determination, as well as the average values, shall be rounded off in accordance with ISO 31-0. When taken from finished footwear, samples shall be prepared in accordance with ISO 17709. CEN ISO/TR 20883:20072 4.2 Performance requirements for shanks

23、 components See Table 1. Table 1 Test methods and properties for various types of footwear Test method Property Requirement ISO 18895 Fatigue resistance Heel height, measured vertically at back less than 50 mm W 3 000 cycles 50 mm to 74 mm W 8 000 cycles 75 mm to 99 mm W 20 000 cycles 100 mm and ove

24、r W 60 000 cycles ISO 18896 Longitudinal stiffness Heel height, measured vertically at back less than 50 mm W 400 kN mm250 mm to 74 mm W 800 kN mm275 mm to 99 mm W 1 200 kN mm2100 mm and over W 1 600 kN mm25 Marking and labelling Marking and labelling is optional. If reference to this Technical Repo

25、rt is made, only shanks complying with all the essential requirements can be marked. In this case, this shall be clearly marked by the manufacturer either directly on the product or by a label with the following additional information. a) The manufacturers name, trade mark or identification mark. b)

26、 Heel height, in millimetres. c) Reference to this Technical Report. d) If the component complies, additional requirements agreed upon between the component supplier and the footwear manufacturer may be specified in the marking or label making reference to the correspondent subclause. Any reference

27、to compliance with this Technical Report shall not be put in a part of the shank which could be visible when the footwear is finished. CEN ISO/TR 20883:2007blankPD CEN ISO/TR 20883:2007BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsi

28、ble for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments

29、 or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on

30、 the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publ

31、ications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those

32、that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services ar

33、e also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price

34、 of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about B

35、SI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be

36、reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and si

37、ze, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.