EN 62841-3-4-2016 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 3-4 Particular requirements for transportable bench g.pdf

《EN 62841-3-4-2016 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 3-4 Particular requirements for transportable bench g.pdf》由会员分享，可在线阅读，更多相关《EN 62841-3-4-2016 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 3-4 Particular requirements for transportable bench g.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、Electric motor-operated hand-held tools, transportabletools and lawn and gardenmachinery SafetyPart 3-4: Particular requirements for transportable bench grindersBS EN 62841-3-4:2016Incorporating corrigendum December 2016(IEC 62841-3-4:2016)BSI Standards PublicationBS EN 62841-3-4:2016 BRITISH STANDA

2、RDNational forewordThis British Standard is the UK implementation of EN 62841-3-4:2016. It is derived from IEC 62841-3-4:2016, incorporating corrigendum December 2016. It supersedes BS EN 61029-2-4:2011 which is withdrawn.The start and finish of text introduced or altered by corrigendum is indicated

3、 in the text by tags. Text altered by CENELEC corrigendum December 2016 is indicated in the text by g67g68.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags g65g66.The UK par

4、ticipation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contrac

5、t. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 89653 8ICS 25.080.50; 25.140.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published unde

6、r the authority of the Standards Policy and Strategy Committee on 28 February 2017.Amendments/corrigenda issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-3-4 June 2016 ICS 25.140.20 Supersedes EN 61029-2-4:2011English Version Electric motor-operate

7、d hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016 , modified) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 3-4: Exigences par

8、ticulires pour les tourets meuler transportables (IEC 62841-3-4:2016 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-4: Besondere Anforderungen fr transportable Tischschleifmaschinen (IEC 62841-3-4:2016 , modi

9、fiziert) This European Standard was approved by CENELEC on 2016-03-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog

10、raphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

11、nsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finla

12、nd, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electr

13、otechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Re

14、f. No. EN 62841-3-4:2016 EBS EN 62841-3-4:2016EN 62841-3-4:2016 2 European foreword The text of document 116/258/FDIS, future edition 1 of IEC 62841-3-4, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 6284

15、1-3-4:2016. A draft amendment, which covers common modifications to IEC 62841-3-4:2016 (116/258/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: g120 latest date by which this document has to be implemented at nationa

16、l level by publication of an identical national standard or by endorsement (dop) 2016-12-24 g120 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-06-24 This document supersedes EN 61029-2-4:2011. This European Standard is divided into four pa

17、rts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or

18、modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-4 is to be used in conjunction with EN 62841-1:2015. This Part 3-4 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the

19、 European Standard: Particular requirements for transportable bench grinders. Where a particular subclause of Part 1 is not mentioned in this Part 3-4, that subclause applies as far as relevant. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to

20、be adapted accordingly. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 a

21、re numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-3-4:2016 are prefixed “Z”. BS EN 62841-3-4:2016EN 62841-3-4:2016 3 This European Standard follows the overall requirements of EN ISO 12100. Attention is drawn to the poss

22、ibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Tr

23、ade Association and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. Compliance with the clauses of Part 1 together with this Part 3-4 provides one means of conforming with the essenti

24、al health and safety requirements of the Directive concerned. BS EN 62841-3-4:2016EN 62841-3-4:2016 Endorsement notice The text of the International Standard IEC 62841-3-4:2016 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 62841-3-4:20164 Annex ZA (normative)

25、 Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated re

26、ferences, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standar

27、ds listed in this annex is available here: www.cenelec.eu. This annex from EN 62841-1:2015 is applicable with the following addition: Publication Year Title EN/HD Year ISO 603-4 1999 Bonded abrasive products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding - - 5 EN 628

28、41-3-4:2016 BS EN 62841-3-4:20166 Annex ZZ (informative) Relationship between this European Standard and the essential requirements of Directive 2006/42/EC 2006 OJ L157 aimed to be covered This European Standard has been prepared under a Commissions standardization request M/396 to provide one volun

29、tary means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC 2006 OJ L157. Once this standard is cited in the Official Journal of the European Union under that Directive, complian

30、ce with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European S

31、tandard and Annex I of Directive 2006/42/EC Essential Requirements of Directive 2006/42/EC Clause(s) / sub-clause(s) of this EN Remarks / Notes Annex I All clauses All corresponding requirements are covered by complying with all clauses. WARNING 1: Presumption of conformity stays valid only as long

32、as a reference to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2: Other Union legislation may be applicable t

33、o the product(s) falling within the scope of this standard. EN 62841-3-4:2016 BS EN 62841-3-4:2016 2 IEC 62841-3-4:2016 IEC 2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references. 6 3 Terms and definitions 6 4 General requirements 7 5 General conditions for the tests 7 6 Radiation, toxicity and

34、 similar hazards . 7 7 Classification . 7 8 Marking and instructions 7 9 Protection against access to live parts . 9 10 Starting . 9 11 Input and current . 9 12 Heating . 9 13 Resistance to heat and fire 9 14 Moisture resistance . 9 15 Resistance to rusting . 9 16 Overload protection of transformers

35、 and associated circuits 9 17 Endurance . 10 18 Abnormal operation . 10 19 Mechanical hazards . 10 20 Mechanical strength . 14 21 Construction 16 22 Internal wiring 17 23 Components 17 24 Supply connection and external flexible cables and cords . 17 25 Terminals for external conductors 17 26 Provisi

36、on for earthing . 17 27 Screws and connections 17 28 Creepage distances, clearances and distances through insulation 17 Annexes . 22 Annex I (informative) Measurement of noise and vibration emissions 22 Bibliography . 23 Figure 101 Bench grinder . 18 Figure 102 Opening angles and dimensions for a gu

37、ard 19 Figure 103 Transparent screen . 20 Figure 104 Bench grinder with inclinable work rest . 20 Figure 105 Flange dimensions 21 Table 4 Required performance levels . 10 Table 101 Minimum flange dimensions (see Figure 105) . 13 BS EN 62841-3-4:2016(normative) Measurement of noise and vibration emis

38、sions IEC 62841-3-4:2016 IEC 2016 3 Table g20g19g21g3g237g3g55g72g86g87g3g87g82g85g84g88g72g3g73g82g85g3g73g79g68g81g74g72g86 . 13 Table g20g19g22g3g237g3g42g88g68g85g71g3g87g75g76g70g78g81g72g86g86g3g73g82g85g3g86g87g72g72g79 . 15 Table g20g19g23g3g237g3g42g88g68g85g71g3g87g75g76g70g78g81g72g86g86g

39、3g73g82g85g3g68g79g88g80g76g81g76g88g80 . 15 Table 105 Minimum tool spindle diameter . 16 Table I.101 Operating conditions for bench grinders . 22 BS EN 62841-3-4:2016 4 IEC 62841-3-4:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOO

40、LS AND LAWN AND GARDEN MACHINERY SAFETY Part 3-4: Particular requirements for transportable bench grinders FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). Th

41、e object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specif

42、ications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations

43、liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters ex

44、press, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Comm

45、ittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Natio

46、nal Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does

47、not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have

48、 the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoe

49、ver, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held